Quasi-2D organic cation-doped formamidinium lead bromide (FAPbBr3) perovskite light-emitting diodes by long alkyl chain
Source abstract
Abstract
Abstract Organic-inorganic hybrid perovskites (OIHP) are promising materials for high efficiency light emitting diode (LEDs) due to their high color purity, their high photo-luminescence quantum yield and their bandgap tuneability. Introducing long chain ammonium halide in a perovskite films can result in energy funneling from a distribution of two-dimensional perovskite nanosheets to three-dimensional nanocrystals through energy cascade from high bandgap energy states (nanosheets) to lower bandgap energy states (nanocrystals), or enhance the passivation of the 3D nanocrystals. Thus, the electrical charge injection in the emitter site is enhanced or the non-radiative recombination rate is reduced. Here we report on the doping of a FAPbBr3 green-emitter with n-BABr (butyl ammonium bromide). Upon addition of a small amount of n-BABr (0.2 wt%) in a non-stoichiometric perovskite solution, the photoluminescence intensity of thin films and current efficiency of PeLEDs increase by about an order of magnitude, from 1.2 Cd/A without to 13.5 Cd/A with n-BABr doping.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Perovskite Materials and Applications · 2D Materials and Applications · Organic Light-Emitting Diodes Research
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (35)
Show source-provided references
1. Amplified spontaneous emission from organic–inorganic hybrid lead iodide perovskite single crystals under direct multiphoton excitation10.1002/adom.201600047 ↗
2. Nonlinear optical response of organic–inorganic halide perovskites10.1021/acsphotonics.5b00563 ↗
3. Challenges for commercializing perovskite solar cells10.1126/science.aat8235 ↗
4. Perovskites: the emergence of a new era for low-cost, high-efficiency solar cells10.1021/jz4020162 ↗
5. Perovskite solar cells: an emerging photovoltaic technology10.1016/j.mattod.2014.07.007 ↗
6. Effects of UV-ozone irradiation on copper doped nickel acetate and its applicability to perovskite solar cells10.1039/C6NR01308B ↗
7. Improved power conversion efficiency of perovskite solar cells using highly conductive WO x doped PEDOT: PSS10.1039/C8NJ04131H ↗
8. Solution-processed perovskite light emitting diodes with efficiency exceeding 15% through additive-controlled nanostructure tailoring10.1038/s41467-018-06425-5 ↗
9. Bright light-emitting diodes based on organometal halide perovskite10.1038/nnano.2014.149 ↗
10. Ligand removal and photo-activation of CsPbBr 3 quantum dots for enhanced optoelectronic devices10.1039/C8NR01396A ↗
11. Rubidium as an alternative cation for efficient perovskite light-emitting diodes10.1021/acsami.8b01292 ↗
12. Gas-induced formation/transformation of organic–inorganic halide perovskites10.1021/acsenergylett.7b00667 ↗
13. Hybrid organic–inorganic perovskite photodetectors10.1002/smll.201702107 ↗
14. Organic–inorganic hybrid halide perovskites for memories, transistors, and artificial synapses10.1002/adma.201704002 ↗
15. Review of recent progress in chemical stability of perovskite solar cells10.1039/C4TA04994B ↗
16. High efficiency quasi 2D lead bromide perovskite solar cells using various barrier molecules10.1039/C7SE00311K ↗
17. Enhancing stability and efficiency of perovskite solar cells with crosslinkable silane-functionalized and doped fullerene10.1038/ncomms12806 ↗
18. 2D Ruddlesden–popper perovskites for optoelectronics10.1002/adma.201703487 ↗
19. Perovskite energy funnels for efficient light-emitting diodes10.1038/nnano.2016.110 ↗
20. High-efficiency perovskite–polymer bulk heterostructure light-emitting diodes10.1038/s41566-018-0283-4 ↗
21. Anion-exchange red perovskite quantum dots with ammonium iodine salts for highly efficient light-emitting devices10.1038/s41566-018-0260-y ↗
22. Self-assembled hierarchical nanostructured perovskites enable highly efficient LEDs via an energy cascade10.1039/C8EE00293B ↗
23. Designing efficient energy funneling kinetics in Ruddlesden–popper perovskites for high‐performance light‐emitting diodes10.1002/adma.201800818 ↗
24. Tailoring the energy landscape in quasi-2D halide perovskites enables efficient green-light emission10.1021/acs.nanolett.7b00976 ↗
25. Highly efficient Cs-based perovskite light-emitting diodes enabled by energy funnelling10.1039/C7CC06615E ↗
26. Efficient green light-emitting diodes based on quasi-two-dimensional composition and phase engineered perovskite with surface passivation10.1038/s41467-018-02978-7 ↗
27. Efficient and high-color-purity light-emitting diodes based on in situ grown films of CsPbX3 (X= Br, I) nanoplates with controlled thicknesses10.1021/acsnano.7b05191 ↗
28. Efficient red perovskite light‐emitting diodes based on solution‐processed multiple quantum wells10.1002/adma.201606600 ↗
29. Overcoming the electroluminescence efficiency limitations of perovskite light-emitting diodes10.1126/science.aad1818 ↗
30. Very efficient green light-emitting diodes based on polycrystalline CH (NH3) 2PbBr3 film achieved by regulating precursor concentration and employing novel anti-solvent10.1016/j.orgel.2017.12.041 ↗
31. Efficient perovskite light-emitting diodes featuring nanometre-sized crystallites10.1038/nphoton.2016.269 ↗
32. Auger recombination in bulk and quantum well InGaAs10.1063/1.103175 ↗
33. Highly tunable colloidal perovskite nanoplatelets through variable cation, metal, and halide composition10.1021/acsnano.6b03496 ↗
34. Doping and photon induced defect healing of hybrid perovskite thin films: an approach towards efficient light emitting diodes10.1002/cnma.201900010 ↗
35. High work function with reduced phase separation of PSS in metal oxide modified PEDOT: PSS interlayers for organic photovoltaics10.1039/C6RA23170E ↗