Ag modified bathocuproine:ZnO nanoparticles electron buffer layer based bifacial inverted-type perovskite solar cells
Source abstract
Abstract
Abstract An Ag modified bathocuproine:ZnO nanoparticles (BCP:ZnO NPs) thin film was used as the buffer layer of inverted-type perovskite solar cells, which increased the bifacial power conversion efficiency from 6.82% to 15.50%. The surface-enhanced Raman scattering and absorbance spectra show that the Ag modified BCP small molecules can effectively passivate the surface oxygen defects of ZnO NPs and thereby increasing the crystallinity, which simultaneously increases the short-circuit current density (JSC) and fill factor. It is noted that a high incident photon-to-electron conversion efficiency (IPCE) of 92% is achieved at the wavelength of 587 nm due to the constructive interference effect in the multilayer structure, which can be used to explain the high photocurrent generation in a semi-transparent solar cell. In addition, the light intensity-dependent experimental results of the bifacial perovskite solar demonstrates that the hole transportation is better than the electron transportation in the perovskite thin film. This concept can be readily used in the optimization of high-efficiency bifacial perovskite solar cells.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Perovskite Materials and Applications · Quantum Dots Synthesis And Properties · Chalcogenide Semiconductor Thin Films
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (43)
Show source-provided references
1. 2019
2. Carbon nanodot additives realize high-performance air-stable p-i-n perovskite solar cells providing efficiencies of up to 20.2%10.1002/aenm.201802323 ↗
3. Achieving 20% efficiency for low-temperature-processed inverted perovskite solar cells10.1002/adfm.201807556 ↗
4. 20.7% highly reproducible inverted planar perovskite solar cells with enhanced fill factor and eliminated hysteresis10.1039/C9EE00872A ↗
5. Complex refractive index spectra of CH3NH3PbI3 perovskite thin films determined by spectroscopic ellipsometery and spectrophotometry10.1021/jz502471h ↗
6. Chang · J. Alloys Compd. · 2019 · 808 · 15172310.1016/j.jallcom.2019.151723 ↗
7. Organometallic halide perovskites: sharp optical absorption edge and its relation to photovoltaic performance10.1021/jz500279b ↗
8. Chang · Sol. Energy Mater. Sol. Cells · 2020 · 210 · 11047810.1016/j.solmat.2020.110478 ↗
9. Direct measurement of the exciton biding energy and effective masses for charge carriers in organic-inorganic tri-halide perovskites10.1038/nphys3357 ↗
10. Interplay between nucleation and crystal growth during the formation of CH3NH3PbI3 thin films and their application in solar cells10.1016/j.solmat.2016.10.011 ↗
11. Are mobilities in hybrid organic-inorganic halide perovskites actually “High”?10.1021/acs.jpclett.5b02390 ↗
12. Elucidating the long-range charge carrier mobility in metal halide perovskite thin films10.1039/C8EE03395A ↗
13. Direct observation of long electron-hoe diffusion distance in CH3NH3PbI3 perovskite thin film10.1038/srep14485 ↗
14. Temperature-dependent charge-carrier dynamics in CH3NH3PbI3 perovskite thin films10.1002/adfm.201502340 ↗
15. The role of rubidium in multiple-cation-based high-efficiency perovskite solar cells10.1002/adma.201701077 ↗
16. Air-processed mixed-cation Cs0.15FA0.85PbI3 planar perovskite solar cells derived from a PbI2-CsI-FAI intermediate complex10.1039/C8TA01049H ↗
17. Silver iodide formation in methyl ammonium lead iodide perovskite solar cells with silver top electrodes10.1002/admi.201500195 ↗
18. Highly efficient and stable semi-transparent perovskite solar modules with a trilayer anode electrode10.1039/C8NR06095A ↗
19. Monolithic perovskite/silicon-heterojuction tandem solar cells processed at low temperature10.1039/C5EE02965A ↗
20. Efficient bifacial semitransparent perovskite solar cells using Ag/V2O5 as transparent anodes10.1021/acsami.8b01611 ↗
21. An efficient TeO2/Ag transparent top electrode for 20%-efficiency bifacial perovskite solar cells with a bifaciality factor exceeding 80%10.1039/C9TA02389E ↗
22. Thermoelectric properties of V2O5 thin films deposited by thermal evaporation10.1016/j.apsusc.2013.06.016 ↗
23. An extensive study on the structural evolution and gamma radiation stability of TeO2 thin films10.1016/j.mssp.2017.10.018 ↗
24. Efficient and semi-transparent perovskite solar cells using a room-temperature processed MoOx/ITO/Ag/ITO electrode10.1039/C9TC03684A ↗
25. Transparent electrode for monolithic perovskite/silicon-heterojuction two-terminal tandem solar cells10.1016/j.nanoen.2017.12.043 ↗
26. Solvent engineering for high-performance inorganic-organic hybrid perovskite solar cells10.1038/nmat4014 ↗
27. Unraveling the high performance of tri-iodide perovskite absorber based photovoltaics with a non-polar solvent washing treatment10.1016/j.solmat.2015.06.002 ↗
28. Effects of anti-solvent (iodobenzene) volume on the formation of CH3NH3PbI3 thin films and their application in photovoltaic cells10.1016/j.apsusc.2018.03.123 ↗
29. BCP as additive for solution-processed PCBM electron transport layer in efficient planar heterojunction perovskite solar cells10.1109/JPHOTOV.2017.2651108 ↗
30. Applications of ZnO in organic and hybrid solar cells10.1039/c1ee01873f ↗
31. Functional graded fullerene derivatives for improving the fill factor and device stability of inverted-type perovskite solar cells10.1088/1361-6528/aac293 ↗
32. BCP as additive for solution-processed PCBM electron transport layer in efficient planar heterojunction perovskite solar cells10.1109/JPHOTOV.2017.2651108 ↗
33. The thermal decomposition of silver (I, III) oxide: a combined XRD, FT-IR and Raman spectroscopic study10.1039/b103226g ↗
34. Comparative study of ZnO thin films doped with transition metal (Cu and Co) for methylene bule photodegradation under visible irradiation10.3390/catal10050528 ↗
35. Investigation of physicochemical properties of Ag doped ZnO nanoparticles prepared by chemical route
36. Thickness effects of ZnO thin film on the performance of tri-iodide perovskite absorber based photovoltaics10.1016/j.solener.2015.07.030 ↗
37. Molecular engineering and sequential cosensitization for preventing the “trade-off” effect with photovoltaic enhancement10.1039/C6SC03938C ↗
38. Raman and photoluminescence investigation of CdS/CdSe quantum dots on TiO2 nanoparticles with multi-walled carbon nanotubes and their application in solar cells10.1016/j.vibspec.2015.08.001 ↗
39. Transparent electrode requirements for thin film solar cell modules10.1039/C0EE00373E ↗
40. Bifacial, color-tunable semitransparent perovskite solar cells for building-integrated photovoltaics10.1021/acsami.9b15488 ↗
41. Light intensity dependence of open-circuit voltage of polymer:fullerene solar cells10.1063/1.1889240 ↗
42. Origins of the s-shape characteristics in J-V curve of inverted-type perovskite solar cells10.1088/1361-6528/ab5a02 ↗
43. Atomistic origins of high-performance in hybrid halide perovskite solar cells10.1021/nl500390f ↗