Tailoring perovskite conversion and grain growth by in situ solvent assisted crystallization and compositional variation for highly efficient perovskite solar cells
Source abstract
Abstract
Abstract The performance of perovskite solar cell devices is strongly dependent on the morphology, crystallinity, and phase purity of perovskite films. However, the complete conversion of PbI2 into perovskite and tailoring perovskite grain growth as well as its surface morphology are challenging in the conventional two-step sequential deposition method. In this study, a facile and effective approach was developed to improve perovskite conversion rate and film quality via in situ solvent assisted crystallization (ISAC) and compositional adjustment. It was found that in the presence of in situ solvent molecules, CH3NH3I (MAI) molecules readily intercalated in the PbI2 lattice to form small-grain (∼210 nm) MAPbI3 perovskite. By partially substituting MAI with a small amount of CH(NH2)2I (FAI), flat FAxMA1–xPbI3 films composed of much larger grains (∼450 nm) could be obtained due to the in situ formation and decomposition of (MA)2Pb3I8(DMSO)2 intermediates. Photovoltaic devices based on ISAC-FAxMA1–xPbI3 films exhibited an enhanced efficiency of 17.31% under AM 1.5G solar illumination at 100 mW cm−2 when compared to the devices based on ISAC-MAPbI3 films (14.30%), which can be mainly ascribed to the higher optical absorption and reduced defect density of the former. The results highlight the distinct effects of in situ solvent molecules on perovskite crystallization dynamics in various material systems and the importance of in situ solvent molecules in perovskite conversion, film morphology, and even device performance.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Perovskite Materials and Applications · Quantum Dots Synthesis And Properties · Chalcogenide Semiconductor Thin Films
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (30)
Show source-provided references
1. Perovskite solar cells: from materials to devices10.1002/smll.201402767 ↗
2. High-efficiency solution-processed perovskite solar cells with millimeter-scale grains10.1126/science.aaa0472 ↗
3. Square‐centimeter solution‐processed planar CH3NH3PbI3 perovskite solar cells with efficiency exceeding 15%10.1002/adma.201502586 ↗
4. Solvent engineering for high-performance inorganic-organic hybrid perovskite solar cells10.1038/nmat4014 ↗
5. A fast deposition-crystallization procedure for highly efficient lead iodide perovskite thin‐film solar cells10.1002/anie.201405334 ↗
6. Sequential deposition as a route to high-performance perovskite-sensitized solar cells10.1038/nature12340 ↗
7. Efficient, high yield perovskite photovoltaic devices grown by interdiffusion of solution-processed precursor stacking layers10.1039/C4EE01138D ↗
8. Efficient planar heterojunction perovskite solar cells by vapour deposition10.1038/nature12509 ↗
9. A comparative study of one-step and two-step approaches for MAPbI3 perovskite layer and its influence on the performance of mesoscopic perovskite solar cell10.1016/j.cplett.2017.12.012 ↗
10. Mesoporous PbI2 scaffold for high-performance planar heterojunction perovskite solar cells
11. Identifying the molecular structures of intermediates for optimizing the fabrication of high-quality perovskite films10.1021/jacs.6b04924 ↗
12. Effects of 4-tert-butylpyridine on perovskite formation and performance of solution-processed perovskite solar cells10.1039/C5TA05988G ↗
13. High-performance photovoltaic perovskite layers fabricated through intramolecular exchange10.1126/science.aaa9272 ↗
14. High performance of planar perovskite solar cells produced from PbI2(DMSO) and PbI2(NMP) complexes by intramolecular exchange10.1002/admi.201500768 ↗
15. Accelerated formation and improved performance of CH3NH3PbI3-based perovskite solar cells via solvent coordination and anti-solvent extraction10.1039/C6TA10526B ↗
16. Solvent annealing of perovskite-induced crystal growth for photovoltaic-device efficiency enhancement10.1002/adma.201401685 ↗
17. Formamidinium lead trihalide: a broadly tunable perovskite for efficient planar heterojunction solar cells10.1039/c3ee43822h ↗
18. High-efficiency rubidium-incorporated perovskite solar cells by gas quenching10.1021/acsenergylett.6b00697 ↗
19. Mixed‐organic‐cation perovskite photovoltaics for enhanced solar‐light harvesting10.1002/anie.201309361 ↗
20. Effects of formamidinium and bromide ion substitution in methylammonium lead triiodide toward high-performance perovskite solar cells10.1016/j.nanoen.2016.02.033 ↗
21. Enhanced device performance and stability of perovskite solar cells with low-temperature ZnO/TiO2 bilayered electron transport layers10.1039/C8RA03162B ↗
22. Unveiling a key intermediate in solvent vapor postannealing to enlarge crystalline domains of organometal halide perovskite films
23. Highly reproducible perovskite solar cells with average efficiency of 18.3% and best efficiency of 19.7% fabricated via Lewis base adduct of lead (II) iodide10.1021/jacs.5b04930 ↗
24. A multifunctional poly-N-vinylcarbazole interlayer in perovskite solar cells for high stability and efficiency: a test with new triazatruxene-based hole transporting materials10.1039/C6TA09314K ↗
25. Planar-structure perovskite solar cells with efficiency beyond 21%10.1002/adma.201703852 ↗
26. Understanding and tailoring grain growth of lead-halide perovskite for solar cell application10.1021/acsami.7b10022 ↗
27. Morphology evolution of high efficiency perovskite solar cells via vapor induced intermediate phases10.1021/jacs.6b09656 ↗
28. Recombination in polymer-fullerene bulk heterojunction solar cells10.1103/PhysRevB.82.245207 ↗
29. Interpretation and evolution of open-circuit voltage, recombination, ideality factor and subgap defect states during reversible light-soaking and irreversible degradation of perovskite solar cells10.1039/C7EE02415K ↗
30. Hybrid passivated colloidal quantum dot solids10.1038/nnano.2012.127 ↗