End-chain effects of non-fullerene acceptors on polymer solar cells
Source abstract
Abstract
Abstract Four acceptor1-acceptor2-donor-acceptor2-acceptor1 (A1-A2-D-A2-A1) structural electron acceptors with different end-chains were designed and synthesized which all possessed indacenodithiophene (IDT) core, benzothiadiazole (BT) bridge as acceptor2, and rhodanine (R) end groups as acceptor1. The non-fullerene acceptor attached with ethyl group is called IDT-BT-R2 and used as control compound. And the other three of them are attached with methoxymethyl, trifluoroethyl and 1-piperidino groups generating IDT-BT-RO, IDT-BT-RF3 and IDT-BT-RN, respectively. The influence of end-chains on their optoelectronic properties were compared between four non-fullerene acceptors. Compared with IDT-BT-R2, the molecule IDT-BT-RF3 show red-shifted light absorption and lower LUMO level because of the electron withdrawing property of fluorine atoms. OSCs based on IDT-BT-RF3 display more efficient charge separation and lower degree of monomolecular recombination, allowing OSCs to show higher short-circuit current (Jsc) than the system of IDT-BT-R2. OSCs based on IDT-BT-RO also show more efficient charge separation and less monomolecular recombination. Due to the elevated LUMO level of the acceptor IDT-BT-RN, organic solar cells (OSCs) utilizing this material as acceptor display high open-circuit voltage (Voc) of 1.10 eV and low energy loss of 0.49 eV when maintaining a relatively high power conversion efficiency (PCE) of 7.09%. We demonstrated that the end-chain engineering could finely tune the light absorption properties and energy levels of novel non-fullerene acceptors and eventually improved OSCs performance can be harvested.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Organic Electronics and Photovoltaics · Conducting polymers and applications · Organic Light-Emitting Diodes Research
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (63)
Show source-provided references
1. 25th anniversary article: bulk heterojunction solar cells: understanding the mechanism of operation10.1002/adma.201304373 ↗
2. Semiconducting polymers: the third generation10.1039/b914956m ↗
3. Polymer photovoltaic cells: enhanced efficiencies via a network of internal donor-acceptor heterojunctions10.1126/science.270.5243.1789 ↗
4. Polymer-fullerene composite solar cells10.1002/anie.200702506 ↗
5. Polymer-fullerene bulk-heterojunction solar cells10.1002/adma.200903697 ↗
6. Improved charge transport and absorption coefficient in indacenodithieno[3,2-b]thiophene-based ladder-type polymer leading to highly efficient polymer solar cells10.1002/adma.201203246 ↗
7. Fullerene derivative-doped zinc oxide nanofilm as the cathode of inverted polymer solar cells with low-bandgap polymer (PTB7-Th) for high performance10.1002/adma.201301476 ↗
8. An electron acceptor challenging fullerenes for efficient polymer solar cells10.1002/adma.201404317 ↗
9. Non-fullerene-acceptor-based bulk-heterojunction organic solar cells with efficiency over 710.1021/jacs.5b06414 ↗
10. Developing conjugated polymers with high electron affinity by replacing a C-C unit with a B<--N unit10.1002/anie.201411973 ↗
11. Fast charge separation in a non-fullerene organic solar cell with a small driving force10.1038/nenergy.2016.89 ↗
12. High-performance non-fullerene polymer solar cells based on a pair of donor-acceptor materials with complementary absorption properties10.1002/adma.201502775 ↗
13. Donor polymer design enables efficient non-fullerene organic solar cells10.1038/ncomms13094 ↗
14. An all-solution processed recombination layer with mild post-treatment enabling efficient Homo-tandem non-fullerene organic solar cells10.1002/adma.201604231 ↗
15. Ternary nonfullerene polymer solar cells with 12.16% efficiency by introducing one acceptor with cascading energy level and complementary absorption10.1002/adma.201703005 ↗
16. High-efficiency and air stable fullerene-free ternary organic solar cells10.1016/j.nanoen.2017.12.050 ↗
17. Highly efficient ternary‐blend polymer solar cells enabled by a nonfullerene acceptor and two polymer donors with a broad composition tolerance10.1002/adma.201704271 ↗
18. Fine‐tuning of molecular packing and energy level through methyl substitution enabling excellent small molecule acceptors for nonfullerene polymer solar cells with efficiency up to 12.54%10.1002/adma.201706124 ↗
19. Design of a highly crystalline low-band gap fused-ring electron acceptor for high-efficiency solar cells with low energy loss10.1021/acs.chemmater.7b02853 ↗
20. A low cost and high performance polymer donor material for polymer solar cells10.1038/s41467-018-03207-x ↗
21. A twisted thieno[3,4‐b]thiophene‐based electron acceptor featuring a 14‐π‐Electron indenoindene core for high‐performance organic photovoltaics10.1002/adma.201704510 ↗
22. Balanced partnership between donor and acceptor components in nonfullerene organic solar cells with >12% efficiency10.1002/adma.201706363 ↗
23. Energy‐level modulation of small‐molecule electron acceptors to achieve over 12% efficiency in polymer solar cells10.1002/adma.201602776 ↗
24. Dithieno[3,2-b:2',3'-d]pyrrol fused nonfullerene acceptors enabling over 13% efficiency for organic solar cells10.1002/adma.201707150 ↗
25. Single-junction binary-blend nonfullerene polymer solar cells with 12.1% efficiency10.1002/adma.201700144 ↗
