journal article·2023-09

SnO2:TiO2 hybrid nanocrystals as electron transport layer for high-efficiency and stable planar perovskite solar cells

Quan Liu, Fei Fei, Yibo Xu, Leilei Gu, Xin Ding, Kaifeng Wang, Kaihuai Du, Shubo Wang, Xu Dong, Lvzhou Li, Bairu Li, Ningyi Yuan, Jianning Ding

Organic Electronics· Volume 120
Publisher page

Abstract

Titanium oxide (TiO 2) and tin oxide (SnO 2 ) are the most commonly used electron transport materials for high-efficiency n-i-p perovskite solar cells (PSCs); however, several limiting properties of TiO 2 and SnO 2 adversely affect device performance. This study describes a facile method to synthesize SnO 2:TiO 2 hybrid nanocrystals (NCs) to construct electron transport layers (ETLs) with the advantageous properties of both SnO 2 and TiO 2 for n-i-p PSCs. The optimized SnO 2:TiO 2 ETL exhibited better surface morphology, well-matched band alignment, higher direct current conductivity, and enhanced electron extraction and transport compared to pristine TiO 2 and SnO 2 ETLs. Moreover, perovskite films deposited on SnO 2:TiO 2 ETLs exhibited a higher crystallinity and lower trap-state density than those on TiO 2 or SnO 2 ETLs. Therefore, SnO 2:TiO 2-based devices showed high performance (with a power conversion efficiency of 23.19%) and stability (with more than 83% retention of the initial efficiency after 800 h of continuous illumination). This study provides a new method for developing low-cost and efficient ETLs for n-i-p PSCs and confirms that constructing SnO 2:TiO 2 hybrid ETL is an effective method to fabricate high-efficiency and stable planar perovskite solar cells.
Source: expertdata · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Perovskite Materials and Applications · Conducting polymers and applications · Quantum Dots Synthesis And Properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (42)

