journal article·2022-12

Benzothiadiazole-based push-pull copolymers – Balancing synthetic complexity against organic solar cell efficiency

Kaat Valkeneers, Koen Vandewal, Wouter Maes

Organic Electronics· Volume 111
Publisher page

Abstract

Over the last two decades, an enormous number of new polymeric materials have been developed for organic photovoltaics, with the power conversion efficiencies of the best solar cell devices now exceeding 18%. The top-performing photoactive materials are generally rather complex, requiring extensive synthetic work. Low-cost, large-scale device manufacturing, however, demands a facile fabrication process. Therefore, simple synthetic building blocks such as benzothiadiazole are obviously most attractive from an economic as well as sustainability point of view. In this review, an overview is given of the numerous push-pull type conjugated polymers using benzothiadiazole and its derivatives as the electron-poor building block, and their performance in organic solar cells is discussed. Rather simple polymers such as PffBT4T or PPhI-ffBT afford reasonable efficiencies around 13%, whereas more complex ones, like D18, can compete with the best performing materials out there to date.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Organic Electronics and Photovoltaics · Conducting polymers and applications · Perovskite Materials and Applications

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (100+)

Show source-provided references
1. Polymer photovoltaic cells: enhanced efficiencies via a network of internal donor-acceptor heterojunctions10.1126/science.270.5243.1789 ↗
2. Single-junction organic photovoltaic cell with 19% efficiency10.1002/adma.202102420 ↗
3. Asymmetric side-chain substitution enables a 3D network acceptor with hydrogen bond assisted crystal packing and enhanced electronic coupling for efficient organic solar cells10.1039/D2EE01848A ↗
4. Heteroheptacene-based acceptors with thieno[3,2-b]pyrrole yield high-performance polymer solar cells10.1093/nsr/nwac076 ↗
5. Isomerization of asymmetric ladder-type heteroheptacene-based small-molecule acceptors improving molecular packing: efficient nonfullerene organic solar cells with excellent fill factors10.1002/adfm.202203200 ↗
6. Organic solar cell materials toward commercialization10.1002/smll.201801793 ↗
7. Organic solar cells—the path to commercial success10.1002/aenm.202002653 ↗
8. Pre- and postharvest treatment with alternatives to synthetic fungicides to control postharvest decay of sweet cherry10.1016/j.postharvbio.2012.12.004 ↗
9. Relation between structure and herbicidal activity of substituted benzothiadiazoles (2,1,3)10.1111/j.1365-3180.1967.tb01371.x ↗
10. Synthesis and antibacterial activity of some 5-(4-biphenylyl)-7-aryl[3,4-d] [1,2,3]-benzothiadiazoles10.1016/j.ejmech.2005.01.005 ↗
11. Benzothiadiazole derivatives as fluorescence imaging probes: beyond classical scaffolds10.1021/ar500468p ↗
12. Synthesis and tuning optical nonlinear properties of molecular crystals of benzothiadiazole10.1021/jp103159b ↗
13. Heteroannulated acceptors based on benzothiadiazole10.1039/C4MH00102H ↗
14. Color-stable deep red-emitting OLEDs based on a soluble terpolymer containing fluorene, thiophene and benzothiadiazole units10.1016/j.synthmet.2012.06.021 ↗
15. Polarized light emission from aligned luminescent liquid crystal films based on 4,7-disubstituted-2,1,3-benzothiadiazoles10.1016/j.synthmet.2008.12.014 ↗
16. Organic dyes incorporating low-band-gap chromophores based on π-extended benzothiadiazole for dye-sensitized solar cells10.1016/j.dyepig.2011.03.015 ↗
17. Length–dependence of conductance in benzothiadiazole molecular wires between graphene nanoribbon electrodes: effect of conformational changes10.1016/j.molliq.2018.08.085 ↗
18. Benzothiadiazole and its π-extended, heteroannulated derivatives: useful acceptor building blocks for high-performance donor–acceptor polymers in organic electronics10.1039/C6TC01860B ↗
