journal article·2020-07

A thiophene-fused benzotriazole unit as a “π-bridge” in A-π-D-π-A type acceptor to achieve more balanced JSC and VOC for OSCs

Jiacheng Wang, Han Xu, Yiqun Xiao, Tengfei Li, Jiayu Wang, Kuan Liu, Xinhui Lu, Xiaowei Zhan, Xingguo Chen

Publisher page

Abstract

Abstract As known, to balance the open-circuit voltage (VOC) and short-circuit current density (JSC) is one of the effective strategies to improve the photovoltaic performances of OSCs. In this work, a thiophene-fused benzotriazole (BTAZT) unit acts as a “π-bridge” to build an acceptor (A3) with A-π-D-π-A structure for OSCs. Compared with a thiophene-fused benzothiadiazole (BTT) unit as a “π-bridge” in our previous acceptor (A2), BTAZT unit exhibits relatively weak electron-withdrawing ability that results in a significant uplift of LUMO energy level to favor for enhancement of VOC. Also, the fusion of a thiophene ring onto BTAZ unit strengthens the intramolecular charge transfer to maintain the relatively high JSC. Therefore, the PTB7-Th:A3 OSC device shows higher PCE of 11.0% with more balanced device parameters (VOC = 0.959 V, JSC = 17.30 mA cm−2, FF = 66.2%) as well as smaller energy loss (Eloss) of 0.63 eV than the PTB7-Th:A2 device with PCE of 8.20% (VOC = 0.701 V, JSC = 19.47 mA cm−2, FF = 60.1% and Eloss = 0.67 eV). This work indicates that the rational structural modification of a “π-bridge” for A-π-D-π-A type acceptor is an effective approach to achieve the balanced VOC and JSC for the OSCs.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Organic Electronics and Photovoltaics · Conducting polymers and applications · Perovskite Materials and Applications

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (69)