Show source-provided references
1. Organometal halide perovskites as visible-light sensitizers for photovoltaic cells10.1021/ja809598r ↗
2. Perovskite solar cells with atomically coherent interlayers on SnO2 electrodes10.1038/s41586-021-03964-8 ↗
3. Efficient perovskite solar cells via improved carrier management10.1038/s41586-021-03285-w ↗
4. Photoelectric properties of planar and mesoporous structured perovskite solar cells10.3390/ma15124300 ↗
5. Advances in SnO2 for efficient and stable n-i-p perovskite solar cells10.1002/adma.202110438 ↗
6. Record-efficiency flexible perovskite solar cells enabled by multifunctional organic ions interface passivation
7. A dopant-free hole-transporting material for efficient and stable perovskite solar cells10.1039/C4EE01589D ↗
8. Fullerene derivative anchored SnO2 for high-performance perovskite solar cells10.1039/C8EE02172D ↗
9. High-efficiency perovskite solar cells enabled by anatase TiO2 nanopyramid arrays with an oriented electric field10.1002/anie.201915928 ↗
10. Modulation of perovskite crystallization processes towards highly efficient and stable perovskite solar cells with MXene quantum dot-modified SnO210.1039/D1EE00056J ↗
11. High performance hybrid solar cells sensitized by organolead halide perovskites10.1039/c3ee40343b ↗
12. Recent progress in hybrid perovskite solar cells based on n-type materials10.1039/C7TA02376F ↗
13. Tin oxide electron-selective layers for efficient, stable, and scalable perovskite solar cells10.1002/adma.202005504 ↗
14. Improving the performance of perovskite solar cells via TiO2 electron transport layer prepared by direct current pulsed magnetron sputtering10.1016/j.jallcom.2022.167278 ↗
15. Passivation and energy-level change of the SnO2 electron transport layer by reactive titania for perovskite solar cells10.1016/j.jallcom.2022.167349 ↗
16. Green synthesis of eco-friendly graphene quantum dots for highly efficient perovskite solar cells10.1021/acsaem.0c01896 ↗
17. Efficient and stable perovskite solar cells using the tungsten trioxide as an interfacial passivation layer10.1016/j.matlet.2021.131518 ↗
18. Functionalization of fullerene materials toward applications in perovskite solar cells, Mater
19. Design and control of organic semiconductors and their nanostructures for polymer-fullerene-based photovoltaic devices10.1039/C3TA15387H ↗
20. Progress and challenges of SnO2 electron transport layer for perovskite solar cells: a critical review10.1002/solr.202100983 ↗
21. Study of performance and stability of hole transport layer-free perovskite solar cells with modified electron transport layer10.1007/s10854-021-06293-8 ↗
22. Synergistic effect of fluorinated passivator and hole transport dopant enables stable perovskite solar cells with an efficiency near 2410.1021/jacs.0c12802 ↗
23. Tailoring the interfacial chemical interaction for high-efficiency perovskite solar cells10.1021/acs.nanolett.6b04015 ↗
24. Insights into fullerene passivation of SnO2 electron transport layers in perovskite solar cells10.1002/adfm.201905883 ↗
25. SnO2/ZnO heterostructure as an electron transport layer for perovskite solar cells10.1590/1980-5373-mr-2021-0050 ↗
26. Progress and challenges of SnO2 electron transport layer for perovskite solar cells: a critical review10.1002/solr.202100983 ↗
27. SnO2/TiO2 electron transporting bilayers: a route to light stable perovskite solar cells10.1021/acsaem.0c03185 ↗
28. Amorphous F-doped TiOx caulked SnO2 electron transport layer for flexible perovskite solar cells with efficiency exceeding 22.5
29. SnO2-TiO2 hybrid electron transport layer for efficient and flexible perovskite solar cells10.1021/acsenergylett.2c00637 ↗
30. Stable high-performance perovskite solar cells via passivation of the grain boundary and interface10.1021/acsaem.1c01013 ↗
31. Gradient Sn-doped heteroepitaxial film of faceted rutile TiO2 as an electron selective layer for efficient perovskite solar cells10.1021/acsami.9b04308 ↗
32. Structural investigation of SnO2 catalytic nanoparticles doped with F and Sb10.1002/sia.5384 ↗
33. Enhanced performance of TiO2-based perovskite solar cells with Ru-doped TiO2 electron transport layer[J]10.1016/j.solener.2018.05.005 ↗
34. Enhanced electron extraction using SnO2 for high-efficiency planar-structure HC (NH2) 2PbI3-based perovskite solar cells[J]10.1038/nenergy.2016.177 ↗
35. Low-temperature in situ amino functionalization of TiO2 nanoparticles sharpens electron management achieving over 21% efficient planar perovskite solar cells
36. Synergistic engineering of conduction band, conductivity, and interface of bilayered electron transport layers with scalable TiO2 and SnO2 nanoparticles for high-efficiency stable perovskite solar cells10.1021/acsami.1c02105 ↗
37. Electron transporting bilayer of SnO2 and TiO2 nanocolloid enables highly efficient planar perovskite solar cells10.1002/solr.202070014 ↗
38. Boosted charge extraction of NbOx-enveloped SnO2 nanocrystals enables 24% efficient planar perovskite solar cells10.1039/D1EE01519B ↗
39. Lowtemperature- solution-processed CuCrO2 hole-transporting layer for efficient and photostable perovskite solar cells
40. Perovskite CH3NH3PbI3(Cl) single crystals: rapid solution growth, unparalleled crystalline quality, and low trap density toward 10(8) cm(-3)10.1021/jacs.6b05683 ↗
41. Modeling space-charge-limited currents in organic semiconductors: extracting trap density and mobility10.1103/PhysRevB.84.195209 ↗
42. Cinnamate-functionalized cellulose nanocrystals as interfacial layers for efficient and stable perovskite solar cells