Electrical characterization of poly(amide-imide) for application in organic field effect devices
Source abstract
Abstract
Abstract The admittance spectra and current–voltage ( I – V ) characteristics are reported of metal–insulator–metal (MIM) and metal–insulator–semiconductor (MIS) capacitors employing cross-linked poly(amide–imide) (c-PAI) as the insulator and poly(3-hexylthiophene) (P3HT) as the active semiconductor. The capacitance of the MIM devices are constant in the frequency range from 10 Hz to 100 kHz, with tan δ values as low as 7 × 10 −3 over most of the range. Except at the lowest voltages, the I – V characteristics are well-described by the Schottky equation for thermal emission of electrons from the electrodes into the insulator. The admittance spectra of the MIS devices displayed a classic Maxwell–Wagner frequency response from which the transverse bulk hole mobility was estimated to be ∼2 × 10 −5 cm 2 V −1 s −1 or ∼5 × 10 −8 cm 2 V −1 s −1 depending on whether or not the surface of the insulator had been treated with hexamethyldisilazane (HMDS) prior to deposition of the P3HT. From the maximum loss observed in admittance-voltage plots, the interface trap density was estimated to be ∼5 × 10 10 cm −2 eV −1 or ∼9 × 10 10 cm −2 eV −1 again depending whether or not the insulator was treated with HMDS. We conclude, therefore, that HMDS plays a useful role in promoting order in the P3HT film as well as reducing the density of interface trap states. Although interposing the P3HT layer between the insulator and the gold electrode degrades the insulating properties of the c-PAI, nevertheless, they remain sufficiently good for use in organic electronic devices.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Organic Electronics and Photovoltaics · Conducting polymers and applications · Semiconductor materials and devices
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (28)
Show source-provided references
1. Mark · 1999
2. Alves · Appl. Phys. Lett. · 2008 · 92 · 10331210.1063/1.2897238 ↗
3. Akkerman · Nature · 2006 · 441 · 6910.1038/nature04699 ↗
4. Vicca · Thin Solid Films · 2010 · 519 · 39110.1016/j.tsf.2010.08.009 ↗
5. Calhoun · Phys. Rev. Lett. · 2007 · 98 · 09640210.1103/PhysRevLett.98.096402 ↗
6. Taylor · Appl. Phys. Lett. · 2006 · 89 · 18351210.1063/1.2382727 ↗
7. Veres · Chem. Mater. · 2004 · 16 · 454310.1021/cm049598q ↗
8. Facchetti · Adv. Mater. · 2005 · 17 · 170510.1002/adma.200500517 ↗
9. Y.O.S. Kasai, US Patent 4,379,879 (1983).
10. Copeland · J. Appl. Polym. Sci. · 1992 · 44 · 4110.1002/app.1992.070440105 ↗
11. Rich · J. Appl. Polym. Sci. · 1997 · 65 · 115110.1002/(SICI)1097-4628(19970808)65:6<1151::AID-APP11>3.0.CO;2-X ↗
12. Bryce · Thin Solid Films · 2004 · 458 · 23310.1016/j.tsf.2003.11.268 ↗
13. Balogh · J. Appl. Polym Sci. · 2007 · 103 · 84110.1002/app.25189 ↗
14. Nicollian · 1982
15. Torres · J. Appl. Phys. · 2005 · 98 · 07371010.1063/1.2081109 ↗
16. Taylor · J. Appl. Phys. · 2008 · 103 · 05450910.1063/1.2844435 ↗
17. Ullah · J. Appl. Phys. · 2009 · 106 · 11450510.1063/1.3267045 ↗
18. Product properties for Dupont Teflon® AF. Dupont Guides:, (last accessed on 26/05/2012).
19. Sze · 1981
20. Lilly · J. Appl. Phys. · 1968 · 39 · 14110.1063/1.1655720 ↗
21. Lampert · Phys. Rev. · 1956 · 103 · 164810.1103/PhysRev.103.1648 ↗
22. Torres · Appl. Phys. Lett. · 2004 · 85 · 31410.1063/1.1769081 ↗
23. Chirvase · Synth. Met. · 2003 · 138 · 29910.1016/S0379-6779(03)00027-4 ↗
24. Kalbitz · Org. Electron. · 2012 · 13 · 87510.1016/j.orgel.2012.01.034 ↗
25. Tanase · Phys. Rev. Lett. · 2003 · 91 · 21660110.1103/PhysRevLett.91.216601 ↗
26. Hill · Solid State Electron. · 1980 · 23 · 98710.1016/0038-1101(80)90064-7 ↗
27. Taylor · J. Phys. D: Appl. Phys. · 1971 · 4 · 134610.1088/0022-3727/4/9/315 ↗
28. B.V. Hamon, Proc. IEE (London) 99, Part IV (1952), 151.10.1049/pi-4.1952.0016 ↗