Effect of methyl substitution on the diketopyrrolopyrrole-based semiconducting polymers for organic thin film transistors
Source abstract
Abstract
Abstract Two semiconducting polymers, poly[2,5-bis(5-octylpentadecyl)-3,6-di(thiophen-2-yl)pyrrolo[3,4-c]pyrrole-1,4(2H,5H)-dione-selenophene] (PDPP-Se) and poly[3,6-bis(4-methylthiophen-2-yl)-2,5-bis(5-octylpentadecyl)pyrrolo[3,4-c]pyrrole-1,4(2H,5H)-dione-selenophene] (PMDPP-Se) were designed and synthesized. These polymers contain diketopyrrolopyrrole (DPP) and methyl-substituted DPP (MDPP) units as the acceptor building blocks, and selenophene as a counter donor unit. The introduction of methyl groups on the thiophene units flanked by the DPP core substantially affected its optical, electrochemical, and charge-transporting properties. Experimental results revealed that the introduction of electron-donating methyl groups raised the highest occupied molecular orbital (HOMO) and lowest unoccupied molecular orbital (LUMO) energy levels of PMDPP-Se. Interestingly, the PMDPP-Se showed better co-planarity with the adjacent aromatic groups compared to PDPP-Se. Furthermore, the methyl-substituted polymer showed a transition behavior in its thin film morphology and crystal orientation with an increase in the annealing temperature, which induced an M-shape dependence of the field-effect mobility on the annealing temperature. PMDPP-Se recorded a maximum hole mobility μh = 1.31 cm2 V−1 s−1 at optimum phase, which is higher than that of PDPP-Se (μh = 0.86 cm2 V−1 s−1).
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Organic Electronics and Photovoltaics · Conducting polymers and applications · Semiconductor materials and interfaces
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (44)
Show source-provided references
1. A high-mobility electron-transporting polymer for printed transistors,10.1038/nature07727 ↗
2. Halogenated materials as organic semiconductors10.1021/cm102182x ↗
3. Ultrahigh mobility in polymer field-effect transistors by design10.1021/ja108861q ↗
4. Ultra-high mobility transparent organic thin film transistors grown by an off-centre spin-coating method10.1038/ncomms4005 ↗
5. High-mobility pyrene-based semiconductor for organic thin-film transistors10.1021/am4005368 ↗
6. A stable solution-processed polymer semiconductor with record high-mobility for printed transistors10.1038/srep00754 ↗
7. Record high hole mobility in polymer semiconductors via side-chain engineering10.1021/ja405112s ↗
8. A thienoisoindigo-naphthalene polymer with ultrahigh mobility of 14.4 cm2/V·s that substantially exceeds benchmark values for amorphous silicon semiconductors10.1021/ja504537v ↗
9. High-mobility ambipolar transistors and high-gain inverters from a donor–acceptor copolymer semiconductor10.1002/adma.200901819 ↗
10. 25th anniversary article: key points for high-mobility organic field-effect transistors10.1002/adma.201302514 ↗
11. A timely synthetic tailoring of biaxially extended thienylenevinylene-like polymers for systematic investigation on field-effect transistors10.1002/adfm.201403527 ↗
12. Enhanced solid-state order and field-effect hole mobility through Control of nanoscale polymer aggregation10.1021/ja4088665 ↗
13. Template-guided solution-shearing method for enhanced charge Carrier mobility in diketopyrrolopyrrole-based polymer field-effect transistors10.1002/adma.201401179 ↗
14. Silaindacenodithiophene semiconducting polymers for efficient solar cells and high-mobility ambipolar transistors10.1021/cm1029744 ↗
15. Controlling conjugation and solubility of donor–acceptor semiconducting copolymers for high-performance organic field-effect transistors10.1021/acsami.5b01746 ↗
16. Bis(thienothiophenyl) diketopyrrolopyrrole-based conjugated polymers with various branched alkyl side chains and their applications in thin-film transistors and polymer solar cells10.1021/am508026s ↗