Show source-provided references
1. Polymer solar cells10.1038/nphoton.2012.11 ↗
2. Solution-processable polymeric solar cells: a review on materials, strategies and cell architectures to overcome 10%10.1016/j.orgel.2015.01.014 ↗
3. Oligomer molecules for efficient organic photovoltaics10.1021/acs.accounts.5b00363 ↗
4. An electron acceptor challenging fullerenes for efficient polymer solar cells10.1002/adma.201404317 ↗
5. Fused nonacyclic electron acceptors for efficient polymer solar cells10.1021/jacs.6b12755 ↗
6. Molecular design of photovoltaic materials for polymer solar cells: toward suitable electronic energy levels and broad absorption10.1021/ar2002446 ↗
7. Development of novel conjugated donor polymers for high-efficiency bulk-heterojunction photovoltaic devices10.1021/ar900061z ↗
8. Fluorination-enabled optimal morphology leads to over 11% efficiency for inverted small-molecule organic solar cells10.1038/ncomms13740 ↗
9. Non-fullerene acceptors for organic solar cells10.1038/natrevmats.2018.3 ↗
10. Next-generation organic photovoltaics based on non-fullerene acceptors10.1038/s41566-018-0104-9 ↗
11. Polymer photovoltaic cells: enhanced efficiencies via a network of internal donor-acceptor heterojunctions10.1126/science.270.5243.1789 ↗
12. Efficient photodiodes from interpenetrating polymer networks10.1038/376498a0 ↗
13. Aggregation and morphology control enables multiple cases of high-efficiency polymer solar cells10.1038/ncomms6293 ↗
14. Efficient organic solar cells processed from hydrocarbon solvents10.1038/nenergy.2015.27 ↗
15. Efficient inverted polymer solar cells employing favourable molecular orientation10.1038/nphoton.2015.84 ↗
16. 10.8% efficiency polymer solar cells based on PTB7‐Th and PC71BM via binary solvent additives treatment10.1002/adfm.201602181 ↗
17. Realizing over 10% efficiency in polymer solar cell by device optimization10.1007/s11426-014-5273-x ↗
18. Fluorination-enabled optimal morphology leads to over 11% efficiency for inverted small-molecule organic solar cells10.1038/ncomms13740 ↗
19. Endohedral fullerenes for organic photovoltaic devices10.1038/nmat2379 ↗
20. Fast charge separation in a non-fullerene organic solar cell with a small driving force10.1038/nenergy.2016.89 ↗
21. A high-mobility electron-transport polymer with broad absorption and its use in field-effect transistors and all-polymer solar cells10.1021/ja071760d ↗
22. Spiro-fused perylene diimide arrays10.1021/jacs.7b09140 ↗
23. Wang · Trends Chem · 2019 · 1 · 86910.1016/j.trechm.2019.05.002 ↗
24. High-performance ternary organic solar cell enabled by a thick active layer containing a liquid crystalline small molecule donor10.1021/jacs.6b11991 ↗
25. Fine‐tuning of molecular packing and energy level through methyl substitution enabling excellent small molecule acceptors for nonfullerene polymer solar cells with efficiency up to 12.54%10.1002/adma.201706124 ↗
26. Design of a highly crystalline low-band gap fused-ring electron acceptor for high-efficiency solar cells with low energy loss10.1021/acs.chemmater.7b02853 ↗
27. High efficiency nonfullerene polymer solar cells with thick active layer and large area10.1002/adma.201702291 ↗
28. Spiro linkage as an alternative strategy for promising nonfullerene acceptors in organic solar cells10.1002/adfm.201502413 ↗
29. 8.0% Efficient all‐polymer solar cells with high photovoltage of 1.1 V and internal quantum efficiency near unity10.1002/aenm.201700908 ↗
30. Enhancing performance of nonfullerene acceptors via sde‐chain conjugation strategy10.1002/adma.201702125 ↗
31. Fused tris(thienothiophene)‐based electron acceptor with strong near‐infrared absorption for high‐performance as‐cast solar cells10.1002/adma.201705969 ↗
32. 11.4% Efficiency non-fullerene polymer solar cells with trialkylsilyl substituted 2D-conjugated polymer as donor10.1038/ncomms13651 ↗
33. A star‐shaped perylene diimide electron acceptor for high‐performance organic solar cells10.1002/adma.201400525 ↗
34. Three-bladed rylene propellers with three-dimensional network assembly for organic electronics10.1021/jacs.6b04368 ↗
35. Pronounced effects of a triazine core on photovoltaic performance–efficient organic solar cells enabled by a PDI trimer-based small molecular acceptor10.1002/adma.201605115 ↗
36. Naphthodithiophene‐based nonfullerene acceptor for high‐performance organic photovoltaics: effect of extended conjugation10.1002/adma.201704713 ↗
