journal article·2021-06

Enhancing the photovoltaic performance with two similar structure polymers as donors by broadening the absorption spectrum and optimizing the molecular arrangement

Zhiyong Liu

Publisher page

Abstract

Abstract Ternary organic photovoltaics (OPVs) were fabricated with two polymers (PM6 and D18) as the donor and the fullerene-free small molecule Y6 as the acceptor in an inverted structure. The blueshifted absorption spectrum of neat D18 relative to neat PM6 can enable harvesting of more short and medium wavelength photons in the ternary photoactive layer, which is beneficial to increasing the short-circuit current density (JSC). The enhancement of the open-circuit voltage (VOC) of the ternary OPVs can be explained by the deeper HOMO level of D18 than that of PM6, which is beneficial to broadening the energy bandgap. In addition, the combination of the cascade LUMO levels among D18, PM6 and Y6 and the enhanced crystallinity can lead to more efficient exciton dissociation and charge transport within the ternary films. As a result, the power conversion efficiency of the optimize ternary OPV is 15.85%, which is higher than those of the PM6:Y6- and D18:Y6-base binary OPVs (PCEs of 14.70% and 14.95%, respectively). The results indicate that ternary OPVs with a blend of two similar chemical structure polymers as the donor could achieve high performance by broadening the light spectrum and optimizing the phase separation and crystallinity.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Organic Electronics and Photovoltaics · Conducting polymers and applications · Perovskite Materials and Applications

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (67)