19. Recent developments in the synthesis of 1,2,5-thiadiazoles and 2,1,3-benzothiadiazoles10.1055/s-0039-1690679 ↗
20. Tuning the molecular weight of chlorine-substituted polymer donors for small energy loss10.1002/cjoc.202000735 ↗
21. Benzothiadiazole-based conjugated polymers for organic solar cells10.1007/s10118-021-2537-8 ↗
22. A-DA′D-A non-fullerene acceptors for high-performance organic solar cells10.1007/s11426-020-9799-4 ↗
23. Nonfullerene acceptors: a renaissance in organic photovoltaics?10.1002/aenm.202001788 ↗
24. Recent advances in high-performance organic solar cells enabled by acceptor–donor–acceptor–donor–acceptor (A–DA′D–A) type acceptors10.1039/D0QM00305K ↗
25. Low band-Gap conjugated polymers with strong interchain aggregation and very high hole mobility towards highly efficient thick-film polymer solar cells10.1002/adma.201305092 ↗
26. Molecular weight tuning of low bandgap polymers by continuous flow chemistry: increasing the applicability of PffBT4T for organic photovoltaics10.1039/C7TA05627C ↗
27. Charge carrier dynamics in PffBT4T-2OD: PCBM organic solar cells10.1016/j.orgel.2018.08.018 ↗
28. Comprehensive investigation and analysis of bulk-heterojunction microstructure of high-performance PCE11:PCBM solar cells10.1021/acsami.8b22539 ↗
29. Aggregation and morphology control enables multiple cases of high-efficiency polymer solar cells
30. Efficient organic solar cells processed from hydrocarbon solvents10.1038/nenergy.2015.27 ↗
31. Molecular engineering of highly efficient small molecule nonfullerene acceptor for organic solar cells10.1002/adfm.201603820 ↗
32. High-performance non-fullerene acceptor derived from diathiafulvalene wings for solution-processed organic photovoltaics10.1021/acs.jpcc.6b07778 ↗
33. A high-performance non-fullerene acceptor compatible with polymers with different bandgaps for efficient organic solar cells10.1002/solr.201800376 ↗
34. Influence of blend morphology and energetics on charge separation and recombination dynamics in organic solar cells incorporating a nonfullerene acceptor10.1002/adfm.201704389 ↗
35. Overcoming space-charge effect for efficient thick-film non-fullerene organic solar cells10.1002/aenm.201801609 ↗
36. Amorphous polymer acceptor containing B ← N units matches various polymer donors for all-polymer solar cells10.1021/acs.macromol.9b01394 ↗
37. Influence of donor polymer on the molecular ordering of small molecular acceptors in nonfullerene polymer solar cells10.1002/aenm.201701674 ↗
38. Unraveling the efficiency-limiting morphological issues of the perylene diimide-based non-fullerene organic solar cells
39. Spirobifluorene-cored wide bandgap non-fullerene small molecular acceptor with 3D structure for organic solar cells10.1016/j.dyepig.2018.11.016 ↗
40. Reduced voltage losses yield 10% efficient fullerene free organic solar cells with >1 V open circuit voltages10.1039/C6EE02598F ↗
41. An efficient, “burn in” free organic solar cell employing a nonfullerene electron acceptor10.1002/adma.201701156 ↗
42. Highly efficient and reproducible nonfullerene solar cells from hydrocarbon solvents10.1021/acsenergylett.7b00390 ↗
43. Combining energy transfer and optimized morphology for highly efficient ternary polymer solar cells10.1002/aenm.201602552 ↗
44. Achieving over 11% power conversion efficiency in PffBT4T-2OD-based ternary polymer solar cells with enhanced open-circuit-voltage and suppressed charge recombination10.1016/j.nanoen.2017.12.005 ↗
45. The effect of dihydronaphthyl-based C60 bisadduct as a third-component material on Charge-Carrier dynamics, photovoltaic performance, and stability10.1016/j.jpowsour.2018.09.055 ↗
46. Balance between energy transfer and exciton separation in ternary organic solar cells with two conjugated polymer donors10.1021/acsaem.0c00740 ↗
47. Ga-doped ZnO as an electron transport layer for PffBT4T-2OD: PC70BM organic solar cells10.1016/j.orgel.2017.01.028 ↗
