journal article·2018-07

A building-block approach to the development of an equivalent circuit model for organic photovoltaic cells

Elisa Sesa, Ben Vaughan, Krishna Feron, Chhinder Bilen, Xiaojing Zhou, Warwick Belcher, Paul Dastoor

Publisher page

Abstract

Abstract A novel approach to equivalent circuit modelling of organic photovoltaic (OPV) cells capable of simulating both optimal and degraded devices has been developed. Freshly made OPVs (composed of an active layer with a blended poly (3-hexylthiophene) (P3HT) and indene-C60 bisadduct (ICBA) film), that exhibit a characteristic ‘J’ shaped current-voltage (I-V) curve both in the dark and under illumination, are typically fitted to a one-diode equivalent circuit model. However, as device performance deteriorates, the I-V curve undergoes a series of changes resulting in the evolution of an ‘S’ shaped I-V curve, for which there is no widely accepted equivalent circuit model. Here we present a building-block approach to develop a simple equivalent circuit model which provides an excellent fit to experimental I-V data spanning the continuum from the ideal ‘J’ to degraded ‘S’ shaped curves. Applying this new model to P3HT:ICBA devices provides insights into the physical processes that occur during degradation.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Organic Electronics and Photovoltaics · Conducting polymers and applications · Molecular Junctions and Nanostructures

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (52)

