journal article·2015-10

Improved power conversion efficiency of bulk-heterojunction organic photovoltaic cells using neat C70 as an effective acceptor for an amorphous π-conjugated polymer

Takeshi Yasuda, Junpei Kuwabara, Liyuan Han, Takaki Kanbara

Publisher page

Abstract

Abstract Low-cost neat C 70 was successfully utilized to fabricate solution-processable bulk heterojunction (BHJ) organic photovoltaics (OPVs) by combining the neat C 70 with an amorphous polymer, PEDOTNDIF, which was also synthesized at low cost by using a two-step direct arylation reaction. The optimized BHJ OPV using PEDOTNDIF:C 70 exhibited a short-circuit current density ( J sc ) of 8.70 mA cm −2 , an open-circuit voltage of 0.75 V, a fill factor of 0.36, and a power conversion efficiency (PCE) of 2.33%, as compared to 1.46 mA cm −2 , 0.80 V, 0.26, and 0.30%, respectively, for the BHJ OPV fabricated using PEDOTNDIF:PC 70 BM. The much-improved PCE ( J sc ) is mainly due to the strong acceptor nature of neat C 70 , which needs to efficiently separate photo-excitons into free carriers. A good miscibility in the PEDOTNDIF:C 70 -based BHJ film with a large donor/acceptor interfacial area was also confirmed by characterizing atomic force microscopy images of the BHJ films and comparing PCEs of planar-heterojunction OPVs with PEDOTNDIF/C 70 bilayers.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Organic Electronics and Photovoltaics · Conducting polymers and applications · Perovskite Materials and Applications

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (46)