48. Realizing 11.3% efficiency in PffBT4T-2OD fullerene organic solar cells via superior charge extraction at interfaces10.1007/s00339-018-1867-z ↗
49. Understanding and controlling morphology evolution via DIO plasticization in PffBT4T-2OD/PC 71 BM devices
50. Simultaneous performance and stability improvement of polymer:fullerene solar cells by doping with piperazine10.1039/C8TA12109E ↗
51. PCE11-based polymer solar cells with high efficiency over 13% achieved by room-temperature processing10.1039/D0TA02271C ↗
52. Morphology changes upon scaling a high-efficiency, solution-processed solar cell10.1039/C6EE01623E ↗
53. High-performance large-area organic solar cells enabled by sequential bilayer processing via nonhalogenated solvents10.1002/aenm.201802832 ↗
54. Room temperature processed polymers for high-efficient polymer solar cells with power conversion efficiency over 910.1016/j.nanoen.2017.05.008 ↗
55. High-performance and uniform 1 cm2 polymer solar cells with D1-A-D2-A-type random terpolymers
56. Random copolymerization realized high efficient polymer solar cells with a record fill factor near 8010.1016/j.nanoen.2019.04.048 ↗
57. Critical role of polymer aggregation and miscibility in nonfullerene-based organic photovoltaics10.1002/aenm.201902430 ↗
58. Highly efficient large-area organic photovoltaic module with a 350 nm thick active layer using a random terpolymer donor10.1021/acs.chemmater.9b05399 ↗
59. Room temperature and non-halogenated solvent processed terpolymers for high-efficient polymer solar cells10.1016/j.dyepig.2020.109023 ↗
60. Effect of molecular orientation of donor polymers on charge generation and photovoltaic properties in bulk heterojunction all-polymer solar cells10.1002/aenm.201601365 ↗
61. An extended π-conjugated area of electron-donating units in D-A structured polymers towards high-mobility field-effect transistors and highly efficient polymer solar cells10.1039/C7TC00428A ↗
62. Efficient nonfullerene organic solar cells with small driving forces for both hole and electron transfer10.1002/adma.201804215 ↗
63. Benzothiadiazole halogenation impact in conjugated polymers, a comprehensive study10.1021/acs.macromol.9b01760 ↗
64. Ring fusion of thiophene-vinylene-thiophene (TVT) benefits both fullerene and non-fullerene polymer solar cells10.1021/acs.macromol.8b00805 ↗
65. Side-chain effect in ethenylene fused thiophene-vinylene-thiophene (ETVT) based photovoltaic polymers10.1016/j.polymer.2019.01.064 ↗
66. Drastic changes in properties of donor-acceptor polymers induced by asymmetric structural isomers for application to polymer solar cells10.1021/acsami.8b19449 ↗
67. Donor-acceptor polymers based on 5,6-difluoro-benzo[1,2,5]thiadiazole for high performance solar cells10.1016/j.orgel.2016.03.024 ↗
68. Selenophene-incorporated quaterchalcogenophene-based donor-acceptor copolymers to achieve efficient solar cells with Jsc exceeding 20 mA/cm210.1021/acs.chemmater.7b03688 ↗
69. Synergistic effect of chlorination and selenophene: achieving elevated solar conversion in highly aggregated systems10.1021/acs.macromol.8b02445 ↗
70. A difluorobenzothiadiazole-based conjugated polymer with alkylthiophene as the side chains for efficient, additive-free and thick-film polymer solar cells10.1039/C7TA06332F ↗
71. High efficiency polymer solar cells based on alkylthio substituted benzothiadiazole-quaterthiophene alternating conjugated polymers10.1016/j.orgel.2016.10.032 ↗
72. Tuning of electronic properties of novel donor–acceptor polymers containing oligothiophenes with electron-withdrawing ester groups10.1007/s00289-020-03212-5 ↗
73. Enhancing the power conversion efficiency of polymer solar cells to 9.26% by a synergistic effect of fluoro and carboxylate substitution10.1039/C6TA02622B ↗
74. Enhancing polymer photovoltaic performance via optimized intramolecular ester-based noncovalent Sulfur···Oxygen interactions10.1021/acs.macromol.8b00161 ↗
