Facile method for enhancing conductivity of printed carbon nanotubes electrode via simple rinsing process
Source abstract
Abstract
Abstract We report a simple rinsing process to enhance the conductivity of printed carbon nanotube (CNT) electrodes. Polystyrene sulfonate(PSS)-wrapped CNTs were well dispersed in ethanol for printing via electrohydrodynamic (EHD) jet printing. PSS as a surfactant reduces the conductivity of CNT electrodes, restricting their applications in electronic devices. Even though the PSS rinsing process is necessary, it promotes delamination of CNTs. The challenges associated with the rinsing process and the delamination of CNTs were overcome in this study by introducing a polymer, poly(vinyl butyral-co-vinyl alcohol-co-vinyl acetate) (P(VB-co-VA-co-VAc)) as an adhesion layer. The use of P(VB-co-VA-co-VAc) increased the adhesion between the CNTs printed by the EHD jet technique and the underlying substrate during the CNT rinsing process. The rinsing process led to a significant enhancement in the conductivity of the CNT electrodes, and these electrodes were applied to organic field-effect transistor devices based on TIPS-pentacene. The device exhibited a high field-effect mobility of 0.25 cm2/(V·s).
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Carbon Nanotubes in Composites · Electrohydrodynamics and Fluid Dynamics · Advanced Sensor and Energy Harvesting Materials
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (28)
Show source-provided references
1. Carbon nanotubes: present and future commercial applications10.1126/science.1222453 ↗
2. Thermal conduction phenomena in carbon nanotubes and related nanostructured materials10.1103/RevModPhys.85.1295 ↗
3. Mechanical, electrical and thermal properties of aligned carbon nanotube/polyimide composites10.1016/j.compositesb.2013.08.064 ↗
4. Small but strong: a review of the mechanical properties of carbon nanotube–polymer composites10.1016/j.carbon.2006.02.038 ↗
5. Tensile loading of ropes of single wall carbon nanotubes and their mechanical properties10.1103/PhysRevLett.84.5552 ↗
6. Pressure-sensitive adhesive composites with a hydrophobic form of graphene oxide for enhanced thermal conductivity10.1007/s13233-016-4151-0 ↗
7. Intrinsically stretchable polymer light-emitting devices using carbon nanotube-polymer composite electrodes10.1002/adma.201101986 ↗
8. Organic light-emitting diodes having carbon nanotube anodes10.1021/nl061616a ↗
9. Highly bendable, transparent thin-film transistors that use carbon-nanotube-based conductors and semiconductors with elastomeric dielectrics10.1002/adma.200501740 ↗
10. Carbon nanotube solar cells10.1371/journal.pone.0037806 ↗
11. Super-stretchable, transparent carbon nanotube-based capacitive strain sensors for human motion detection10.1038/srep03048 ↗
12. Effects of dispersion surfactants on the properties of ceramic–carbon nanotube (CNT) nanocomposites10.1016/j.ceramint.2013.06.031 ↗
13. Effects of surfactants on the electronic transport properties of thin-film transistors of single-wall carbon nanotubes10.1021/jp3113254 ↗
14. Functionalized pentacene: improved electronic properties from control of solid-state order10.1021/ja0162459 ↗
15. Direct patterning of conductive carbon nanotube/polystyrene sulfonate composites via electrohydrodynamic jet printing for use in organic field-effect transistors10.1039/C6TC01371F ↗
16. Spray deposition of electrohydrodynamically atomized polymer mixture for active layer fabrication in organic photovoltaics10.1016/j.solmat.2010.04.057 ↗
17. Classification of the modes of ehd spraying10.1016/S0021-8502(98)00058-5 ↗
18. Deposition of nano-hydroxyapatite particles utilising direct and transitional electrohydrodynamic processes10.1007/s10856-008-3436-z ↗
19. Characterization of self-adhesive structural tapes modified with polyvinyl acetal resins10.1016/j.ijadhadh.2015.12.024 ↗
20. Mobile ionic impurities in poly(vinyl alcohol) gate dielectric: possible source of the hysteresis in organic field-effect transistors10.1002/adma.200701479 ↗
21. Grafting fluorinated polymer nanolayer for advancing the electrical stability of organic field-effect transistors10.1021/cm5030266 ↗
22. Hysteresis-free organic field-effect transistors and inverters using photocrosslinkable poly(vinyl cinnamate) as a gate dielectric10.1063/1.2907974 ↗
23. Hysteresis of pentacene thin-film transistors and inverters with cross-linked poly(4-vinylphenol) gate dielectrics10.1063/1.2733626 ↗
24. Influence of the dielectric roughness on the performance of pentacene transistors10.1063/1.1815042 ↗
25. Dependence of pentacene crystal growth on dielectric roughness for fabrication of flexible field-effect transistors10.1021/am900652h ↗
26. The effect of gate-dielectric surface energy on pentacene morphology and organic field-effect transistor characteristics10.1002/adfm.200400486 ↗
27. Morphology and electronic transport of polycrystalline pentacene thin-film transistors10.1063/1.1578536 ↗
28. Organic field-effect transistors with gate dielectric films of poly- p -xylylene derivatives prepared by chemical vapor deposition10.1143/JJAP.42.6614 ↗