Show source-provided references
2. Organic photovoltaics: technology and market10.1016/j.solmat.2004.02.030 ↗
3. Conjugated polymer photovoltaic cells10.1021/cm049654n ↗
4. Low band gap polymers for organic photovoltaics10.1016/j.solmat.2007.01.015 ↗
5. Light harvesting for organic photovoltaics10.1021/acs.chemrev.6b00215 ↗
6. Junction diodes in organic solar cells10.1016/j.nanoen.2017.10.027 ↗
7. Intensity-dependent equivalent circuit parameters of organic solar cells based on pentacene and C6010.1063/1.1895473 ↗
8. How to model the behaviour of organic photovoltaic cells10.1002/pi.2038 ↗
9. An equivalent circuit approach to organic solar cell modelling10.1016/j.mejo.2008.01.053 ↗
10. Critical interfaces in organic solar cells and their influence on the open-circuit voltage10.1021/ar900139v ↗
11. Shockley · Bell System Technical Journal · 1949 · 28 · 43510.1002/j.1538-7305.1949.tb03645.x ↗
12. Device physics of polymer:fullerene bulk heterojunction solar cells10.1002/adma.200601093 ↗
13. Organic photovoltaics10.1039/b812502n ↗
14. Efficiency limiting factors of organic bulk heterojunction solar cells identified by electrical impedance spectroscopy10.1016/j.solmat.2006.10.020 ↗
15. Correlating reduced fill factor in polymer solar cells to contact effects10.1063/1.2841062 ↗
16. Stacked organic solar cells based on pentacene and C6010.1016/j.solmat.2006.11.002 ↗
17. Analysis of the failure mechanism for a stable organic photovoltaic during 10 000 h of testing10.1002/pip.794 ↗
18. Charge accumulation induced S-shape J–V curves in bilayer heterojunction organic solar cells10.1016/j.orgel.2011.02.016 ↗
19. Imbalanced mobilities causing S-shaped IV curves in planar heterojunction organic solar cells10.1063/1.3553764 ↗
20. Simple experimental test to distinguish extraction and injection barriers at the electrodes of (organic) solar cells with S-shaped current–voltage characteristics10.1016/j.solmat.2013.07.014 ↗
21. S-shaped current-voltage characteristics of organic solar devices10.1103/PhysRevB.82.115306 ↗
22. The effect of post-processing treatments on inflection points in current–voltage curves of roll-to-roll processed polymer photovoltaics10.1016/j.solmat.2010.06.007 ↗
23. Hole-transport limited S-shaped I-V curves in planar heterojunction organic photovoltaic cells10.1063/1.3664406 ↗
24. Dipole induced anomalous S-shape I-V curves in polymer solar cells10.1063/1.3117513 ↗
25. A dynamic Monte Carlo study of anomalous current voltage behaviour in organic solar cells10.1063/1.4903530 ↗
26. Modelling solar cell S-shaped I-V characteristics with DC lumped-parameter equivalent circuits – a review10.2298/FUEE1703327G ↗
27. An improved solar cell circuit model for organic solar cells10.1016/j.solmat.2005.05.017 ↗
28. Origin of the kink in current-density versus voltage curves and efficiency enhancement of polymer-C60 heterojunction solar cells10.1109/JSTQE.2010.2040807 ↗
29. Evolution with annealing of solar cell parameters modeling the S-shape of the current–voltage characteristic10.1016/j.solmat.2012.04.048 ↗
30. Lumped parameter modeling of organic solar cells' S-shaped I-V characteristics10.1109/JPHOTOV.2012.2219503 ↗
31. An in-depth analysis of the modelling of organic solar cells using multiple-diode circuits10.1016/j.solener.2016.06.033 ↗
32. Sesa · 2013
33. Photovoltaics in van der Waals heterostructures10.1109/JSTQE.2016.2582318 ↗
34. Analysis based on IV curve changes of organic photovoltaic mini-modules subjected to degradation under different temperature and humidity conditions
35. A Schottky-diode model of the nonlinear insulation resistance effects in SPRTs—Part 1: Theory10.1007/s10765-007-0276-x ↗
36. A Schottky-diode model of the nonlinear insulation resistance effects in HRSPRTs—Part 2 Detailed Two-and Three-Wire Measurements10.1007/s10765-007-0273-0 ↗
37. An improved circuit model for polymer solar cells10.1002/pip.2345 ↗
38. Comparison of single particle and equivalent circuit analog models for a lithium-ion cell10.1016/j.jpowsour.2011.06.007 ↗
39. Choosing the optimal fit function: comparison of the Akaike information criterion and the F-test10.1118/1.2794176 ↗
40. Recombination dynamics as a key determinant of open circuit voltage in organic bulk heterojunction solar cells: a comparison of four different donor polymers10.1002/adma.201002360 ↗
41. Origin of the dark-current ideality factor in polymer:fullerene bulk heterojunction solar cells10.1063/1.3651752 ↗
42. Temperature dependence of ideality factors in organic solar cells and the relation to radiative efficiency10.1002/aenm.201502230 ↗
43. Ideal diode equation for organic heterojunctions. I. Derivation and application10.1103/PhysRevB.82.155305 ↗
44. Impact of charge transport on current–voltage characteristics and power-conversion efficiency of organic solar cells10.1038/ncomms7951 ↗
45. Origin of the S-shape upon aging in standard organic solar cells with zinc oxide as transport layer10.1021/jp5051518 ↗
46. Chemically controlled reversible and irreversible extraction barriers via stable interface modification of zinc oxide electron collection layer in polycarbazole-based organic solar cells10.1002/adfm.201400158 ↗
47. Circuital modelling of S-shape removal in the current–voltage characteristic of TiOx inverted organic solar cells through white-light soaking10.1016/j.orgel.2014.09.033 ↗
48. Electron density profile at the interfaces of bulk heterojunction solar cells and its implication on the S-kink characteristics10.1016/j.cplett.2015.12.055 ↗
49. Validation of opposed two-diode equivalent-circuit model for S-shaped characteristic in polymer photocell by low-light characterization10.1016/j.orgel.2016.10.031 ↗
50. S-shaped I-V characteristics of organic solar cells: solving Mazhari's lumped-parameter equivalent circuit model10.1109/TED.2017.2749411 ↗
51. Light-modulated TiOx interlayer dipole and contact activation in organic solar cell cathodes10.1002/adfm.201401233 ↗
52. Spatially resolved photocurrent measurements of organic solar cells: tracking water ingress at edges and pinholes10.1016/j.solmat.2012.10.027 ↗