journal article·2017-02

Probing the bulk heterojunction morphology in thermally annealed active layers for polymer solar cells

N. Van den Brande, N. Patil, M. Guizar-Sicairos, R. Claessens, G. Van Assche, D.W. Breiby, B. Van Mele

Publisher page

Abstract

Abstract A combination of fast scanning chip calorimetry and X-ray ptychography is explored to study the effects of thermal annealing on the active layer of bulk heterojunction organic photovoltaics. The well-known P3HT/PC 61 BM 1:1 system is investigated as a test case. By using a custom chip calorimetry setup, it is possible to give a thermal treatment at 127 °C (400 K) to P3HT/PC 61 BM 1:1 thin layers, using a heating and cooling rate of 30000 K s −1 , after which the resulting morphology is investigated with X-ray ptychography. Applying only heating and cooling, without isothermal annealing, yields a featureless morphology. This corresponds well with thermal data which indicate a mixed amorphous phase only. For increasing isothermal annealing times, a well-defined morphology appears with increasing domain size, corresponding to the formation of an endothermal melting trajectory. This melting trajectory is expected to consist of both eutectic melting and melting of coarsened crystals. In contrast to chip calorimetry results, large domain sizes are obtained for heating and cooling without isothermal annealing at a conventional rate of 20 K min −1 . This initial morphology then develops further with increased isothermal annealing. The combination of chip calorimetry and ptychography allows separating the effects of each single thermal step on morphology development.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Organic Electronics and Photovoltaics · Thin-Film Transistor Technologies · Silicon and Solar Cell Technologies

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (77)

