journal article·2019-01

Synthesis of low band-gap 2D conjugated polymers and their application for organic field effect transistors and solar cells

Fuchuan Liu, Hang Wang, Yangqian Zhang, Xin Wang, Shiming Zhang

Publisher page

Abstract

Abstract Two donor-acceptor (D-A) 2-dimensional (2D) conjugated polymers P1 and P2 based on isoindigo (ID) and thienoisoindigo (TID) as acceptor unit and 4,8-bis(5-(2-ethylhexyl)thiophen-2-yl)benzo[1,2-b:4,5-b´]dithiophene (BDT-T) as donor unit were prepared via Stille coupling and characterized by solution-possessed organic field effect transistors (OFETs) and organic solar cells (OSCs), respectively. By changing the electron-withdrawing component of the conjugated polymer backbone from ID to TID, there have also been diversities in the optical absorption, thermal stability, molecular structure, electrochemical energy level, charge mobility and photovoltaic properties of these two polymers. P1 and P2 exhibited intrinsic p-type semiconductor characteristic with hole mobilities of 3.0 × 10−2 and 1.2 × 10−2 cm2 V−1 s−1, respectively. When blended with the [6,6]-phenyl-C61-butyric acid methyl ester (PC61BM), the highest power conversion efficiency (PCE) of P1 and P2 were 2.40% and 1.28%, respectively. Our results suggest that ID and TID units are useful building blocks for the further development of efficient organic optical-electrical materials.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Organic Electronics and Photovoltaics · Perovskite Materials and Applications · Conducting polymers and applications

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (57)

