The effect of indirect UV/ozone treatment on pentacene thin film transistors with double-stacked organic gate insulators
Source abstract
Abstract
Abstract We investigated the indirect UV/ozone treatment, which means treating the insulator surface under tens of nanometers, rather than the direct surface of the insulator. The double-stacked organic layers are used as gate insulator and the UV/ozone treatment is conducted between these two layers. We analyzed the surface morphologies of the gate insulator and the pentacene by atomic force microscopy (AFM) to confirm the effect of indirect UV/ozone treatment. The UV/ozone treatment reduced the surface roughness of the upper side gate insulator and increased the pentacene grain size. Pentacene-based thin film transistors were fabricated and the electrical property improvement after this treatment was examined. The largest improvement was found when the UV/ozone treatment time is 10 min and the upper side gate insulator thickness is 20 nm, and the mobility at that condition is 1.21 cm2/V s, which is larger than three times that without UV/ozone treatment (0.33 cm2/V s).
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Organic Light-Emitting Diodes Research · Organic Electronics and Photovoltaics · Thin-Film Transistor Technologies
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (20)
Show source-provided references
1. Flexible spray-coated TIPS-pentacene organic thin-film transistors as ammonia gas sensors10.1039/c3tc31412j ↗
2. High performance, foldable, organic memories based on ultra-low voltage, thin film transistors10.1016/j.orgel.2014.09.037 ↗
3. Solution-processed barium zirconate titanate for pentacene-based thin-film transistor and memory10.1109/LED.2013.2273365 ↗
4. Efficient blue organic light-emitting diodes employing thermally activated delayed fluorescence10.1038/nphoton.2014.12 ↗
5. Low power programmable shift register with depletion mode oxide TFTs for high resolution and high frame rate AMFPDs
6. Correlation between ambient air and continuous bending stress for the electrical reliability of flexible pentacene-based thin-film transistors10.7567/JJAP.54.011602 ↗
7. Flexible electrophoretic display driven by solution-processed organic TFT with highly stable bending feature10.1016/j.orgel.2014.09.039 ↗
8. Flexible semitransparent pentacene thin-film transistors with polymer dielectric layers and NiOx electrodes10.1063/1.1996839 ↗
9. Transparent flexible organic thin-film transistors that use printed single-walled carbon nanotube electrodes10.1063/1.2181190 ↗
10. Surface-treatment effects on organic thin-film transistors10.1016/j.synthmet.2004.08.034 ↗
11. The role of OTS density on pentacene and C60 nucleation, thin film growth, and transistor performance10.1002/adfm.200801727 ↗
12. Two-step surface modification for bottom-contact structured pentacene thin-film transistors10.1016/j.orgel.2016.12.040 ↗
13. Effects of polar functional groups and roughness topography of polymer gate dielectric layers on pentacene field-effect transistors10.1016/j.orgel.2006.12.007 ↗
14. Effect of surface energy on pentacene thin-film growth and organic thin film transistor characteristics10.1143/JJAP.48.031501 ↗
15. Effect of UV/ozone treatment on hysteresis of pentacene thin-film transistor with polymer gate dielectric10.1016/j.sse.2009.04.005 ↗
16. Effects of UV/ozone treatment of a polymer dielectric surface on the properties of pentacene thin films for organic transistors10.1063/1.2951905 ↗
17. Influence of the dielectric roughness on the performance of pentacene transistors10.1063/1.1815042 ↗
18. Effect of dielectric roughness on performance of pentacene TFTs and restroation of performance with a polymeric smoothing layer10.1021/jp044318f ↗
19. High mobility of pentacene field-effect transistors with polyimide gate dielectric layers10.1063/1.1739508 ↗
20. Improved performance of OLEDs with ITO surface treatments10.1016/j.tsf.2004.08.111 ↗