The non-ideal organic electrochemical transistors impedance
Source abstract
Abstract
Organic electrochemical transistors offer powerful functionalities for biosensors and neuroinspired electronics, with still much to understand on the time dependent behavior of this electrochemical device. Here, we report on distributed element modeling of the impedance of such microfabricated device, systematically performed under a large concentration variation for KCl(aq) and CaCl2(aq). We propose a new model which takes into account three main deviations to ideality, that were systematically observed, caused by both the materials and the device complexity, over large frequency range (1 Hz to 1 MHz). More than introducing more freedom degree, the introduction of these non redundant parameters and the study of their behaviors as function of the electrolyte concentration and applied voltage give a more detailed picture of the OECT working principles. This optimized model can be further useful for improving OECT performances in many applications (e.g. biosensors, neuroinspired devices) and circuit simulations.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Conducting polymers and applications · Advanced Sensor and Energy Harvesting Materials · Advanced Memory and Neural Computing
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (38)
Show source-provided references
1. Organic electrochemical transistors10.1038/natrevmats.2017.86 ↗
2. Recent advances in materials, devices, and systems for neural interfaces10.1002/adma.201800534 ↗
3. Organic electronics for neuromorphic computing
4. Perspective: organic electronic materials and devices for neuromorphic engineering10.1063/1.5042419 ↗
5. Organic synaptic devices for neuromorphic systems10.1088/1361-6463/aacd99 ↗
6. Malliaras, in vivo recordings of brain activity using organic transistors10.1038/ncomms2573 ↗
7. Malliaras, neuromorphic functions in PEDOT:PSS organic electrochemical transistors10.1002/adma.201503674 ↗
8. Neuromorphic time‐dependent pattern classification with organic electrochemical transistor arrays10.1002/aelm.201800166 ↗
9. Cation discrimination in organic electrochemical transistors by dual frequency sensing10.1016/j.orgel.2018.03.020 ↗
10. Bernards · Adv. Funct. Mater. · 2007 · 17 · 353810.1002/adfm.200601239 ↗
11. Rivnay · Sci. Adv. · 2015 · 110.1126/sciadv.1400251 ↗
12. Ultrahigh electrical conductivity in solution-sheared polymeric transparent films10.1073/pnas.1509958112 ↗
13. A subspace, interior, and conjugate gradient method for large-scale bound-constrained minimization problems10.1137/S1064827595289108 ↗
14. Jones
15. Contact resistance effects in highly doped organic electrochemical transistors10.1002/adma.201602125 ↗
16. Structural control of mixed ionic and electronic transport in conducting polymers10.1038/ncomms11287 ↗
17. Diffusion driven selectivity in organic electrochemical transistors10.1038/srep04297 ↗
18. Analysis of a concentric coplanar capacitor for epidermal hydration sensing10.1016/j.sna.2013.08.037 ↗
19. Effect of the gate electrode on the response of organic electrochemical transistors10.1063/1.3491216 ↗
20. Neuromorphic device architectures with global connectivity through electrolyte gating10.1038/ncomms15448 ↗
21. AC impedance and state-of-charge analysis of a sealed lithium-ion rechargeable battery
22. Electrochemical impedance spectra of solid-oxide fuel cells and polymer membrane fuel cells10.1016/S0013-4686(98)00138-8 ↗
23. Impedance characterization and modeling of lithium-ion batteries considering the internal temperature gradient10.3390/en11010220 ↗
24. Review—development of diagnostic process for commercially available batteries, especially lithium ion battery, by electrochemical impedance spectroscopy10.1149/2.0141514jes ↗
25. Impedance of a porous electrode with an axial gradient of concentration10.1007/BF00610808 ↗
26. On the intrinsic electrochemical nature of the inductance in EIS: a Monte Carlo simulation of the two-consecutive-step mechanism: the flat surface 2 D case10.1016/j.electacta.2008.07.023 ↗
27. Efficient inductance calculation for planar spiral inductors and transformers based on analytical concentric half‐turn formulas10.1002/mmce.20178 ↗
28. Self-oscillation in electrochemical transistors: an RLC modeling approach10.1016/j.sse.2011.12.006 ↗
29. Electrochemical investigations on the corrosion behaviour of magnesium alloy ZE41 in a combined medium of chloride and sulphate10.1016/j.jma.2013.08.003 ↗
30. Accurate electrochemical measurement of magnesium corrosion rates; a combined impedance, mass-loss and hydrogen collection study10.1016/j.electacta.2013.12.124 ↗
31. Crljen et al., (to be published).
32. Cynthia · 2007 · 456
33. Direct measurement of ion mobility in a conducting polymer10.1002/adma.201301240 ↗
34. A simple model for ion injection and transport in conducting polymers10.1063/1.4812236 ↗
35. Realizations of generalized Warburg impedance with RC ladder networks and transmission lines10.1149/1.2100789 ↗
36. Concentric-electrode organic electrochemical transistors: case study for selective hydrazine sensing10.3390/s17030570 ↗
37. Influence of device geometry on sensor characteristics of planar organic electrochemical transistors10.1002/adma.200902329 ↗
38. Electrochemical pseudo‐inductances10.1149/1.2423477 ↗