On the influence of the photo-oxidation of P3HT on the conductivity of photoactive film of P3HT:PCBM bulk heterojunctions
Source abstract
Abstract
Abstract Previously, we reported that the photo-oxidation of P3HT:PCBM was shown to induce an increase of the electric resistance at the active layer in the solar cells, resulting in a drop in the device performances. Meanwhile, fragments resulting from the partial molecular scission of P3HT chains were also detected by analyzing the produced materials using MALDI-TOF-MS. However, the way the photo-oxidation of these active materials actually impacts on the electric resistance of the resulting device yet remains to be investigated. In this work, we perform Conductive-AFM (C-AFM) and Space Charge Limited Current (SCLC) measurements on the photo-oxidized P3HT based films; the results indicate that the conductivity of P3HT decreases upon irradiation, mainly due to a decrease of the hole mobility. Even though the number average molecular weight of the P3HT only modestly decreases during the photo-oxidation, UV–vis spectra indicate a significant decrease of the long-range ordering of the P3HT chains. These results inferred that P3HT crystal formation may partially be prevented by the oxidized molecular fragments of reduced molecular weight, resulting in the decrease of P3HT hole mobility, hence leading to the observed resistance increase in these photovoltaic active layers.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Organic Electronics and Photovoltaics · Conducting polymers and applications · Organic Light-Emitting Diodes Research
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (32)
Show source-provided references
1. Conjugated polymer-based organic solar cells10.1021/cr050149z ↗
2. Polymer solar cells10.1038/nphoton.2012.11 ↗
3. P3HT based solution-processed pseudo bi-layer organic solar cell with enhanced performance10.1016/j.orgel.2012.05.054 ↗
4. Controlling the morphology and performance of bulk heterojunctions in solar cells. Lessons learned from the benchmark Poly(3-hexylthiophene):[6,6]-Phenyl-C61-butyric Acid Methyl Ester system10.1021/cr300005u ↗
5. Efficient electron collection in hybrid polymer solar cells: in-situ-generated ZnO/Poly(3-hexylthiophene) scaffolded by a TiO2 nanorod array10.1021/jz400996d ↗
6. Ultra high open circuit voltage (>1V) of poly-3-hexylthiophene based organic solar cells with concentrated light10.1063/1.4798585 ↗
7. Towards large-scale production of solution-processed organic tandem modules based on ternary composites: design of the intermediate layer, device optimization and laser based module processing10.1016/j.solmat.2013.09.003 ↗
8. Stability of polymer solar cells10.1002/adma.201104187 ↗
9. Interlaboratory indoor ageing of roll-to-roll and spin coated organic photovoltaic devices: testing the ISOS tests10.1016/j.polymdegradstab.2014.07.013 ↗
10. Lifetime of organic photovoltaics: linking outdoor and indoor tests10.1016/j.solmat.2015.07.037 ↗
11. Photostability of organic materials used in polymer solar cells10.1002/pi.4656 ↗
12. Investigation of photodegradation in polymer solar cells blended with different fullerenes derivatives10.1016/j.solmat.2014.01.001 ↗
13. Photooxidation studies on indene-C60 adducts10.1016/j.solmat.2015.06.045 ↗
14. Induced photodegradation of quinoxaline based copolymers for photovoltaic10.1016/j.solmat.2015.08.015 ↗
15. Reversible and irreversible degradation of organic solar cell performance by oxygen10.1016/j.solener.2010.09.007 ↗
16. Evaluating carrier accumulation in degraded bulk heterojunction organic solar cells by a thermally stimulated current technique10.1002/adfm.200901573 ↗
17. Oxygen doping of P3HT: PCBM blends: influence on trap states, charge carrier mobility and solar cell performance10.1016/j.orgel.2010.07.016 ↗
18. Direct effect of partially photooxidized poly(3-hexylthiophene) on the device characteristics in BHJ solar cell10.1016/j.solmat.2013.09.042 ↗
19. The solubility of oxygen and ozone in liquids
20. Nanoscale investigation of the electrical properties in semiconductor polymer–carbon nanotube hybrid materials10.1039/c2nr11888b ↗
21. Efficient bulk heterojunction photovoltaic cells with a pre-organized poly(3-hexylthiophene) phase
22. Conductive atomic force microscopy (C-AFM) analysis of photoactive layers in inert atmosphere10.1016/j.orgel.2007.10.003 ↗
23. Space-charge limited current in regioregular poly-3-hexyl-thiophene10.1063/1.1595707 ↗
24. Development of highly conductive nanodomains in poly(3-hexylthiophene) films studied by conductive atomic force microscopy10.1016/j.polymer.2013.04.061 ↗
25. Temperature dependent characteristics of poly (3-hexylthiophene)-fullerene based heterojunction organic solar cells10.1063/1.1545162 ↗
26. Mechanisms of photodegradation of poly(3-alkylthiophenes) in solution10.1021/ma00063a047 ↗
27. Controlling the field-effect mobility of regioregular polythiophene by changing the molecular weight10.1002/adma.200305275 ↗
28. Fichou · 1999 · 18
29. Relationship between the microscopic morphology and the charge transport properties in poly(3-hexylthiophene) field-effect transistors10.1063/1.2222065 ↗
30. Influence of photo-induced degradation on the optoelectronic properties of regioregular poly(3-hexylthiophene)10.1016/j.solmat.2008.01.002 ↗
31. Determining exciton bandwidth and film microstructure in polythiophene films using linear absorption spectroscopy10.1063/1.3110904 ↗
32. Light-induced degradation of the P3HT-based solar cells active layer10.1016/j.solmat.2010.09.021 ↗