26. Molecular optimization enables over 13% efficiency in organic solar cells10.1021/jacs.7b02677 ↗
27. An alkylated indacenodithieno[3,2‐b]thiophene‐based nonfullerene acceptor with high crystallinity exhibiting single junction solar cell efficiencies greater than 13% with low voltage losses10.1002/adma.201705209 ↗
28. Synergistic effect of fluorination on both donor and acceptor materials for high performance non-fullerene polymer solar cells with 13.5% efficiency10.1007/s11426-017-9199-1 ↗
29. Small-molecule acceptor based on the heptacyclic benzodi(cyclopentadithiophene) unit for highly efficient nonfullerene organic solar cells10.1021/jacs.7b01170 ↗
30. Efficient nonfullerene polymer solar cells enabled by a novel wide bandgap small molecular acceptor10.1002/adma.201606054 ↗
31. A near-infrared non-fullerene electron acceptor for high performance polymer solar cells10.1039/C7EE00844A ↗
32. Fused nonacyclic electron acceptors for efficient polymer solar cells10.1021/jacs.6b12755 ↗
33. Side-chain isomerization on an n-type organic semiconductor ITIC acceptor makes 11.77% high efficiency polymer solar cells10.1021/jacs.6b09110 ↗
34. High-performance electron acceptor with thienyl side chains for organic photovoltaics10.1021/jacs.6b02004 ↗
35. A facile planar fused-ring electron acceptor for as-cast polymer solar cells with 8.71% efficiency10.1021/jacs.6b00853 ↗
36. Effect of non-fullerene acceptors' side chains on the morphology and photovoltaic performance of organic solar cells10.1021/acsami.7b09915 ↗
37. High-performance fullerene-free polymer solar cells with 6.31% efficiency10.1039/C4EE03424D ↗
38. A thieno[3,4-b]thiophene-based non-fullerene electron acceptor for high-performance bulk-heterojunction organic solar cells10.1021/jacs.6b08523 ↗
39. Design and synthesis of a low bandgap small molecule acceptor for efficient polymer solar cells10.1002/adma.201602642 ↗
40. A novel thiophene‐fused ending group enabling an excellent small molecule acceptor for high‐performance fullerene‐free polymer solar cells with 11.8% efficiency10.1002/solr.201700044 ↗
41. Fullerene-free small molecule organic solar cells with a high open circuit voltage of 1.15 V10.1039/C5CC07973J ↗
42. Energy-level modulation of small-molecule electron acceptors to achieve over 12% efficiency in polymer solar cells10.1002/adma.201602776 ↗
43. Fine tuning surface energy of poly(3-hexylthiophene) by heteroatom modification of the alkyl side chains10.1021/acsmacrolett.5b00328 ↗
44. Effects of heteroatom substitutions on the crystal structure, film formation, and optoelectronic properties of diketopyrrolopyrrole-based materials10.1002/adfm.201201599 ↗
45. Molecular engineering of conjugated polymers for solar cells: an updated report10.1002/adma.201601391 ↗
46. A planar electron acceptor for efficient polymer solar cells10.1039/C5EE02477C ↗
47. A rhodanine flanked nonfullerene acceptor for solution-processed organic photovoltaics10.1021/ja5110602 ↗
48. Thermally stable high performance non-fullerene polymer solar cells with low energy loss by using ladder-type small molecule acceptors10.1016/j.orgel.2017.02.008 ↗
49. Efficient device engineering for inverted non-fullerene organic solar cells with low energy loss10.1039/C8TC00705E ↗
50. High quantum efficiencies in polymer solar cells at energy losses below 0.6 eV10.1021/ja5131897 ↗
51. Conformational analysis of oxygen-induced higher ordered structure of A, B-alternating poly(arylene vinylene) copolymers by solid-state NMR and molecular dynamics simulations10.1021/acs.macromol.5b02245 ↗
52. Replacing alkyl with oligo(ethylene glycol) as side chains of conjugated polymers for close π–π stacking10.1021/acs.macromol.5b00702 ↗
53. Alkoxyl side chain substituted thieno[3,4-c]pyrrole-4,6-dione to enhance photovoltaic performance with low steric hindrance and high dipole moment10.1021/acs.macromol.6b00927 ↗
54. Dipole–dipole interaction driven self-assembly of merocyanine dyes: from dimers to nanoscale objects and supramolecular materials10.1021/acs.accounts.6b00042 ↗
55. Design, synthesis, and photovoltaic characterization of a small molecular acceptor with an ultra-narrow band gap10.1002/anie.201610944 ↗
56. Reduced voltage losses yield 10% efficient fullerene free organic solar cells with >1 V open circuit voltages10.1039/C6EE02598F ↗
57. Fullerene-free polymer solar cell based on a polythiophene derivative with an unprecedented energy loss of less than 0.5 eV10.1039/C6TA07672F ↗
58. Polymer acceptor based on double B<--N bridged bipyridine (BNBP) unit for high-efficiency all-polymer solar cells10.1002/adma.201601205 ↗
59. Dithienopicenocarbazole-based acceptors for efficient organic solar cells with optoelectronic response over 1000 nm and an extremely low energy loss10.1021/jacs.7b13239 ↗
60. Unprecedented low energy losses in organic solar cells with high external quantum efficiencies by employing non-fullerene electron acceptors10.1039/C7TA04703G ↗
61. The effect of end-capping groups in A-D-A type non-fullerene acceptors on device performance of organic solar cells10.1007/s11426-017-9102-1 ↗
62. Efficient nonfullerene polymer solar cells enabled by small-molecular acceptors with a decreased fused-ring core10.1002/smtd.201700373 ↗
63. Intensity dependence of current–voltage characteristics and recombination in high-efficiency solution-processed small-molecule solar cells10.1021/nn401267s ↗