Photomultiplication-type perovskite photodetectors base on air-processed perovskite films
Source abstract
Abstract
Perovskites have shown potential applications in low-cost and high-performance optoelectronic devices because of their solution processability and inherent outstanding optoelectronic properties. Among them, perovskite photodetectors have been the focus of scientific researches. Here, a photomultiplication-type perovskite photodetector is successfully fabricated with the high-quality perovskite films by spinning-bathing-spinning method in ambient air, which overcomes the stringent environmental requirement of the preparation of perovskite films. The photomultiplication photoconductive gain is realized by the traps-enhanced hole injection by capturing photogenerated electrons. The deep trap states provided by MoO 3 capture the generated electrons in active layer, which causes the interfacial trap-assisted hole-tunneling injection, thus forming the gain. Consequently, the photomultiplication-type perovskite photodetector achieves a high external quantum efficiency over 52800% and exhibits a fast photoresponse time about 18.5 μs.
Source: expertdata · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Perovskite Materials and Applications · Ga2O3 and related materials · Quantum Dots Synthesis And Properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (32)
Show source-provided references
1. A review on organic-inorganic halide perovskite photodetectors: device engineering and fundamental physics10.1002/adma.201605242 ↗
2. Perovskite-based photodetectors: materials and devices10.1039/C6CS00896H ↗
3. Recent progress on photomultiplication type organic photodetectors10.1002/lpor.201800204 ↗
4. Filter-free narrowband photomultiplication-type planar heterojunction organic photodetectors
5. Highly sensitive, broad-band organic photomultiplication-type photodetectors covering UV-Vis-NIR10.1039/D1TC00555C ↗
6. Highly sensitive broadband photomultiplication type all-polymer photodetectors and their applications in optical pulse counting10.1039/D2TC02144G ↗
7. Recent progress on highly sensitive perovskite photodetectors10.1039/C8TC06089D ↗
8. Solution-processed hybrid perovskite photodetectors with high detectivity10.1038/ncomms6404 ↗
9. Trapped-electron-induced hole injection in perovskite photodetector with controllable gain
10. High-gain and low-driving-voltage photodetectors based on organolead triiodide perovskites10.1002/adma.201405116 ↗
11. PbS quantum dots-induced trap-assisted charge injection in perovskite photodetectors10.1016/j.nanoen.2016.09.035 ↗
12. Challenges for commercializing perovskite solar cells10.1126/science.aat8235 ↗
13. Improved air stability of perovskite solar cells via solution-processed metal oxide transport layers10.1038/nnano.2015.230 ↗
14. Tailoring solvent coordination for high-speed, room-temperature blading of perovskite photovoltaic films10.1126/sciadv.aax7537 ↗
15. Air‐processed perovskite films with inner‐to‐outside passivation for high‐efficiency solar cells10.1002/solr.202000410 ↗
16. High performance photomultiplication perovskite photodetectors with PC60BM and NPB as the interlayers10.1016/j.orgel.2017.09.028 ↗
17. Sequential deposition as a route to high-performance perovskite-sensitized solar cells10.1038/nature12340 ↗
18. Surfactant-controlled ink drying enables high-speed deposition of perovskite films for efficient photovoltaic modules10.1038/s41560-018-0153-9 ↗
19. Argon plasma treatment to tune perovskite surface composition for high efficiency solar cells and fast photodetectors10.1002/adma.201705176 ↗
20. Structure design and performance of photomultiplication-type organic photodetectors based on an aggregation-induced emission material10.1039/C9NR09386A ↗
21. Achieving EQE of 16,700% in P3HT:PC71BM based photodetectors by trap-assisted photomultiplication10.1038/srep09181 ↗
22. Research progress in organic photomultiplication photodetectors10.3390/nano8090713 ↗
23. Hybrid organic-inorganic perovskite photodetectors10.1002/smll.201702107 ↗
24. Surface-charge accumulation effects on open-circuit voltage in organic solar cells based on photoinduced impedance analysis10.1039/C3CP54908A ↗
25. Thermal annealing effect on internal electrical polarization in organic solar cells10.1016/j.orgel.2013.05.016 ↗
26. Engineering graphene quantum dots for enhanced ultraviolet and visible light p-Si nanowire-based photodetector10.1021/acsami.7b07667 ↗
27. Trap engineering of CdTe nanoparticle for high gain, fast response, and low noise P3HT:CdTe nanocomposite photodetectors10.1002/adma.201502292 ↗
28. A highly sensitive narrowband nanocomposite photodetector with gain10.1002/adma.201503774 ↗
29. A filterless, visible-blind, narrow-band, and near-infrared photodetector with a gain10.1039/C6NR02902G ↗
30. Sensitive photodetection with photomultiplication effect in an interfacial Eu2+/3+ complex on a mesoporous TiO2 film10.1021/acsami.7b18200 ↗
31. Capillary-bridge mediated assembly of conjugated polymer arrays toward organic photodetectors10.1002/adfm.201701347 ↗
32. Influence of device architectures and mobility on response/recovery time of metal halide perovskites: a review10.1007/s10853-021-06678-4 ↗