journal article·2021-02

Effect of aromatic π-bridges on molecular structures and optoelectronic properties of A-π-D-π-A small molecular acceptors based on indacenodithiophene

Yueju Chen, Jingtang Liang, Yufu Yu, Linqiao Wang, Chao Weng, Ping Shen

Publisher page

Abstract

Abstract Investigation on the relationship between molecular structure and device performance is of great important to develop highly efficient A-π-D-π-A small molecular acceptors (SMAs). However, there is still lack of a complete and in-depth study on effects of π-bridge on molecular structure, optoelectronic properties and photovoltaic performances. Herein, we reported the design, synthesis and photovoltaic application of four A-π-D-π-A type SMAs, denoted as IDT-Py-IC, IDT-Fu-IC, IDT-Th-IC, and IDT-Ph-IC, which possess an identical central D unit of indacenodithiophene and the terminal A group of 3-(dicyanomethylidene)indol-1-one, linked by various aromatic π-bridges of pyrrole, furan, thiophene, and benzene, respectively. The impact of the different aromatic π-bridge on molecular structures, optoelectronic and photovoltaic properties as well as active layer morphologies was comprehensively explored. Results show that both molecular co-planarity and electron-donating ability of aromatic π-bridges distinctly affect optical bandgaps (Egopt) and HOMO/LUMO levels of these SMAs. The poor backbone planarity of pyrrole-bridged IDT-Py-IC observed by theory calculation leads to a blue-shifted absorption and up-shifted HOMO/LUMO levels. The Egopt of these SMAs is gradually increased and HOMO levels are gradually down-shifted with the decrease of the electron-donating ability of aromatic π-bridges. Polymer solar cells (PSCs) based on these SMAs exhibit a high Voc over 0.93 V, especially for PBDB-T:IDT-Py-IC-based PSCs, producing a rather high Voc up to 1.06 V due to the high-lying LUMO level. After optimizations, the PBDB-T:IDT-Th-IC-based PSC outperforms the other three SMAs with a high PCE up to 8.72% mainly due to the large Jsc and FF, which could be ascribed to better absorption characteristics, higher and more proportional carrier mobility, efficient exciton dissociation and charge collection, reduced bimolecular recombination and superior active layer morphology. This finding demonstrates that the π-bridge plays a crucial role in tailoring molecular structures, optoelectronic properties and device performance of A-π-D-π-A type SMAs.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Organic Electronics and Photovoltaics · Conducting polymers and applications · Organic and Molecular Conductors Research

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (78)

