Stable photovoltaic cells based on graphene oxide/indium zinc oxide bilayer anode buffer
Source abstract
Abstract
We report a solution-processed graphene oxide (GO) functioned as an anode buffer layer in organic photovoltaic cells (OPVs). The OPVs using indium zinc oxide (IZO), IZO/GO, GO/IZO, and poly(3,4-thylenedioxythiophene) doped poly(styrene sulfonate) (PEDOT:PSS) as a control device, exhibited the conversion efficiency of 3.4%, 3.5%, 3.9% and 3.4%, respectively. No obvious degradation was discovered for the OPVs with incorporating GO as one of the anode buffer layers after 1 h continuous illumination under AM1.5. On the other hand, after only 1 h continuous illumination, a momentous degradation was observed for the OPVs without the presence of GO. All these results demonstrate that the GO layer plays an important role in the improvement of the stability with conventional device architecture.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Organic Electronics and Photovoltaics · Conducting polymers and applications · Nanowire Synthesis and Applications
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (25)
Show source-provided references
1. Photoinduced electron transfer from a conducting polymer to Buckminsterfullerene10.1126/science.258.5087.1474 ↗
2. Organic photovoltaics: technology and market10.1016/j.solmat.2004.02.030 ↗
3. 2.5% Efficient organic plastic solar cells10.1063/1.1345834 ↗
4. Effect of solution processed graphene oxide/nickel oxide bi-layer on cell performance of bulk-heterojunction organic photovoltaic10.1016/j.solmat.2011.06.008 ↗
5. Evolution of electrical, chemical, and structural properties of transparent and conducting chemically derived graphene thin films10.1002/adfm.200900166 ↗
6. Indium-doped zinc oxide films prepared by simultaneous r.f. and d.c. magnetron sputtering10.1002/(SICI)1096-9918(199908)28:1<271::AID-SIA592>3.0.CO;2-1 ↗
7. ZnO: In deposition by spray pyrolysis – influence of the growth conditions on the electrical and optical properties10.1016/j.tsf.2007.05.078 ↗
8. Indium-doped ZnO thin films deposited by the sol–gel technique10.1016/j.tsf.2005.04.043 ↗
9. Influence of photo-induced degradation on the optoelectronic properties of regioregular poly(3-hexylthiophene)10.1016/j.solmat.2008.01.002 ↗
10. Durability of MDMO–PPV and MDMO–PPV: PCBM blends under illumination in the absence of oxygen10.1016/j.solmat.2007.12.003 ↗
11. Photo-degradation and stabilization effects in operating organic photovoltaic devices by joint photo-current and morphological monitoring10.1016/j.solmat.2008.02.019 ↗
12. Small molecular weight organic thin-film photodetectors and solar cells10.1063/1.1534621 ↗
13. Small-molecule organic solar cells with improved stability10.1016/j.cplett.2005.09.052 ↗
14. Influence of molecular architecture and intermixing on the photovoltaic, morphological and spectroscopic properties of CuPc–C60 heterojunctions10.1016/j.solmat.2004.02.027 ↗
15. Degradation of small-molecule organic solar cells10.1063/1.2422911 ↗
16. Accurate measurement and characterization of organic solar cells10.1002/adfm.200600489 ↗
17. Efficient bulk heterojunction photovoltaic cells using small-molecular-weight organic thin films10.1038/nature01949 ↗
18. Stability/degradation of polymer solar cells10.1016/j.solmat.2008.01.005 ↗
19. Aging of flat heterojunction zinc phthalocyanine/fullerene C60 organic solar cells10.1016/j.orgel.2009.12.010 ↗
20. ACS Performance and stability improvement of P3HT:PCBM-based solar cells by thermally evaporated chromium oxide (CrOx) interfacial layer10.1021/am100541d ↗
21. Consensus stability testing protocols for organic photovoltaic materials and devices10.1016/j.solmat.2011.01.036 ↗
22. Improved inverted organic solar cells with a sol–gel derived indium-doped zinc oxide buffer layer10.1109/JSTQE.2009.2039200 ↗
23. Stability/degradation of polymer solar cells10.1016/j.solmat.2008.01.005 ↗
24. Lifetimes of organic photovoltaics: photochemistry, atmosphere effects and barrier layers in ITO-MEHPPV:PCBM-aluminium devices10.1016/j.solmat.2004.09.002 ↗
25. L.M. Popescu, Dissertation, University of Gronigen, p. 73. (Chapter 5).