Show source-provided references
1. Highly efficient solid-state near-infrared organic light-emitting diodes incorporating A-D-A dyes based on alpha,beta-unsubstituted "BODIPY" moieties10.1038/s41598-017-01785-2 ↗
2. Fluorescent supramolecular polymers based on Pillar[5]arene for OLED device fabrication10.1021/acsmacrolett.7b00309 ↗
3. Effect of monofluoro substitution on the optoelectronic properties of benzo[c][1,2,5]thiadiazole based organic semiconductors10.1021/acs.macromol.6b00185 ↗
4. Polymer light-emitting diodes with cathodes printed from conducting Ag paste10.1002/adma.200602567 ↗
5. Regioregular bis-pyridal[2,1,3]thiadiazole-based semiconducting polymer for high-performance ambipolar transistors10.1021/jacs.7b10256 ↗
6. Bis-Diketopyrrolopyrrole moiety as a promising building block to enable balanced ambipolar polymers for flexible transistors10.1002/adma.201606162 ↗
7. Dithiopheneindenofluorene (TIF) semiconducting polymers with very high mobility in field-effect transistors10.1002/adma.201702523 ↗
8. Molecular optimization enables over 13% efficiency in organic solar cells10.1021/jacs.7b02677 ↗
9. Two-dimensional benzo[1,2-b:4,5-b′]difuran-based wide bandgap conjugated polymers for efficient fullerene-free polymer solar cells10.1039/C7TA10976H ↗
10. An electron acceptor challenging fullerenes for efficient polymer solar cells10.1002/adma.201404317 ↗
11. Recent advances in nonfullerene acceptors for organic solar cells10.1002/marc.201700555 ↗
12. Constructing a strongly absorbing low-bandgap polymer acceptor for high-performance all-polymer solar cells10.1002/anie.201707678 ↗
13. Synthesis and characterization of thieno-isoindigo derivative-based near-infrared conjugated polymer for ambipolar field-effect transistors and photothermal conversion10.1016/j.dyepig.2017.07.073 ↗
14. Control of mesoscale morphology and photovoltaic performance in diketopyrrolopyrrole-based small band gap terpolymers10.1002/aenm.201601138 ↗
15. Wide-bandgap conjugated polymers based on alkylthiofuran-substituted benzo[1,2-b:4,5-b′]difuran for efficient fullerene-free polymer solar cells10.1021/acs.macromol.7b02676 ↗
16. High-quality conjugated polymers via one-pot Suzuki–Miyaura homopolymerization10.1039/C7RA03539J ↗
17. (Semi)ladder-Type bithiophene imide-based all-acceptor semiconductors: synthesis, structure-property correlations, and unipolar n-type transistor performance10.1021/jacs.8b02144 ↗
18. Thiazole imide-based all-acceptor homopolymer: achieving high-performance unipolar electron transport in organic thin-film transistors10.1002/adma.201705745 ↗
19. Effects of bithiophene imide fusion on the device performance of organic thin-film transistors and all-polymer solar cells10.1002/anie.201708421 ↗
20. A new quinoxaline and isoindigo based polymer as donor material for solar cells: role of ecofriendly processing solvents on the device efficiency and stability10.1002/pola.28361 ↗
21. Isoindigo-based polymer photovoltaics: modifying polymer molecular structures to control the nanostructural packing motif10.1039/C6CP03273G ↗
22. Thienoisoindigo-based copolymer with fused thieno[3,2-b]thiophene as a donor in thin film transistor applications with high performance10.1039/C4TC02355B ↗
23. An ultra-narrow bandgap derived from thienoisoindigo polymers: structural influence on reducing the bandgap and self-organization10.1039/C5PY01870F ↗
24. Synthesis of isoindigo-based oligothiophenes for molecular bulk heterojunction solar cells10.1021/ol902512x ↗
25. Dithienocarbazole and isoindigo based amorphous low bandgap conjugated polymers for efficient polymer solar cells10.1002/adma.201303586 ↗
26. A new thiophene substituted isoindigo based copolymer for high performance ambipolar transistors10.1039/c2cc30169e ↗
27. Thienoisoindigo end-capped molecular donors for organic photovoltaics: effect of the central π-conjugated connector10.1016/j.dyepig.2017.05.046 ↗
28. Phthalimide end-capped thienoisoindigo and diketopyrrolopyrrole as non-fullerene molecular acceptors for organic solar cells10.1039/C5TA09171C ↗
29. Solution-processable thienoisoindigo-based molecular donors for organic solar cells with high open-circuit voltage10.1016/j.dyepig.2014.12.004 ↗
30. Solution processable low bandgap thienoisoindigo-based small molecules for organic electronic devices10.1039/C5RA07889J ↗
31. Low-bandgap donor–acceptor polymers for photodetectors with photoresponsivity from 300 nm to 1600 nm10.1039/C6TC05031J ↗
32. Ultra-narrow bandgap D-A copolymer based on thienoisoindigo acceptor unit for application in polymer solar cells with energy losses below 0.6 eV10.1016/j.synthmet.2016.06.004 ↗
33. Ultra-narrow-bandgap thienoisoindigo polymers: structure–property correlations in field-effect transistors10.1039/C6TC03693G ↗
34. A thienoisoindigo-naphthalene polymer with ultrahigh mobility of 14.4 cm2/V s that substantially exceeds benchmark values for amorphous silicon semiconductors10.1021/ja504537v ↗
35. Fluorinated benzothienoisoindigo copolymers for organic solar cells: a comparative study on polymer orientation and device performance10.1246/cl.170307 ↗
36. Bandgap and molecular energy level control of conjugated polymer photovoltaic materials based on benzo[1,2-b:4,5-b′]dithiophene10.1021/ma800820r ↗
37. A low bandgap polymer based on isoindigo and bis(dialkylthienyl)benzodithiophene for organic photovoltaic applications10.1002/pola.26275 ↗
38. A polybenzo[1,2-b:4,5-b']dithiophene derivative with deep HOMO level and its application in high-performance polymer solar cells10.1002/anie.200906934 ↗
39. A facile strategy to enhance absorption coefficient and photovoltaic performance of two-dimensional benzo[1,2-b:4,5-b′]dithiophene and thieno[3,4-c]pyrrole-4,6-dione polymers via subtle chemical structure variations10.1016/j.orgel.2013.07.006 ↗
40. Highly efficient 2d-conjugated benzodithiophene-based photovoltaic polymer with linear alkylthio side chain10.1021/cm501513n ↗
41. Interplay of molecular orientation, film formation, and optoelectronic properties on isoindigo- and thienoisoindigo-based copolymers for organic field effect transistor and organic photovoltaic applications10.1021/acs.chemmater.5b03197 ↗
42. Synthesis and photovoltaic properties of new low bandgap isoindigo-based conjugated polymers10.1021/ma102357b ↗
43. Simply complex: the efficient synthesis of an intricate molecular acceptor for high-performance air-processed and air-tested fullerene-free organic solar cells10.1021/acs.chemmater.6b04862 ↗
44. Applying direct heteroarylation synthesis to evaluate organic dyes as the core component in PDI-based molecular materials for fullerene-free organic solar cells10.1039/C7TA00318H ↗
45. Low-bandgap conjugated polymer for high efficient photovoltaic applications10.1039/c0cc01087a ↗
46. Novel conjugated polymers prepared by direct (hetero) arylation: an eco-friendly tool for organic electronics10.3390/molecules23020408 ↗
47. Indacenodithiophene-based wide bandgap copolymers for high performance single-junction and tandem polymer solar cells10.1016/j.nanoen.2017.01.050 ↗
48. A planar electron acceptor for efficient polymer solar cells10.1039/C5EE02477C ↗
49. Tin-free direct C-H arylation polymerization for high photovoltaic efficiency conjugated copolymers10.1021/jacs.6b10023 ↗
50. Side chain engineering on medium bandgap copolymers to suppress triplet formation for high-efficiency polymer solar cells10.1002/adma.201703344 ↗
51. Non-Fullerene polymer solar cells based on alkylthio and fluorine substituted 2d-conjugated polymers reach 9.5% efficiency10.1021/jacs.6b01744 ↗
52. Synthesis and properties of small band gap thienoisoindigo based conjugated polymers10.1039/c2jm34668k ↗
53. Structure–property relationships directing transport and charge separation in isoindigo polymers10.1021/acs.macromol.6b00540 ↗
54. Near-infrared photovoltaic performance of conjugated polymers containing thienoisoindigo acceptor units10.1002/macp.201300426 ↗
55. Near-infrared absorbing thienoisoindigo-based copolymers for organic photovoltaics10.1021/jp4104728 ↗
56. Tuning Carrier transport properties of thienoisoindigo-based copolymers by loading fluorine atoms onto the diarylethylene-based electron-donating units10.1016/j.polymer.2017.10.055 ↗
57. Thienoisoindigo-based low-band gap polymers for organic electronic devices10.1039/C2PY20699D ↗