Show source-provided references
1. The future of organic photovoltaics10.1039/C4CS00227J ↗
2. High-performance multiple-donor bulk heterojunction solar cells10.1038/nphoton.2015.9 ↗
3. Recent progress of high performance polymer OLED, OPV materials for organic printed electronics10.1088/1468-6996/15/3/034203 ↗
4. Stabilizing polymer-based bulk heterojunction solar cells via crosslinking10.1002/pi.4712 ↗
5. Photoprecursor approach as an effective means for preparing multilayer organic semiconducting thin films by solution processes10.1038/srep07151 ↗
6. Optimization and simplification of polymer-fullerene solar cells through polymer and active layer design10.1016/j.polymer.2013.07.053 ↗
7. On the morphology of polymer-based photovoltaics10.1002/polb.23063 ↗
8. Single junction inverted polymer solar cell reaching power conversion efficiency 10.31% by employing dual-doped zinc oxide nano-film as cathode interlayer10.1038/srep06813 ↗
9. Aggregation and morphology control enables multiple cases of high-efficiency polymer solar cells10.1038/ncomms6293 ↗
10. Single-junction polymer solar cells exceeding 10% power conversion efficiency10.1002/adma.201404535 ↗
11. Towards industrialization of polymer solar cells: material processing for upscaling10.1039/C4TA03780D ↗
12. Effect of synthetic accessibility on the commercial viability of organic photovoltaics10.1039/c3ee24138f ↗
13. Optimization of direct arylation polymerization (DArP) through the identification and control of defects in polymer structure10.1002/pola.27279 ↗
14. Development of synthetic method for π-conjugated polymers via direct arylation polycondensation10.5059/yukigoseikyokaishi.72.1271 ↗
15. Direct (hetero) arylation: a new tool for polymer chemists10.1021/ar3003305 ↗
16. C-H arylation reaction: atom efficient and greener syntheses of π-conjugated small molecules and macromolecules for organic electronic materials10.1021/ma401190r ↗
17. Direct arylation polycondensation as simplified alternative for the synthesis of conjugated (co)polymers10.1016/j.progpolymsci.2013.04.006 ↗
18. Synthesis of 5-alkyl[3,4-c]thienopyrrole-4,6-dione-based polymers by direct heteroarylation10.1002/anie.201106411 ↗
19. Palladium-catalyzed dehydrohalogenative polycondensation of 2-bromo-3-hexylthiophene: an efficient approach to head-to-tail poly(3-hexylthiophene)10.1021/ja105767z ↗
20. Direct arylation polycondensation: a promising method for the synthesis of highly pure, high-molecular-weight conjugated polymers needed for improving the performance of organic photovoltaics10.1002/adfm.201302851 ↗
21. Neat C60:C70 buckminsterfullerene mixtures enhance polymer solar cell performance10.1039/C4TA02515F ↗
22. Highly efficient organic solar cells using a solution-processed active layer with a small molecule donor and pristine fullerene10.1039/C3TA15138G ↗
23. Preparation of bulk heterojunction composite consisting of poly(3-hexylthiophene) and neat C70 using halogen-free solvent10.1143/JJAP.51.030205 ↗
24. The role of morphology control in determining the performance of P3HT/C70 bulk heterojunction polymer solar cells10.1109/JSTQE.2010.2042034 ↗
25. Creating a uniform distribution of fullerene C60 nanorods in a polymer matrix and its photovoltaic applications10.1002/smll.200701206 ↗
26. Nanoscale phase-aggregation-induced performance improvement of polymer solar cells10.1002/smll.200600571 ↗
27. Neat C70-based bulk-heterojunction polymer solar cells with excellent acceptor dispersion10.1021/am506394m ↗
28. Effect of conjugated polyelectrolyte interlayer at cathode in bulk heterojunction photocells based on neat C70 and low-energy-gap polymer prepared with halogen-free solvent10.7567/APEX.7.051601 ↗
29. Bulk heterojunction photocells utilizing neat C70 and low energy-gap polymer prepared with halogen-free solvent10.1016/j.solmat.2013.06.004 ↗
30. Two-step direct arylation for synthesis of naphthalenediimide-based conjugated polymer10.1002/pola.27140 ↗
31. Bulk heterojunction photovoltaic cells with low donor concentration10.1002/adma.201102173 ↗
32. Electronic structure of fullerene derivatives in organic photovoltaics10.1016/j.orgel.2014.08.013 ↗
33. Organic field-effect transistors with gate dielectric films of poly-p-xylylene derivatives prepared by chemical vapor deposition10.1143/JJAP.42.6614 ↗
34. Comparative study of the n-type doping efficiency in solution-processed fullerenes and fullerene derivatives10.1002/adfm.201401842 ↗
35. Evaluation of structure-property relationships of solution-processible fullerene acceptors and their n-channel field-effect transistor performance10.1039/c2jm32693k ↗
36. C60 thin film transistors10.1063/1.115503 ↗
37. Fullerene C70 as a p-type donor in organic photovoltaic cells10.1063/1.4894637 ↗
38. Fullerene derivative acceptors for high performance polymer solar cells10.1039/C0CP01178A ↗
39. Reducing exciton binding energy by increasing thin film permittivity: an effective approach to enhance exciton separation efficiency in organic solar cells10.1021/am402744k ↗
40. Low-LUMO 56π-electron fullerene acceptors bearing electron-withdrawing cyano groups for small-molecule organic solar cells10.1016/j.orgel.2013.09.012 ↗
41. Design rules for donors in bulk-heterojunction solar cells—towards 10 % energy-conversion efficiency10.1002/adma.200501717 ↗
42. Use of benzothiadiazole–triphenylamine amorphous polymer for reproducible performance of polymer-fullerene bulk-heterojunction solar cells10.1016/j.orgel.2012.05.037 ↗
43. Synthesis and photovoltaic properties of amorphous polymers based on dithienylbenzothiadiazole–triphenylamine with hexyl side chains on different positions of thienyl groups10.1002/pola.26667 ↗
44. Compositional and electric field dependence of the dissociation of charge transfer excitons in alternating polyfluorene copolymer/fullerene blends10.1021/ja8012598 ↗
45. A polybenzo[1,2-b:4,5-b′]dithiophene derivative with deep HOMO level and its application in high-performance polymer solar cells10.1002/anie.200906934 ↗
46. Increasing the open circuit voltage of bulk-heterojunction solar cells by raising the LUMO level of the acceptor10.1021/ol062666p ↗