journal article·2015-07

Nano-engineering of hybrid organic heterojunctions with carbon nanotubes to improve photovoltaic performance

N. Aamina Nismy, K.D.G. Imalka Jayawardena, A.A. Damitha T. Adikaari, S. Ravi P. Silva

Publisher page

Abstract

Abstract Organic–inorganic hybrid photovoltaics are beginning to show significant promise as a low cost highly efficient route towards renewable energy generation. Of the hybrid architectures available, carbon nanotube incorporated organic photovoltaics is considered to be among the most promising. Herein, the optical and electronic effects of localizing multiwalled carbon nanotubes in the donor polymer is investigated in comparison to its incorporation into the bulk heterojunction architecture (triple heterojunction scheme) through photoluminescence quenching and dark diode characteristics analysis. A significant improvement in photoluminescence quenching is observed when the nanotubes are localized in the donor polymer where the active layer is formed through a sequential deposition route in comparison to the triple heterojunction scheme. However, the former architecture also leads to a higher recombination of carriers due to the introduction of trap states as observed through space charge limited conduction analysis. In comparison, the triple heterojunction scheme shows a lower dark current and hence a significantly improved photovoltaic device performance (3.8% in comparison to 2.6% for the sequentially deposited architecture). This indicates that the formation of the triple heterojunction is the more ideal scheme for improving device performances in organic–inorganic hybrid architectures.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Organic Electronics and Photovoltaics · Conducting polymers and applications · Carbon Nanotubes in Composites

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (39)

Show source-provided references
2. Integrated optoelectronic devices based on conjugated polymers10.1126/science.280.5370.1741 ↗
3. Electron transport in a methanofullerene10.1002/adfm.200390004 ↗
4. ‘Inorganics-in-Organics’: recent developments and outlook for 4G polymer solar cells10.1039/c3nr02733c ↗
5. Photoluminescence quenching in carbon nanotube-polymer/fullerene films: carbon nanotubes as exciton dissociation centres in organic photovoltaics10.1002/adma.201101549 ↗
6. Enhancement of the field-effect mobility of poly(3-hexylthiophene)/functionalized carbon nanotube hybrid transistors10.1016/j.orgel.2007.11.007 ↗
7. Functionalized multiwall carbon nanotubes incorporated polymer/fullerene hybrid photovoltaics10.1063/1.3464970 ↗
8. The role of N-doped multiwall carbon nanotubes in achieving highly efficient polymer bulk heterojunction solar cells10.1021/nl304533j ↗
9. Carbon nanotubes and organic solar cells10.1039/C1EE02276H ↗
10. Polymer photovoltaic cells: enhanced efficiencies via a network of internal donor–acceptor heterojunctions10.1126/science.270.5243.1789 ↗
11. Two-layer organic photovoltaic cell10.1063/1.96937 ↗
12. Exciton diffusion and dissociation in a poly(p-phenylenevinylene)/C60 heterojunction photovoltaic cell10.1063/1.115797 ↗
13. Spontaneous formation of bulk heterojunction nanostructures: multiple routes to equivalent morphologies10.1021/nl200056p ↗
14. Bulk heterojunction photovoltaic active layers via bilayer interdiffusion10.1021/nl200552r ↗
15. Sequential processing: control of nanomorphology in bulk heterojunction solar cells10.1021/nl202320r ↗
16. A strong regioregularity effect in self-organizing conjugated polymer films and high-efficiency polythiophene:fullerene solar cells10.1038/nmat1574 ↗
17. High-efficiency solution processable polymer photovoltaic cells by self-organization of polymer blends10.1038/nmat1500 ↗
18. Design rules for donors in bulk-heterojunction solar cells – towards 10% energy-conversion efficiency10.1002/adma.200501717 ↗
19. Unexpected hole transfer leads to high efficiency single-walled carbon nanotube hybrid photovoltaic10.1021/nl103879b ↗
20. Hybrid carbon nanotube networks as efficient hole extraction layers for organic photovoltaics10.1021/nn304705t ↗
21. Dispersive hole transport in polymer: carbon nanotube composites10.1088/0957-4484/22/26/265711 ↗
22. Improving photovoltaic properties by incorporating both single walled carbon nanotubes and functionalized multiwalled carbon nanotubes10.1063/1.3083544 ↗
23. Water-soluble multiwall-carbon-nanotube-polythiophene composite for bilayer photovoltaics10.1063/1.2356115 ↗
24. Reappraising the need for bulk heterojunctions in polymer−fullerene photovoltaics: the role of carrier transport in all-solution-processed P3HT/PCBM bilayer solar cells10.1021/jp9050897 ↗
25. Effect of multiple adduct fullerenes on microstructure and phase behavior of P3HT: fullerene blend films for organic solar cells10.1021/nn204996w ↗
26. Toward efficient carbon nanotube/P3HT solar cells: active layer morphology, electrical, and optical properties10.1021/nl202796u ↗
27. Composition and annealing effects in polythiophene/fullerene solar cells10.1007/s10853-005-0568-0 ↗
28. Photogeneration and ultrafast dynamics of excitons and charges in P3HT/PCBM blends10.1021/jp904229q ↗
29. Role of intermolecular coupling in the photophysics of disordered organic semiconductors: aggregate emission in regioregular polythiophene10.1103/PhysRevLett.98.206406 ↗
30. Tailoring organic heterojunction interfaces in bilayer polymer photovoltaic devices10.1038/nmat3026 ↗
31. Photovoltaic principles and organic solar cells10.2533/chimia.2007.770 ↗
32. Increasing the efficiency of charge extraction limited poly-(3-hexylthiophene): [6,6] phenyl C61 butyric acid methyl ester solar cells using single walled carbon nanotubes with metallic characteristics10.1063/1.3598081 ↗
33. C.J. Brabec, V. Dyakonov, J. Parisi, N.S. Sariciftci, Organic Photovoltaics – Concepts and Realization, Springer, 2003, pp. 169–177.10.1007/978-3-662-05187-0 ↗
34. Double extraction of uniformly generated electron-hole pairs from insulators with noninjecting contacts10.1063/1.1660633 ↗
35. Trap-limited hole mobility in semiconducting poly(3-hexylthiophene)10.1103/PhysRevB.70.235207 ↗
36. Bulk limited conduction in electroluminescent polymer devices10.1063/1.369001 ↗
37. Dc and transient photoconductivity of poly(2-phenyl-1,4-phenylenevinylene)10.1103/PhysRevB.44.8643 ↗
38. Hopping in exponential band tails10.1103/PhysRevLett.54.146 ↗
39. Space-charge-limited currents in organic crystals10.1063/1.1728487 ↗