journal article·2018-08

Enhancing the open circuit voltage of PEDOT:PSS-PC61BM based inverted planar mixed halide perovskite solar cells from 0.93 to 1.05 V by simply oxidizing PC61BM

Yanqing Yao, Gang Wang, Liping Liao, Debei Liu, Guangdong Zhou, Cunyun Xu, Xiude Yang, Rong Wu, Qunliang Song

Publisher page

Abstract

Abstract In this paper we propose a simple method of oxidization of PC61BM, which is commonly used in perovskite solar cells as the electron transport layer, to enhance the open circuit voltage (Voc) of PEDOT:PSS-PC61BM based inverted planar mixed halide perovskite solar cells. By simply oxidizing PC61BM, the Voc was enhanced from 0.93 to 1.05 V. The power conversion efficiency thus was increased from 14.22% to 16.45%. This improvement is attributed to the lower charge carrier recombination rate and faster charge transfer at the interface after oxidation PC61BM layer, as revealed by time resolved photoluminescence, transient photovoltage and transient photocurrent measurements. Ultra-violet photoelectron spectroscopy measurements indicate about 0.12 V shift of the work function of PC61BM after oxidation, supporting the above conclusion.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Perovskite Materials and Applications · Conducting polymers and applications · Organic Electronics and Photovoltaics

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (55)

