journal article·2013-03Open access

Amphiphilic semiconducting copolymer as compatibility layer for printing polyelectrolyte-gated OFETs

Hiam Sinno, Ha Tran Nguyen, Anders Hägerström, Mats Fahlman, Linda Lindell, Olivier Coulembier, Philippe Dubois, Xavier Crispin, Isak Engquist, Magnus Berggren

Organic Electronics· Volume 14· Issue 3

Abstract

We report a method for inkjet-printing an organic semiconductor layer on top of the electrolyte insulator layer in polyelectrolyte-gated OFETs by using a surface modification treatment to overcome the underlying wettability problem at this interface. The method includes depositing an amphiphilic diblock copolymer (P3HT- b-PDMAEMA). This material is designed to have one set of blocks that mimics the hydrophobic properties of the semiconductor (poly(3-hexylthiophene) or P3HT), while the other set of blocks include polar components that improve adhesion to the polyelectrolyte insulator. Contact angle measurements, atomic force microscopy, and X-ray photoelectron spectroscopy confirm formation of the desired surface modification film. Successful inkjet printing of a smooth semiconductor layer allows us to manufacture complete transistor structures that exhibit low-voltage operation in the range of 1 V.
Source: expertdata · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Organic Electronics and Photovoltaics · Nanofabrication and Lithography Techniques · Nanomaterials and Printing Technologies

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (20)

Show source-provided references
1. Interface engineering for organic electronics10.1002/adfm.200902236 ↗
2. Organic materials for printed electronics10.1038/nmat1817 ↗
3. Low-voltage polymer field-effect transistors gated via a proton conductor10.1002/adma.200600871 ↗
4. Insulator polarization mechanisms in polyelectrolyte-gated organic field-effect transistors10.1002/adfm.200900588 ↗
5. Polymer field-effect transistor gated via a poly(styrenesulfonic acid) thin film10.1063/1.2358315 ↗
6. Printed sub-2 V gel-electrolyte-gated polymer transistors and circuits10.1002/adfm.200901845 ↗
7. Printable ion-gel gate dielectrics for low-voltage polymer thin-film transistors on plastic10.1038/nmat2291 ↗
8. Current modulation of a hygroscopic insulator organic field-effect transistor10.1063/1.1811798 ↗
9. All-printed low-voltage organic transistors10.1016/j.orgel.2008.06.016 ↗
10. Electrical characteristics of ink-jet printed, all-polymer electrochemical transistors10.1016/j.orgel.2011.11.010 ↗
11. Simplified large-area manufacturing of organic electrochemical transistors combining printing and a self-aligning laser ablation step10.1002/adfm.201102827 ↗
12. Inkjet printing for materials and devices10.1021/cm0101632 ↗
13. Dewetting of conducting polymer inkjet droplets on patterned surfaces10.1038/nmat1073 ↗
14. Inkjet printed electronics: the wet on wet approach10.1016/j.cep.2011.02.001 ↗
15. Investigation of ink-jet printing of poly-3-octylthiophene for organic field-effect transistors from different solutions10.1016/j.synthmet.2004.05.034 ↗
16. Novel regioregular poly(3-hexylthiophene)-based polycationic block copolymers10.1007/s00289-010-0257-2 ↗
17. High photovoltaic performance of inkjet printed polymer: fullerene blends10.1002/adma.200700911 ↗
18. Neuronal adhesion and differentiation driven by nanoscale surface free-energy gradients10.1016/j.biomaterials.2010.01.099 ↗
19. Evaluation of the Lifshitz-van der Waals/acid-base approach to determine interfacial tensions10.1021/la00016a057 ↗
20. Conductivity, morphology, interfacial chemistry, and stability of poly(3,4-ethylene dioxythiophene)–poly(styrene sulfonate): a photoelectron spectroscopy study10.1002/polb.10659 ↗