17. Boosting the ambipolar performance of solution-processable polymer semiconductors via hybrid side-chain engineering10.1021/ja403949g ↗
18. Investigation of structure–property relationships in diketopyrrolopyrrole-based polymer semiconductors via side-chain engineering10.1021/cm504545e ↗
19. Alkyl chain extension as a route to novel thieno[3,2-b]thiophene flanked diketopyrrolopyrrole polymers for use in organic solar cells and field effect transistors10.1021/ma401128s ↗
20. Record high electron mobility of 6.3 cm2V−1s−1 achieved for polymer semiconductors using a new building block10.1002/adma.201305981 ↗
21. Structural and morphological effects of alkyl side chains on flanking thiophenes of diketopyrrolopyrrole polymers for organic photovoltaic devices10.1016/j.polymer.2016.07.066 ↗
22. Methylated conjugated polymers based on diketopyrrolopyrrole and dithienothiophene for high performance field-effect transistors10.1016/j.orgel.2016.07.012 ↗
23. A high mobility DPP-based polymer obtained via direct (hetero)arylation polymerization10.1039/C4PY01222D ↗
24. Effect of fluorination on molecular orientation of conjugated polymers in high performance field-effect transistors10.1021/acs.macromol.6b01446 ↗
25. Asymmetric diketopyrrolopyrrole conjugated polymers for field-effect transistors and polymer solar cells processed from a nonchlorinated solvent10.1002/adma.201504272 ↗
26. 2,5-Bis(2-octyldodecyl)pyrrolo[3,4-c]pyrrole-1,4-(2H,5H)-dione-Based donor–acceptor alternating copolymer bearing 5,5′-Di(thiophen-2-yl)-2,2′-biselenophene exhibiting 1.5 cm2·V–1·s–1 hole mobility in thin-film transistors10.1021/ja203189h ↗
27. Selenophene-DPP donor–acceptor conjugated polymer for high performance ambipolar field effect transistor and nonvolatile memory applications10.1039/C1JM14640H ↗
28. ε-branched flexible side chain substituted diketopyrrolopyrrole-containing polymers designed for high hole and electron mobilities10.1002/adfm.201403020 ↗
29. Influence of alkyl chain branching positions on the hole mobilities of polymer thin-film transistors10.1002/adma.201202689 ↗
30. Optimal ambipolar charge transport of thienylenevinylene-based polymer semiconductors by changes in conformation for high-performance organic thin film transistors and inverters10.1021/cm303908f ↗
31. Avoid the kinks when measuring mobility10.1126/science.aaf9062 ↗
32. Mobility overestimiation due to gated contacts in organic field-effect transistors10.1038/ncomms10908 ↗
33. Microstructural characterization and charge transport in thin films of conjugated polymers10.1002/adma.200903712 ↗
34. Synthetic tailoring of solid-state order in diketopyrrolopyrrole-based copolymers via intramolecular noncovalent interactions10.1021/cm503864u ↗
35. Solution coating of large-area organic semiconductor thin films with aligned single-crystalline domains10.1038/nmat3650 ↗
36. Polyselenophenes10.1039/B908983G ↗
37. Molecular packing of high-mobility diketo pyrrolo-pyrrole polymer semiconductors with branched alkyl side chains10.1021/ja204515s ↗
38. Controlling the orientation of terraced nanoscale “ribbons” of a poly(thiophene) semiconductor10.1021/nn800574f ↗
39. Semiconducting thienothiophene copolymers: design, synthesis, morphology, and performance in thin-film organic transistors10.1002/adma.200801650 ↗
40. Enhancing 2D growth of organic semiconductor thin films with macroporous structures via a small-molecule heterointerface10.1038/ncomms5752 ↗
41. Low band gap selenophene–diketopyrrolopyrrole polymers exhibiting high and balanced ambipolar performance in bottom-gate transistors10.1039/C1SC00477H ↗
42. Alternating copolymers of dithienyl-s-tetrazine and cyclopentadithiophene for organic photovoltaic applications10.1021/cm200330c ↗
43. Enhancing field-effect mobility of conjugated polymers through rational design of branched side chains10.1002/adfm.201304231 ↗
44. Organic field-effect transistors10.1002/(SICI)1521-4095(199803)10:5<365::AID-ADMA365>3.0.CO;2-U ↗