journal article·2019-11

Stable power output (PCE>19%) of planar perovskite solar cells with PbCl2 modification at the interface of SnO2/CH3NH3PbI3

Xin Qi, Ganghong Liu, Duo Wang, Ning Zhu, Yuqing Zhang, Zehao Zhang, Cuncun Wu, Xiangdong Li, Wei Luo, Yingqiang Li, Haozhe Hu, Zhijian Chen, Lixin Xiao, Shufeng Wang, Bo Qu

Publisher page

Abstract

Abstract Interfacial modification as a feasible strategy to improve the properties of perovskite solar cells (PSCs) has been widely studied in recent years. In this work, PbCl2 modification at the interface of SnO2/CH3NH3PbI3 was used for CH3NH3PbI3-based planar PSCs. The introduction of PbCl2 between SnO2 and CH3NH3PbI3 layers boosted the crystallization of perovskite film, which promoted the photovoltaic properties of corresponding PSCs. The open circuit voltage (VOC) and fill factor (FF) of the PbCl2-modified devices (1 mg/mL) were 1.11 V and 0.79, respectively, which were both higher than those of the reference devices without PbCl2 (1.04 V and 0.76). Moreover, a steady-state power output efficiency exceeding 19% was obtained for the PbCl2-modified devices (1 mg/mL), which implied that PbCl2 modification was an effective and low cost strategy for efficient PSCs.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Perovskite Materials and Applications · Quantum Dots Synthesis And Properties · Conducting polymers and applications

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (38)

Show source-provided references
1. The emergence of perovskite solar cells10.1038/nphoton.2014.134 ↗
2. Perovskite solar cells: from materials to devices10.1002/smll.201402767 ↗
3. Photovoltaic materials: present efficiencies and future challenges10.1126/science.aad4424 ↗
4. Organometal halide perovskites as visible-light sensitizers for photovoltaic cells10.1021/ja809598r ↗
5. National Center for Photovoltaics (NCPV) at the National Renewable Energy Laboratory (NREL).
6. ITIC surface modification to achieve synergistic electron transport layer enhancement for planar-type perovskite solar cells with efficiency exceeding 20%10.1039/C7TA01636K ↗
7. Effect of cesium chloride modification on the film morphology and UV-induced stability of planar perovskite solar cells10.1039/C5TA09165A ↗
8. Efficient and stable solution-processed planar perovskite solar cells via contact passivation10.1126/science.aai9081 ↗
9. A PbI2-xClx seed layer for obtaining efficient planar-heterojunction perovskite solar cells via an interdiffusion process10.1039/C7NR02674A ↗
10. Incorporation of Cl into sequentially deposited lead halide perovskite films for highly efficient mesoporous solar cells10.1039/C4NR04007D ↗
11. A vacuum flash-assisted solution process for high-efficiency large-area perovskite solar cells10.1126/science.aaf8060 ↗
12. An electron beam evaporated TiO2 layer for high efficiency planar perovskite solar cells on flexible polyethylene terephthalate substrates10.1039/C5TA07515G ↗
13. High efficiency flexible perovskite solar cells using superior low temperature TiO210.1039/C5EE02155C ↗
14. A tailored TiO2 electron selective layer for high-performance flexible perovskite solar cells via low temperature UV process10.1016/j.nanoen.2016.09.004 ↗
15. Highly efficient and bending durable perovskite solar cells: toward a wearable power source10.1039/C4EE02441A ↗
16. Flexible, low-temperature, solution processed ZnO-based perovskite solid state solar cells10.1039/c3cc46534a ↗
17. An insight into atmospheric plasma jet modified ZnO quantum dots thin film for flexible perovskite solar cell: optoelectronic transient and charge trapping studies10.1021/acs.jpcc.5b00933 ↗
18. Highly efficient low temperature solution processable planar type CH3NH3PbI3 perovskite flexible solar cells10.1039/C5TA09520D ↗
19. Low-temperature solution-processed tin oxide as an alternative electron transporting layer for efficient perovskite solar cells10.1021/jacs.5b01994 ↗
20. Low-temperature SnO2-based electron selective contact for efficient and stable perovskite solar cells10.1039/C5TA01207D ↗
21. Low-temperature solution-processed Li-doped SnO2 as an effective electron transporting layer for high-performance flexible and wearable perovskite solar cells10.1016/j.nanoen.2016.04.060 ↗
22. Universal passivation strategy to slot-die printed SnO2 for hysteresis-free efficient flexible perovskite solar module10.1038/s41467-018-07099-9 ↗
23. Water vapor treatment of low-temperature deposited SnO2 electron selective layers for efficient flexible perovskite solar cells10.1021/acsenergylett.7b00644 ↗
24. Energetically favored formation of SnO2 nanocrystals as electron transfer layer in perovskite solar cells with high efficiency exceeding 19%10.1016/j.nanoen.2017.08.041 ↗
25. Efficient, stable and flexible perovskite solar cells using two-step solution-processed SnO 2 layers as electron-transport-material10.1016/j.orgel.2018.04.010 ↗
26. High performance of low-temperature processed perovskite solar cells based on a polyelectrolyte interfacial layer of PEI10.1016/j.orgel.2018.10.028 ↗
27. Solution-Processed Cu9S5 as a hole transport layer for efficient and stable perovskite solar cells10.1021/acsami.8b08888 ↗
28. ZnO/SnO2 double electron transport layer guides improved open circuit voltage for highly efficient CH3NH3PbI3-based planar perovskite solar cells10.1021/acsaem.8b00293 ↗
29. Suppressing defects through thiadiazole derivatives that modulate CH3NH3PbI3 crystal growth for highly stable perovskite solar cells under dark conditions10.1039/C8TA00769A ↗
30. Chemical reduction of intrinsic defects in thicker heterojunction planar perovskite solar cells10.1002/adma.201606774 ↗
31. Monolithic MAPbI3 films for high-efficiency solar cells via coordination and a heat assisted process10.1039/C7TA06766F ↗
32. Defect density and dielectric constant in perovskite solar cells10.1063/1.4897329 ↗
33. Polymer-templated nucleation and crystal growth of perovskite films for solar cells with efficiency greater than 21%10.1038/nenergy.2016.142 ↗
34. Transformation from crystalline precursor to perovskite in PbCl2-derived MAPbI310.1038/s41467-018-05937-4 ↗
35. The role of chlorine in the formation process of “CH3NH3PbI3-xClx” perovskite
36. Solution deposition-conversion for planar heterojunction mixed halide perovskite solar cells10.1002/aenm.201400355 ↗
37. Vacuum-assisted thermal annealing of CH3NH3PbI3 for highly stable and efficient perovskite solar cells10.1021/nn505978r ↗
38. Effects of excess PbI2 addition to CH3NH3PbI3−xClx perovskite solar cells10.1246/cl.171214 ↗