Show source-provided references
1. Stability/degradation of polymer solar cells10.1016/j.solmat.2008.01.005 ↗
2. Recent advances in polymer solar cells: realization of high device performance by incorporating water/AlcoholSoluble conjugated polymers as electrode buffer layer10.1002/adma.201303391 ↗
3. A critical review on semitransparent organic solar cells10.1016/j.nanoen.2020.105376 ↗
4. A critical review on efficient thick-film organic solar cells10.1002/solr.202000364 ↗
5. Single-junction organic solar cell with over 15% efficiency using fused-ring acceptor with electron-deficient core10.1016/j.joule.2019.01.004 ↗
6. 18% Efficiency organic solar cells10.1016/j.scib.2020.01.001 ↗
7. A correlation between small-molecule dependent nanomorphology and device performance of organic light-emitting diodes with ternary blend emitting layers10.1039/C7TC02404E ↗
8. Over 17% efficiency ternary organic solar cells enabled by two non-fullerene acceptors working in alloy-like model10.1039/C9EE03710A ↗
9. Understanding the effect of the third component PC71BM on nanoscale morphology and photovoltaic properties of ternary organic solar cells10.1002/solr.201900540 ↗
10. Approaching 18% efficiency of ternary organic photovoltaics with wide bandgap polymer donor and well compatible Y6:Y6-1O as acceptor
11. Solvent additive-free ternary polymer solar cells with 16.27% efficiency10.1016/j.scib.2019.03.024 ↗
12. 16.67% rigid and 14.06% flexible organic solar cells enabled by ternary heterojunction strategy10.1002/adma.201902210 ↗
13. A minimal benzo[c][1,2,5]thiadiazole-based electron acceptor as a third component material for ternary polymer solar cells with efficiencies exceeding 16.0%10.1039/C9MH00993K ↗
14. Highly efficient quaternary organic photovoltaics by optimizing photogenerated exciton distribution and active layer morphology10.1016/j.nanoen.2020.104496 ↗
15. Alloy-like ternary polymer solar cells with over 17.2% efficiency10.1016/j.scib.2020.01.012 ↗
16. Ternary organic photovoltaic cells exhibiting 17.59% efficiency with two compatible Y6 derivations as acceptor10.1002/solr.202100007 ↗
17. 16.5% efficiency ternary organic photovoltaics with two polymer donors by optimizing molecular arrangement and phase separation10.1016/j.nanoen.2020.104447 ↗
18. Single-layered organic photovoltaics with double cascading charge transport pathways: 18% efficiencies10.1038/s41467-020-20580-8 ↗
19. Two compatible polymer donors contribute synergistically for ternary organic solar cells with 17.53% efficiency10.1039/D0EE02516J ↗
20. The effect of alkyl chain branching positions on the electron mobility and photovoltaic performance of naphthodithiophene diimide (NDTI)-based polymers10.1007/s11426-019-9645-1 ↗
21. 13.34 % efficiency non-fullerene all-small-molecule organic solar cells enabled by modulating the crystallinity of donors via a fluorination strategy10.1002/anie.201910297 ↗
22. High-performance ternary polymer solar cells using wide-bandgap biaxially extended octithiophene-based conjugated polymers10.1039/C8TC01542B ↗
23. Photo-physics of PTB7, PCBM and ICBA based ternary solar cells10.1016/j.orgel.2016.04.022 ↗
24. Introducing fluorine and sulfur atoms into quinoxaline-based p-type polymers to gradually improve the performance of fullerene-free organic solar cells10.1021/acsmacrolett.9b00368 ↗
25. Understanding energetic disorder in electron-deficient-core-based non-fullerene solar cells10.1007/s11426-020-9747-9 ↗
26. Asymmetric selenophene-based non-fullerene acceptors for high-performance organic solar cells10.1039/C8TA11197A ↗
27. Recombination dynamics as a key determinant of open circuit voltage in organic bulk heterojunction solar cells: a comparison of four different donor polymers10.1002/adma.201002360 ↗
28. Highly stable inverted organic photovoltaics using aluminum-doped zinc oxide as electron transport layers10.1016/j.jpowsour.2014.11.011 ↗
29. Over 16.7% efficiency of ternary organic photovoltaics by employing extra PC71BM as morphology regulator10.1007/s11426-019-9634-5 ↗
30. Enhanced efficiency and stability of nonfullerene ternary polymer solar cells based on spontaneously assembled active layer: the role of a high mobility small molecular electron acceptor
31. Stable large area organic solar cells realized by using random terpolymers donors combined with a ternary blend10.1039/C9TA03188J ↗
32. Ternary organic solar cells: compatibility controls for morphology evolution of active layers10.1039/C7TC03565A ↗
33. Forster resonance energy transfer and morphology optimization for high-performance ternary organic photodetectors10.1016/j.orgel.2019.01.020 ↗
34. A chlorinated low-bandgap small-molecule acceptor for organic solar cells with 14.1% efficiency and low energy loss10.1007/s11426-018-9334-9 ↗
35. Highly efficient and thermally stable polymer solar cells with dihydronaphthyl-based 70 fullerene bisadduct derivative as the acceptor10.1002/adfm.201102771 ↗
36. Ternary bulk heterojunction solar cells: addition of soluble NIR dyes for photocurrent generation beyond 800 nm10.1021/am5007172 ↗
37. Planar benzofuran inside-fused perylenediimide dimers for high V-OC fullerene-free organic solar cells10.1021/acsami.8b19563 ↗
38. Optimal bulk-heterojunction morphology enabled by fibril network strategy for high-performance organic solar cells10.1007/s11426-019-9478-2 ↗
39. Tuning Voc for high performance organic ternary solar cells with non-fullerene acceptor alloys10.1039/C7TA06237K ↗
40. Achieving high-performance ternary organic solar cells through tuning acceptor alloy10.1002/adma.201603154 ↗
41. High-efficiency ternary nonfullerene polymer solar cells with increased phase purity and reduced nonradiative energy loss10.1039/C9TA12029G ↗
42. As-cast ternary organic solar cells based on an asymmetric side-chains featured acceptor with reduced voltage loss and 14.0% efficiency10.1002/adfm.201909535 ↗
43. Solution-processed organic solar cells with high open-circuit voltage of 1.3 V and low non-radiative voltage loss of 0.16 V10.1002/adma.202002122 ↗
44. Improved photostability in ternary blend organic solar cells: the role of [70]PCBM10.1039/C8TC06621C ↗
45. Over 14.5% efficiency and 71.6% fill factor of ternary organic solar cells with 300 nm thick active layers10.1039/C9EE04020J ↗
46. Enhanced performance and stability of ternary organic solar cells utilizing two similar structure blend fullerene-free molecules as electron acceptor10.1002/adom.201901241 ↗
47. A nonfullerene acceptor with alkylthio- and dimethoxy-thiophene-groups yielding high-performance ternary organic solar cells10.1002/solr.201900353 ↗
48. Ternary organic solar cells with small nonradiative recombination loss10.1021/acsenergylett.9b00681 ↗
49. Complementary light absorption and efficient exciton dissociation lead to efficient and excellent ternary polymer solar cells10.1039/C9TA12046G ↗
50. J71 based ternary organic photovoltaics exhibiting 13.65% efficiency10.1039/D0SE00605J ↗
51. Ternary organic solar cells with NC(70)BA as a third component material exhibit high open-circuit voltage and small energy losses10.1016/j.jpowsour.2019.227442 ↗
52. Interface bonding engineering of a transparent conductive electrode towards highly efficient and mechanically flexible ITO-free organic solar cells10.1039/C9TA02900A ↗
53. Recent progress on broadband organic photodetectors and their applications10.1002/lpor.202000262 ↗
54. 14.46% efficiency small molecule organic photovoltaics enabled by the well trade-off between phase separation and photon harvesting10.1016/j.jechem.2020.09.025 ↗
55. Enhancing performance of ternary blend photovoltaics by tuning the side chains of two-dimensional conjugated polymer10.1016/j.orgel.2019.05.002 ↗
56. High-efficiency ternary nonfullerene organic solar cells fabricated with a near infrared acceptor enhancing exciton utilization and extending absorption10.1039/C9TC03534F ↗
57. 16.55% efficiency ternary organic solar cells enabled by incorporating a small molecular donor10.1039/C9TA10145D ↗
58. Ultraviolet to near -infrared broadband organic photodetectors with photomultiplication10.1016/j.orgel.2020.105739 ↗
59. Photomultiplication type organic photodetectors with tunable spectral response range10.1016/j.orgel.2019.03.055 ↗
60. Morphology-Dependent hole transfer under negligible HOMO difference in non-fullerene acceptor-based ternary polymer solar cells10.1021/acsami.8b20884 ↗
61. Mechanically robust and high-performance ternary solar cells combining the merits of all-polymer and fullerene blends10.1039/C7TA11382J ↗
62. Semitransparent polymer solar cells with 9.06% efficiency and 27.1% average visible transmittance by employing a smart strategy10.1039/C9TA00907H ↗
63. Smart geometrical approach to intercalate a highly absorbing and quite resistive electron donor layer in ternary organic photovoltaic cells10.1016/j.orgel.2019.105463 ↗
64. Employing a narrow-band-gap mediator in ternary solar cells for enhanced photovoltaic performance10.1021/acsami.9b23516 ↗
65. Improving molecular planarity by changing alkyl chain position enables 12.3% efficiency all‐small‐molecule organic solar cells with enhanced carrier lifetime and reduced recombination10.1002/solr.201900326 ↗
66. Small energy loss in ternary organic solar cells with a blend of cascade energy levels two fullerene-free acceptors as the electron acceptor10.1039/C9TC03210J ↗
67. Over 15.7% efficiency of ternary organic solar cells by employing two compatible acceptors with similar LUMO levels10.1002/smll.202000441 ↗