37. Fused hexacyclic nonfullerene acceptor with strong near‐infrared absorption for semitransparent organic solar cells with 9.77% efficiency10.1002/adma.201701308 ↗
38. A facile planar fused-ring electron acceptor for as-cast polymer solar cells with 8.71% efficiency10.1021/jacs.6b00853 ↗
39. High-performance electron acceptor with thienyl side chains for organic photovoltaics10.1021/jacs.6b02004 ↗
40. Organic and solution-processed tandem solar cells with 17.3% efficiency10.1126/science.aat2612 ↗
41. High exciton diffusion coefficients in fused ring electron acceptor films10.1021/jacs.8b12982 ↗
42. Enhancing the performance of polymer solar cells via core engineering of NIR‐absorbing electron acceptors10.1002/adma.201706571 ↗
43. Thermostable single-junction organic solar cells with a power conversion efficiency of 14.62%10.1016/j.scib.2018.02.015 ↗
44. A chlorinated low-bandgap small-molecule acceptor for organic solar cells with 14.1% efficiency and low energy loss10.1007/s11426-018-9334-9 ↗
45. Nonfullerene acceptor for organic solar cells with chlorination on dithieno[3,2-b:2′,3′-d]pyrrol fused-ring10.1021/acsenergylett.9b00147 ↗
46. Use of two structurally similar small molecular acceptors enabling ternary organic solar cells with high efficiencies and fill factors10.1039/C8EE01700J ↗
47. Effect of isomerization on high-performance nonfullerene electron acceptors10.1021/jacs.8b04027 ↗
48. A simple phenyl group introduced at the tail of alkyl side chains of small molecular acceptors: new strategy to balance the crystallinity of acceptors and miscibility of bulk heterojunction enabling highly efficient organic solar cells10.1002/adma.201807832 ↗
49. Over 14% efficiency in polymer solar cells enabled by a chlorinated polymer donor10.1002/adma.201800868 ↗
50. Single-junction organic solar cell with over 15% efficiency using fused-ring acceptor with electron-deficient Core10.1016/j.joule.2019.01.004 ↗
51. Achieving over 16% efficiency for single-junction organic solar cells10.1007/s11426-019-9457-5 ↗
52. A Thieno[3,4-b]thiophene-based non-fullerene electron acceptor for high-performance bulk-heterojunction organic solar cells10.1021/jacs.6b08523 ↗
53. Design, synthesis, and photovoltaic characterization of a small molecular acceptor with an ultra‐narrow band gap10.1002/anie.201610944 ↗
54. Simultaneous enhancement of three parameters of P3HT‐based organic solar cells with one oxygen atom10.1002/aenm.201803012 ↗
55. A nonfullerene semitransparent tandem organic solar cell with 10.5% power conversion efficiency10.1002/aenm.201800529 ↗
56. End-chain effects of non-fullerene acceptors on polymer solar cells10.1016/j.orgel.2018.10.005 ↗
57. A planar electron acceptor for efficient polymer solar cells10.1039/C5EE02477C ↗
58. Non‐fullerene acceptors with A2 = A1‐D‐A1 = A2 skeleton containing benzothiadiazole and thiazolidine‐2,4‐Dione for high‐performance P3HT‐based organic solar cells10.1002/solr.201700166 ↗
59. High-efficiency and air-stable P3HT-based polymer solar cells with a new non-fullerene acceptor10.1038/ncomms11585 ↗
60. Highly efficient and reproducible nonfullerene solar cells from hydrocarbon solvents10.1021/acsenergylett.7b00390 ↗
61. Achievement of high Voc of 1.02 V for P3HT‐based organic solar cell using a benzotriazole‐containing non‐fullerene acceptor10.1002/aenm.201602269 ↗
62. The introduction of fluorine and sulfur atoms into benzotriazole‐based p‐type polymers to match with a benzotriazole‐containing n‐type small molecule: “the same‐acceptor‐strategy” to realize high open‐circuit voltage10.1002/aenm.201801582 ↗
63. Narrow bandgap non-fullerene acceptor based on a thiophene-fused benzothiadiazole unit with a high short-circuit current density of over 20 mA cm−210.1039/C8TA00704G ↗
64. Enhancing the JSC of P3HT-based OSCs via a thiophene-fused aromatic heterocycle as a “π-Bridge” for A−π–D−π–A-type acceptors10.1021/acsami.9b08007 ↗
65. Optical gaps of organic solar cells as a reference for comparing voltage losses10.1002/aenm.201801352 ↗
66. Device physics of polymer:fullerene bulk heterojunction solar cells10.1002/adma.200601093 ↗
67. Effect of temperature and illumination on the electrical characteristics of polymer–fullerene bulk‐heterojunction solar cells10.1002/adfm.200304399 ↗
68. How to make ohmic contacts to organic semiconductors10.1002/cphc.200300942 ↗
69. Hidden structure ordering along backbone of fused‐ring electron acceptors enhanced by ternary bulk heterojunction10.1002/adma.201802888 ↗