Show source-provided references
1. Solution-processable polymeric solar cells: a review on materials, strategies and cell architectures to overcome 10%
2. Recent advances in bulk heterojunction polymer solar cells10.1021/acs.chemrev.5b00098 ↗
3. Polymer-fullerene composite solar cells10.1002/anie.200702506 ↗
4. Bulk heterojunction solar cells: morphology and performance relationships10.1021/cr400353v ↗
5. Controlling the morphology and performance of bulk heterojunctions in solar cells. Lessons learned from the benchmark poly(3-hexylthiophene):[6,6]-phenyl-C 61 -butyric acid methyl ester system10.1021/cr300005u ↗
6. Low-bandgap near-IR conjugated polymers/molecules for organic electronics10.1021/acs.chemrev.5b00165 ↗
7. Development of novel conjugated donor polymers for high-efficiency bulk-heterojunction photovoltaic devices10.1021/ar900061z ↗
8. Aggregation and morphology control enables multiple cases of high-efficiency polymer solar cells10.1038/ncomms6293 ↗
9. Single-junction polymer solar cells exceeding 10% power conversion efficiency10.1002/adma.201404535 ↗
10. Thermally S∖, efficient polymer solar cells with nanoscale control of the interpenetrating network morphology10.1002/adfm.200500211 ↗
11. Film morphology of high efficiency solution-processed small-molecule solar cells10.1002/adfm.201300099 ↗
12. On the phase behaviour of organic semiconductors10.1002/pi.4214 ↗
13. Correlation of phase behavior and charge transport in conjugated polymer/fullerene blends10.1021/jp8061493 ↗
14. Binary organic photovoltaic blends: a simple rationale for optimum compositions10.1002/adma.200800963 ↗
15. Optimization of the bulk heterojunction composition for enhanced photovoltaic properties: correlation between the molecular weight of the semiconducting polymer and device performance10.1021/jp207669j ↗
16. Determination of phase diagrams of binary and ternary organic semiconductor blends for organic photovoltaic devices10.1016/j.solmat.2011.08.005 ↗
17. Effect of multiple adduct fullerenes on microstructure and phase behavior of P3HT:fullerene blend films for organic solar cells10.1021/nn204996w ↗
18. Phase diagram of P3HT/PCBM blends and its implication for the stability of morphology10.1021/jp804151a ↗
19. On the glass transition of polymer semiconductors and its impact on polymer solar cell stability10.1021/acs.chemmater.5b00024 ↗
20. Influence of the amorphous phase and preceding solution processing on the eutectic behaviour in the state diagram of P3HT: PC61BM determined by rapid heat–cool calorimetry10.1039/C6RA20659J ↗
21. Toward Stabilization of domains in polymer bulk heterojunction films10.1021/cm1018184 ↗
22. Role of molecular Architecture in organic photovoltaic cells10.1021/jz1000819 ↗
23. Polymer solar cells: recent development and possible routes for improvement in the performance10.1016/j.solmat.2009.10.005 ↗
24. Nanoscale morphology of high-performance polymer solar cells10.1021/nl048120i ↗
25. Real-time investigation of crystallization and phase-segregation dynamics in P3HT: PCBM solar cells during thermal annealing10.1002/adfm.201002076 ↗
26. Nano-Crystalline fullerene phases in polymer/fullerene bulk-heterojunction solar cells: a transmission electron microscopy study10.1016/j.synthmet.2005.07.217 ↗
27. Tuning the dimensions of C60-Based needlelike crystals in blended thin films10.1002/adfm.200500812 ↗
28. Effects of film treatment on the performance of poly(3-hexylthiophene)/soluble fullerene-based organic solar cells10.1016/j.tsf.2007.08.066 ↗
29. Three-dimensional bulk heterojunction morphology for achieving high internal quantum efficiency in polymer solar cells10.1002/adfm.200900183 ↗
30. The Flash DSC 1, a power compensation twin-type, chip-based fast scanning calorimeter (FSC): first findings on polymers10.1016/j.tca.2011.02.031 ↗
31. Ultra-fast isothermal calorimetry using thin film sensors10.1016/j.tca.2003.07.015 ↗
32. Non-adiabatic thin-film (chip) nanocalorimetry10.1016/j.tca.2005.01.073 ↗
33. Fast scanning power compensated differential scanning nano-calorimeter: 1. The device10.1016/j.tca.2010.03.019 ↗
34. Ultrafast thermal processing and nanocalorimetry at heating and cooling rates up to 1 MK/s10.1063/1.2751411 ↗
35. Isothermal structure development in submicron P3HT layers studied by fast scanning chip calorimetry10.1016/j.polymer.2014.12.015 ↗
36. Isothermal crystallization of PC61BM in thin layers far below the glass transition temperature10.1021/acs.cgd.5b01331 ↗
37. Thermal behaviour below and inside the glass transition region of a submicron P3HT layer studied by fast scanning chip calorimetry10.1016/j.polymer.2015.12.018 ↗
38. Phase-contrast imaging of weakly absorbing materials using hard X-rays10.1038/373595a0 ↗
39. Nanoscale X-ray imaging10.1038/nphoton.2010.267 ↗
40. Extending the methodology of X-ray crystallography to allow imaging of micrometre-sized non-crystalline specimens10.1038/22498 ↗
41. K.A. Nugent, Coherent methods in the X-ray sciences, 2010. doi:10.1080/00018730903270926.10.1080/00018730903270926 ↗
42. Coherent lensless X-ray imaging10.1038/nphoton.2010.240 ↗
43. Beyond crystallography: diffractive imaging using coherent x-ray light sources10.1126/science.aaa1394 ↗
44. Hard-X-ray lensless imaging of extended objects10.1103/PhysRevLett.98.034801 ↗
45. Phase retrieval with transverse translation diversity: a nonlinear optimization approach10.1364/OE.16.007264 ↗
46. High-resolution scanning x-ray diffraction microscopy10.1126/science.1158573 ↗
47. Ptychographic X-ray computed tomography at the nanoscale10.1038/nature09419 ↗
48. Chemical composition mapping with nanometre resolution by soft X-ray microscopy10.1038/nphoton.2014.207 ↗
49. Ptychographic coherent x-ray diffractive imaging in the water window10.1364/OE.19.001037 ↗
50. Ptychographic x-ray tomography of silk fiber hydration10.1021/ma3021163 ↗
51. In situ X-ray ptychography imaging of high-temperature CO2 acceptor particle agglomerates10.1063/1.4884598 ↗
52. Quantitative 3D X-ray imaging of densification, delamination and fracture in a micro-composite under compression10.1002/adem.201400443 ↗
53. Characterization of high-resolution diffractive X-ray optics by ptychographic coherent diffractive imaging10.1364/OE.19.021333 ↗
54. Coherent X-ray diffraction imaging of strain at the nanoscale10.1038/nmat2400 ↗
55. Strain in a silicon-on-insulator nanostructure revealed by 3D x-ray Bragg ptychography10.1038/srep09827 ↗
56. Enabling flexible polymer tandem solar cells by 3D ptychographic imaging10.1002/aenm.201400736 ↗
57. Improving organic tandem solar cells based on water-processed nanoparticles by quantitative 3D nanoimaging10.1039/C5NR02824H ↗
58. X-ray nanoscopy of a bulk heterojunction10.1371/journal.pone.0158345 ↗
59. Maximum-likelihood refinement for coherent diffractive imaging10.1088/1367-2630/14/6/063004 ↗
60. Fast scanning power compensated differential scanning nano-calorimeter: 2. Heat capacity analysis10.1016/j.tca.2010.03.020 ↗
61. van Herwaarden · 2016
62. Thermal [6,6] → [6,6] isomerization and decomposition of PCBM (Phenyl-C61-butyric acid methyl ester)10.1021/cm500594u ↗
63. Optimization of overlap uniformness for ptychography10.1364/OE.22.012634 ↗
64. PILATUS: a single photon counting pixel detector for X-ray applications10.1016/j.nima.2009.03.200 ↗
65. High-throughput ptychography using Eiger: scanning X-ray nano-imaging of extended regions10.1364/OE.22.014859 ↗
66. Dynamics of crystallization and disorder during annealing of P3HT/PCBM bulk heterojunctions10.1021/ma102817z ↗
67. Polymer crystallization of ultrathin films on solid substrates10.1016/j.ccr.2010.02.017 ↗
68. Simultaneous use of small- and wide-Angle x-ray techniques to analyze nanometerscale phase separation in polymer heterojunction solar cells10.1002/adma.200703097 ↗
69. Introduction: special issue on radiation damage10.1016/j.elspec.2009.01.004 ↗
70. High-resolution ab initio three-dimensional x-ray diffraction microscopy10.1364/JOSAA.23.001179 ↗
71. Morphology evolution via self-organization and lateral and vertical diffusion in polymer:fullerene solar cell blends10.1038/nmat2102 ↗
72. Depletion of PCBM at the cathode interface in P3HT/PCBM thin films as quantified via Neutron reflectivity measurements10.1002/adma.200903971 ↗
73. X-ray ptychographic computed tomography at 16 nm isotropic 3D resolution10.1038/srep03857 ↗
74. Diffraction-limited storage rings – a window to the science of tomorrow10.1107/S1600577514019286 ↗
75. Coherent imaging at the diffraction limit10.1107/S1600577514015343 ↗
76. Improved thermal stability of bulk heterojunctions based on side-chain functionalized poly(3-alkylthiophene) copolymers and PCBM10.1016/j.solmat.2012.12.007 ↗
77. Influence of the processing solvent on the photoactive layer nanomorphology of P3HT/PC60BM solar cells10.1002/pola.25865 ↗