Show source-provided references
1. Organometal halide perovskites as visible-light sensitizers for photovoltaic cells10.1021/ja809598r ↗
2. https://www.nrel.gov/pv/assets/images/efficiency-chart.png.
3. A vacuum flash-assisted solution process for high-efficiency large-area perovskite solar cells10.1126/science.aaf8060 ↗
4. The rapid evolution of highly efficient perovskite solar cells10.1039/C6EE03397K ↗
5. Recent progress in organometal halide perovskite photodetectors10.1016/j.orgel.2017.10.027 ↗
6. Interfaces in perovskite solar cells10.1002/aenm.201700623 ↗
7. Dual interfacial modifications enable high performance semitransparent perovskite solar cells with large open circuit voltage and fill factor10.1002/aenm.201602333 ↗
8. Improved performance of inverted planar perovskite solar cells with F4-TCNQ doped PEDOT: PSS hole transport layers10.1039/C6TA10212C ↗
9. Correlation of energy disorder and open-circuit voltage in hybrid perovskite solar cells10.1038/nenergy.2015.1 ↗
10. High-efficiency solution-processed perovskite solar cells with millimeter-scale grains10.1126/science.aaa0472 ↗
11. CH3NH3PbI3 perovskite/fullerene planar-heterojunction hybrid solar cells10.1002/adma.201301327 ↗
12. Perovskite solar cells with a planar heterojunction structure prepared using room-temperature solution processing techniques10.1038/nphoton.2013.342 ↗
13. Nickel oxide electrode interlayer in CH3 NH3 PbI3 perovskite/PCBM planar-heterojunction hybrid solar cells10.1002/adma.201306217 ↗
14. The origin of high efficiency in low-temperature solution-processable bilayer organometal halide hybrid solar cells10.1039/C3EE43161D ↗
15. Hysteresis-less inverted CH3NH3PbI3planar perovskite hybrid solar cells with 18.1% power conversion efficiency10.1039/C5EE00120J ↗
16. Planar perovskite solar cells with 15.75% power conversion efficiency by cathode and anode interfacial modification10.1039/C5TA02265G ↗
17. Enhancement of the efficiency and stability of planar p-i-n perovskite solar cells via incorporation of an amine-modified fullerene derivative as a cathode buffer layer10.1007/s11426-016-0085-y ↗
18. Poly(3,4-ethylenedioxythiophene):poly(styrenesulfonate) (PEDOT: PSS)–molybdenum oxide composite films as hole conductors for efficient planar perovskite solar cells10.1039/C6TA03658A ↗
19. Low-temperature processed meso-superstructured to thin-film perovskite solar cells10.1039/c3ee40810h ↗
20. CH3NH3PbI3 perovskite/fullerene planar-heterojunction hybrid solar cells10.1002/adma.201301327 ↗
21. Recent progress and perspective in solution-processed Interfacial materials for efficient and stable polymer and organometal perovskite solar cells10.1039/C4EE03824J ↗
22. Organohalide perovskites for solar energy conversion10.1021/acs.accounts.5b00483 ↗
23. Nonreduction-active hole-transporting layers enhancing open-circuit voltage and efficiency of planar perovskite solar cells10.1021/acsami.6b13324 ↗
24. Efficient perovskite/fullerene planar heterojunction solar cells with enhanced charge extraction and suppressed charge recombination10.1039/C4NR06240J ↗
25. Triple cathode buffer layers composed of PCBM, C60, and LiF for high-performance planar perovskite solar cells10.1021/acsami.5b00468 ↗
26. Highly efficient inverted perovskite solar cells with sulfonated lignin doped PEDOT as hole extract layer10.1021/acsami.6b00084 ↗
27. Non-wetting surface-driven high-aspect-ratio crystalline grain growth for efficient hybrid perovskite solar cells10.1038/ncomms8747 ↗
28. V 2 O 5-PEDOT: PSS bilayer as hole transport layer for highly efficient and stable perovskite solar cells10.1016/j.orgel.2017.10.034 ↗
29. PEDOT: PSS-CrO3 composite hole-transporting layer for high-performance p-i-n structure perovskite solar cells10.1016/j.orgel.2017.11.030 ↗
30. Boosting the power conversion efficiency of perovskite solar cells using self-organized polymeric hole extraction layers with high work function10.1002/adma.201401775 ↗
31. Improving film formation and photovoltage of highly efficient inverted-type perovskite solar cells through the incorporation of new polymeric hole selective layers10.1002/aenm.201502021 ↗
32. Amino-functionalized conjugated polymer as an efficient electron transport layer for high-performance planar-heterojunction perovskite solar cells10.1002/aenm.201501534 ↗
33. Efficient perovskite hybrid solar cells by highly electrical conductive PEDOT: PSS hole transport layer10.1002/aenm.201501773 ↗
34. High-performance hybrid perovskite solar cells with open circuit voltage dependence on hole-transporting materials10.1016/j.nanoen.2015.07.024 ↗
35. Conjugated polyelectrolyte hole transport layer for inverted-type perovskite solar cells10.1038/ncomms8348 ↗
36. Inverted perovskite solar cells with inserted cross-linked electron-blocking interlayers for performance enhancement10.1039/C5TA01479D ↗
37. High-performance semitransparent perovskite solar cells with 10% power conversion efficiency and 25% average visible transmittance based on transparent CuSCN as the hole-transporting material10.1002/aenm.201500486 ↗
38. High-efficiency solution-processed planar perovskite solar cells with a polymer hole transport layer10.1002/aenm.201401855 ↗
39. Low-cost solution-processed copper iodide as an alternative to PEDOT: PSS hole transport layer for efficient and stable inverted planar heterojunction perovskite solar cells10.1039/C5TA05286F ↗
40. Origin and elimination of photocurrent hysteresis by fullerene passivation in CH3NH3PbI3 planar heterojunction solar cells10.1038/ncomms6784 ↗
41. High-performance semitransparent perovskite solar cells with solution-processed silver nanowires as top electrodes10.1039/C4NR06033D ↗
42. Inverted, environmentally stable perovskite solar cell with a novel low-cost and water-free PEDOT hole-extraction layer10.1002/aenm.201500543 ↗
43. Roles of fullerene-based interlayers in enhancing the performance of organometal perovskite thin-film solar cells10.1002/aenm.201402321 ↗
44. Matching charge extraction contact for wide-bandgap perovskite solar cells10.1002/adma.201700607 ↗
45. Large fill-factor bilayer iodine perovskite solar cells fabricated by a low-temperature solution-process10.1039/C4EE00233D ↗
46. Planar heterojunction perovskite/PC71BM solar cells with enhanced open-circuit voltage via a (2/1)-step spin-coating process10.1039/C4TA03674C ↗
47. The interface degradation of planar organic–inorganic perovskite solar cell traced by light beam induced current (LBIC)10.1039/C7RA06423C ↗
48. Efficient perovskite solar cell fabricated in ambient air using one-step spin-coating10.1039/C6RA05893K ↗
49. m-Methoxy substituents in a tetraphenylethylene-based hole-transport material for efficient perovskite solar cells10.1002/chem.201603672 ↗
50. Moisture assisted perovskite film growth for high performance solar cells10.1063/1.4901510 ↗
51. Additive enhanced crystallization of solution-processed perovskite for highly efficient planar-heterojunction solar cells10.1002/adma.201400231 ↗
52. High performance inverted structure perovskite solar cells based on a PCBM:polystyrene blend electron transport layer10.1039/C4TA05309E ↗
53. Comparative studies of substituted ruthenium(II)–pyrazoyl–pyridine complexes with classical N3 photosensitizer: the influence of NCS dye ligands on the efficiency of solid-state nanocrystalline solar cells10.1016/j.jphotochem.2004.01.002 ↗
54. Impact of MoO3 interlayer on the energy level alignment of pentacene-C60 heterostructure10.1063/1.4942480 ↗
55. Temperature dependence of open-circuit voltage and UPS study for P3HT: PCBM organic solar cells10.1109/JPHOTOV.2012.2202877 ↗