Show source-provided references
1. Recent Advances in wide-bandgap photovoltaic polymers10.1002/adma.201605437 ↗
2. Recent advances in bulk heterojunction polymer solar cells10.1021/acs.chemrev.5b00098 ↗
3. Achieving highly efficient nonfullerene organic solar cells with improved intermolecular interaction and open-circuit voltage10.1002/adma.201700254 ↗
4. Ternary solar cells with a mixed face-on and edge-on enable an unprecedented efficiency of 12.1%10.1039/C6EE02851A ↗
5. A nonfullerene acceptor utilizing a novel asymmetric multifused-ring core unit for highly efficient organic solar cells10.1039/C8TC01229F ↗
6. High-performance eight-membered indacenodithiophene-based asymmetric A-D-A type non-fullerene acceptors10.1002/solr.201800246 ↗
7. Realizing small energy loss of 0.55 eV, high open-circuit voltage >1 V and high efficiency >10 % in fullerene-free polymer solar cells via energy driver10.1002/adma.201605216 ↗
8. Fine-tuning the energy levels of a nonfullerene small-molecule acceptor to achieve a high short-circuit current and a power conversion efficiency over 12% in organic solar cells10.1002/adma.201704904 ↗
9. Pronounced effects of a triazine core on photovoltaic performance-efficient organic solar cells enabled by a PDI trimer-based small molecular acceptor10.1002/adma.201605115 ↗
10. A medium-bandgap small molecule donor compatible with both fullerene and unfused-ring nonfullerene acceptors for efficient organic solar cells10.1039/C9TC04680A ↗
11. Single-junction organic photovoltaic cells with approaching 18% efficiency10.1002/adma.201908205 ↗
12. Organic tandem solar cells with 18.6% efficiency10.1016/j.solener.2020.01.042 ↗
13. 18% efficiency organic solar cells10.1016/j.scib.2020.01.001 ↗
14. An electron acceptor challenging fullerenes for efficient polymer solar cells10.1002/adma.201404317 ↗
15. Design and synthesis of a low bandgap small molecule acceptor for efficient polymer solar cells10.1002/adma.201602642 ↗
16. Design of a highly crystalline low-band gap fused-ring electron acceptor for high-efficiency solar cells with low energy loss10.1021/acs.chemmater.7b02853 ↗
17. Design, synthesis, and photovoltaic characterization of a small molecular acceptor with an ultra-narrow band gap10.1002/anie.201610944 ↗
18. Design of a new small-molecule electron acceptor enables efficient polymer solar cells with high fill factor10.1002/adma.201704051 ↗
19. Non-fullerene acceptors end-capped with an extended conjugation group for efficient polymer solar cells10.1016/j.orgel.2018.05.050 ↗
20. Structure evolution of oligomer fused-ring electron acceptors toward high efficiency of as-cast polymer solar cells10.1002/aenm.201600854 ↗
21. Energy-level modulation of small-molecule electron acceptors to achieve over 12% efficiency in polymer solar cells10.1002/adma.201602776 ↗
22. Halogenated conjugated molecules for ambipolar field-effect transistors and non-fullerene organic solar cells10.1039/C7QM00025A ↗
23. High efficiency near-infrared and semitransparent non-fullerene acceptor organic photovoltaic cells10.1021/jacs.7b11278 ↗
24. Small-molecule acceptor based on the heptacyclic benzodi(cyclopentadithiophene) unit for highly efficient nonfullerene organic solar cells10.1021/jacs.7b01170 ↗
25. Conjugated side-chain optimization of indacenodithiophene-based nonfullerene acceptors for efficient polymer solar cells10.1039/C9TC02237F ↗
26. A near-infrared non-fullerene electron acceptor for high performance polymer solar cells10.1039/C7EE00844A ↗
27. Reduced voltage losses yield 10% efficient fullerene free organic solar cells with >1 V open circuit voltages10.1039/C6EE02598F ↗
28. Reducing the efficiency-stability-cost gap of organic photovoltaics with highly efficient and stable small molecule acceptor ternary solar cells10.1038/nmat4797 ↗
29. High-efficiency as-cast organic solar cells based on acceptors with steric hindrance induced planar terminal group10.1002/aenm.201901280 ↗
30. Nonfullerene acceptor molecules for bulk heterojunction organic solar cells10.1021/acs.chemrev.7b00535 ↗
31. An electron acceptor based on indacenodithiophene and 1,1-dicyanomethylene-3-indanone for fullerene free organic solar cells10.1039/C4TA06004K ↗
32. Comparison of conventional and inverted structures in fullerene-free organic solar cells10.1016/j.jechem.2015.10.002 ↗
33. Exploiting noncovalently conformation locking as a design strategy for high performance fused-ring electron acceptor used in polymer solar cells10.1021/jacs.7b00566 ↗
34. Near-infrared absorbing non-fullerene acceptors with selenophene as π bridge for efficient organic solar cells10.1039/C8TA00783G ↗
35. A planar electron acceptor for efficient polymer solar cells10.1039/C5EE02477C ↗
36. Significantly enhancement of photovoltaic performances through introducing S∙∙∙N conformational locks10.1039/C7TA05774A ↗
37. Synthesis and photovoltaic properties of a series of narrow bandgap organic semiconductor acceptors with their absorption edge reaching 900 nm10.1021/acs.chemmater.7b03928 ↗
38. High-performance fullerene-free polymer solar cells with 6.31% efficiency10.1039/C4EE03424D ↗
39. A nonfullerene acceptor with alkylthio- and dimethoxy-thiophene-groups yielding high-performance ternary organic solar cells10.1002/solr.201900353 ↗
40. Efficient polymer solar cells having high open-circuit voltage and low energy loss enabled by a main-chain twisted small molecular acceptor10.1021/acsami.9b03499 ↗
41. High-performance fullerene-free polymer solar cells featuring efficient photocurrent generation from dual pathways and low nonradiative recombination loss10.1021/acsenergylett.8b01824 ↗