75. Understanding the influence of carboxylate substitution on the property of high-performance donor polymers in non-fullerene organic solar cells10.1039/C8QM00101D ↗
76. Functionalizing benzothiadiazole with non-conjugating ester groups as side chains in a donor-acceptor polymer improves solar cell performance10.1039/C8NJ05850D ↗
77. Impact of solution temperature-dependent aggregation on the solid-state packing and electronic properties of polymers for organic photovoltaics10.1039/C8TC05378B ↗
78. Drastic effects of fluorination on backbone conformation of head-to-head bithiophene-based polymer semiconductors10.1021/acsmacrolett.8b00032 ↗
79. Face-on orientation of fluorinated polymers conveyed by long alkyl chains: a prerequisite for high photovoltaic performances10.1039/C8TA04127J ↗
80. Optimizing F content of donor units by ternary copolymerization for effective heterojunction solar cells10.1016/j.synthmet.2018.10.015 ↗
81. Design and synthesis of chlorinated benzothiadiazole-based polymers for efficient solar energy conversion10.1021/acsenergylett.7b00092 ↗
82. A chlorinated π-conjugated polymer donor for efficient organic solar cells10.1016/j.joule.2018.05.010 ↗
83. An open-circuit voltage and power conversion efficiency study of fullerene ternary organic solar cells based on oligomer/oligomer and oligomer/polymer10.1002/marc.201700090 ↗
84. Effects on photovoltaic performance of dialkyloxy-benzothiadiazole copolymers by varying the thienoacene donor10.1021/acsami.6b12670 ↗
85. Enhancing the performance of polymer solar cells by using donor polymers carrying discretely distributed side chains10.1021/acsami.7b04369 ↗
86. Study of burn-in loss in green solvent-processed ternary blended organic photovoltaics derived from UV-crosslinkable semiconducting polymers and nonfullerene acceptors
87. Thiophene-benzothiadiazole based D-A1-D-A2 type alternating copolymers for polymer solar cells10.1039/C7PY00696A ↗
88. Structure-property relationship of D-A type copolymers based on thienylenevinylene for organic electronics10.1016/j.orgel.2017.03.033 ↗
89. A-D1-A-D2-type regioregular and random terpolymers based on oligothiophene and dialkyloxy- benzothiadiazole units for polymer solar cells10.1016/j.synthmet.2018.11.007 ↗
90. Narrow bandgap difluorobenzochalcogenadiazole-based polymers for high-performance organic thin-film transistors and polymer solar cells10.1039/D0NJ01006E ↗
91. Vinylene-bridged difluorobenzo[c] [1,2,5]-thiadiazole (FBTzE): a new electron-deficient building block for high-performance semiconducting polymers in organic electronics10.1039/C8TC05764H ↗
92. Insight into the synthesis and fabrication of 5,6-alt-benzothiadiazole-based D–π–A-conjugated copolymers for bulk-heterojunction solar cell10.1007/s00289-017-2193-x ↗
93. Toward high efficiency polymer solar cells: rearranging the backbone units into a readily accessible random tetrapolymer10.1002/aenm.201701668 ↗
94. Highly efficient, green-solvent processable, and stable non-fullerene polymer solar cells enabled by a random polymer donor10.1016/j.orgel.2020.105874 ↗
95. Insights into the synthesis of pillar[5]arene and its conversion into pillar[6]arene10.1039/C9QO00176J ↗
96. Practical ligand-free copper-catalysed short-chain alkoxylation of unactivated aryl bromides10.1002/ejoc.201500500 ↗
97. Semi-crystalline photovoltaic polymers with efficiency exceeding 9% in a ∼300 nm thick conventional single-cell device10.1039/C4EE01529K ↗
98. Simple and versatile non-fullerene acceptor based on benzothiadiazole and rhodanine for organic solar cells10.1021/acsami.9b09256 ↗
99. Nonfullerene/fullerene acceptor blend with a tunable energy state for high-performance ternary organic solar cells10.1021/acsami.8b06445 ↗
100. Water compatible direct (Hetero)arylation polymerization of PPDT2FBT: a pathway towards large-scale production of organic solar cells10.1002/ajoc.202000231 ↗