Exploring the ultrasonic nozzle spray-coating technique for the fabrication of solution-processed organic electronics
Source abstract
Abstract
Abstract The ultrasonic nozzle (US) spray method was investigated for its utility in fabricating organic electrodes composed of poly(3,4-ethylenedioxythiophene):poly(styrenesulfonate) (PEDOT:PSS), a standard conductive polymer material used to produce large-area low-cost OFETs. The US spray technique involves generating a solution spray by first passing the solution through a head and nozzle subjected to ultrasonic vibrations that induce atomization. This method is advantageous in that the resulting spray comprises extremely small solution droplets a few micrometers in diameter, unlike the spray produced using conventional air spray methods. The PEDOT:PSS US solution spraying process was optimized by controlling the flow rate of the N 2 carrier gas and the substrate temperature while monitoring the quality of the resulting PEDOT:PSS electrode films. The pentacene field-effect transistors prepared using the US spray method displayed a maximum field-effect mobility of 0.47 cm 2 V −1 s −1 (with an average value of 0.31 cm 2 V −1 s −1 ), 35% better than the mobilities achieved using the conventional air spray method. In addition, the device-to-device reproducibility was improved, as indicated by a decrease in the standard deviation of the mobility values from 30% for the air spray devices to 24% for the US spray devices. These results indicated that the US spray technique is efficient and superior to the conventional air spray method for the development of low-cost large-area organic electronics.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Organic Electronics and Photovoltaics · Advanced Sensor and Energy Harvesting Materials · Conducting polymers and applications
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (38)
Show source-provided references
1. Organic thin-film transistors10.1039/b909902f ↗
2. Contact-induced crystallinity for high-performance soluble acene-based transistors and circuits10.1038/nmat2122 ↗
3. Materials and applications for large area electronics: solution-based approaches10.1021/cr900150b ↗
4. Flexible electronics: the next ubiquitous platform10.1109/JPROC.2012.2190168 ↗
5. Organic thin-film transistors for chemical and biological sensing10.1002/adma.201103334 ↗
6. Bias-stress stability of low-voltage p-channel and n-channel organic thin-film transistors on flexible plastic substrates10.1016/j.orgel.2014.08.057 ↗
7. Flexible lowvoltage organic thin-film transistors and circuits based on C10-DNTT10.1039/C1JM14917B ↗
8. Controlling nucleation and crystallization in solution-processed organic semiconductors for thin-film transistors10.1002/adma.200900705 ↗
9. Solution-processable organic semiconductors for thin-film transistors: opportunities for chemical engineers10.1002/aic.11151 ↗
10. Progress and challenges in commercialization of organic electronics10.1557/mrs2008.149 ↗
11. All-printed thin-film transistors from networks of liquid-exfoliated nanosheets10.1126/science.aal4062 ↗
12. Nano-confinement induced chain alignment in ordered P3HT nanostructures defined by nanoimprint lithography10.1021/nn900831m ↗
13. Electrolyte-gated transistors for organic and printed electronics10.1002/adma.201202790 ↗
14. A Novel blade-jet coating method for achieving ultrathin, uniform film toward all-solution-processed large-area organic light-emitting diodes10.1002/admt.201600029 ↗
15. The path to ubiquitous and low-cost organic electronic appliances on plastic10.1038/nature02498 ↗
16. Roll-to-Roll fabrication of large area functional organic materials10.1002/polb.23192 ↗
17. Thin film deposition, patterning, and printing in organic thin film transistors10.1021/cm0496117 ↗
18. Spray coating methods for polymer solar cells fabrication: a review10.1016/j.mssp.2015.05.019 ↗
19. Fully spray coated organic photodiodes10.1021/nl803386y ↗
20. Fluorene bilayer for polymer organic light-emitting diode using efficient ionization method for atomized droplet10.1016/j.orgel.2015.07.008 ↗
21. Fabrication of organic thin-film transistors by spray-deposition for low-cost, large-area electronics10.1016/j.orgel.2010.09.008 ↗
22. Effect of solution aging on morphology and electrical characteristics of regioregular P3HT FETs fabricated by spin coating and spray coating10.1016/j.orgel.2011.06.027 ↗
23. Spray deposition of organic semiconducting thin-films: towards the fabrication of arbitrary shaped organic electronic devices10.1016/j.orgel.2010.02.018 ↗
24. Spray-printed organic field-effect transistors and complementary inverters10.1039/c2tc00085g ↗
25. Ultrasonic spray coating as deposition technique for the light-emitting layer in polymer LEDs10.1016/j.orgel.2015.01.015 ↗
26. High-performance flexible perovskite solar cells by using a combination of ultrasonic spray-coating and low thermal budget photonic curing10.1021/acsphotonics.5b00119 ↗
27. Two-dimensional-growth small molecular hole-transporting layer by ultrasonic spray coating for organic light-emitting devices10.1016/j.orgel.2017.05.024 ↗
28. Ultrasmooth transparent conductive hybrid films of reduced graphene oxide and single-walled carbon nanotube by ultrasonic spraying10.1016/j.synthmet.2016.10.012 ↗
29. Ultrasonic spray coating of 6.5% efficient diketopyrrolopyrrole-based organic photovoltaics10.1109/JPHOTOV.2014.2352153 ↗
30. Patterning the organic electrodes of all-organic thin film transistors with a simple spray printing technique10.1063/1.2372583 ↗
31. Polymer gate dielectric surface viscoelasticity modulates pentacene transistor performance10.1126/science.1146458 ↗
32. Effect of the phase states of self-assembled monolayers on pentacene growth and thin-film transistor characteristics10.1021/ja800142t ↗
33. Interface engineering in organic transistors10.1016/S1369-7021(07)70019-6 ↗
34. Device physics of solution-processed organic field-effect transistors10.1002/adma.200501152 ↗
35. Observation of field-effect transistor behavior at self-organized interfaces10.1002/adma.200400392 ↗
36. Behavior of pentacene molecules deposited onto roughness-controlled polymer dielectrics films and its effect on FET performance10.1016/j.synthmet.2012.12.007 ↗
37. Surface energetics and growth of pentacene10.1103/PhysRevB.66.121404 ↗
38. Pentacene thin film growth10.1021/cm049563q ↗