42. Enhancing the performance of organic solar cells by hierarchically supramolecular self-assembly of fused-ring electron acceptors10.1021/acs.chemmater.8b01319 ↗
43. Side-chain engineering of nonfullerene acceptors for near-infrared organic photodetectors and photovoltaics10.1021/acsenergylett.9b00721 ↗
44. Extended conjugation length of nonfullerene acceptors with improved planarity via noncovalent interactions for high-performance organic solar cells10.1002/aenm.201801618 ↗
45. Near-infrared electron acceptors with unfused architecture for efficient organic solar cells10.1021/acsami.0c00837 ↗
46. Nonfused nonfullerene acceptors with an A-D-A′-D-A framework and a benzothiadiazole core for high-performance organic solar cells10.1021/acsami.0c01850 ↗
47. Benzotriazole-based acceptor and donors, coupled with chlorination, achieve a high VOC of 1.24 V and an efficiency of 10.5% in fullerene-free organic solar cells10.1021/acs.chemmater.8b05316 ↗
48. Angular-shaped dithienonaphthalene-based nonfullerene acceptor for high-performance polymer solar cells with large open-circuit voltages and minimal energy losses10.1021/acs.chemmater.7b03770 ↗
49. Molecular orientation unified nonfullerene acceptor enabling 14% efficiency as-cast organic solar cells10.1002/adfm.201903269 ↗
50. Nonfullerene acceptor for organic solar cells with chlorination on dithieno[3,2-b:2′,3′-d]pyrrol fused-ring10.1021/acsenergylett.9b00147 ↗
51. Enhancing the photovoltaic performance of ladder-type dithienocyclopentacarbazole-based nonfullerene acceptors through fluorination and side-chain engineering10.1021/acs.chemmater.9b02355 ↗
52. New pyrrole-based organic dyes for dye-sensitized solar cells: convenient syntheses and high efficiency10.1002/chem.200901150 ↗
53. Effects of aromatic π-conjugated bridges on optical and photovoltaic properties of N,N-diphenylhydrazone-based metal-free organic dyes10.1016/j.orgel.2011.08.010 ↗
54. Co-sensitization of “H”-type dyes with planar squaraine dyes for efficient dye-sensitized solar cells10.1039/C6RA03694E ↗
55. Organic dyes incorporating N-functionalized pyrrole as conjugated bridge for dye-sensitized solar cells: convenient synthesis, additional withdrawing group on the p-bridge and the suppressed aggregation10.1016/j.dyepig.2013.05.030 ↗
56. Pyrrole- based organic dyes for dye-sensitized solar cells10.1021/jp801036s ↗
57. Novel pyrrole-based dyes for dye-sensitized solar cells: from rod-shape to “H’’ type10.1039/c2jm30200d ↗
58. Nonlinear optical chromophores with pyrrole moieties as the conjugated bridge: enhanced NLO effects and interesting optical behavior10.1021/jp0768322 ↗
59. Structural characteristics and optical properties of a series of solvatochromic fluorescent dyes displaying long-wavelength emission10.1016/j.dyepig.2009.04.008 ↗
60. New diketo-pyrrolo-pyrrole (DPP) sensitizer containing a furan moiety for efficient and stable dye-sensitized solar cells10.1016/j.dyepig.2011.09.009 ↗
61. Significantly improved performance of dye-sensitized solar cell by optimizing organic dyes with pyrrole as the isolation spacer and utilizing alkyl chain engineering10.1039/C8TA06258G ↗
62. Small-molecule/fullerene acceptor alloy: a powerful tool to enhance device efficiency and thermal stability of ternary polymer solar cells10.1039/D0TC00329H ↗
63. Series of quinoidal methyl-dioxocyano-pyridine based π-extended narrow-bandgap oligomers for solution-processed small-molecule organic solar cells10.1021/acs.chemmater.5b01350 ↗
64. Effect of acceptor strength on optical and electronic properties in conjugated polymers for solar applications10.1021/ja513002h ↗
65. Effects of the length and steric hindrance of π-bridge on molecular configuration and optoelectronic properties of diindole[3,2-b:4,5-b′]pyrrole-based small molecules10.1016/j.dyepig.2019.107687 ↗
66. Efficient nonfullerene organic solar cells with small driving forces for both hole and electron transfer10.1002/adma.201804215 ↗
67. 11.4% Efficiency non-fullerene polymer solar cells with trialkylsilyl substituted 2D-conjugated polymer as donor10.1038/ncomms13651 ↗
68. Energy-level modulation of non-fullerene acceptors to achieve high-efficiency polymer solar cells at a diminished energy offset10.1039/C7TA01554B ↗
69. Highly efficient fullerene-free organic solar cells operate at near zero highest occupied molecular orbital offset10.1021/jacs.8b12126 ↗
70. Sun · J. Am. Chem. Soc. · 2020 · 142 · 146510.1021/jacs.9b09939 ↗
71. Molecular and morphological influences on the open circuit voltages of organic photovoltaic devices10.1021/ja9007722 ↗
72. On the origin of the open-circuit voltage of polymer-fullerene solar cells10.1038/nmat2548 ↗
73. Quantitatively analyzing the influence of side chains on photovoltaic properties of polymer-fullerene solar cells10.1021/jp106640r ↗
74. Development of spiro[cyclopenta[1,2-b:5,4-b′]dithiophene-4,9′-fluorene]-based A-π-D-π-A small molecules with different acceptor units for efficient organic solar cells10.1021/acsami.6b14114 ↗
75. A rational comparison of the effects of halogen atoms incorporated into the polymer donors on the performance of polymer solar cells10.1016/j.orgel.2019.04.011 ↗
76. Device physics of polymer:fullerene bulk heterojunction solar cells10.1002/adma.200601093 ↗
77. Intensity dependence of current-voltage characteristics and recombination in high-efficiency solution-processed small-molecule solar cells10.1021/nn401267s ↗
78. Nonhalogenated-solvent-processed efficient polymer solar cells enabled by medium-band-gap A-π-D-π-A small-molecule acceptors based on a 6,12-dihydro-diindolo[1,2-b:10,20-e]pyrazine unit10.1021/acsami.9b17185 ↗