Accelerated degradation of Al3+ doped ZnO thin films using damp heat test
Source abstract
Abstract
Two different types of aluminum-doped zinc oxide (AZO) thin films were fabricated using low cost sol–gel technique. By applying damp heat testing, the optical and electrical properties of those films were investigated under the influence of accelerated degradation from moisture or moisture vapor. Complementary measurements of optical transmittance, work function, and conductivity allowed exploring the degradation of AZO thin films and the corresponding OPV devices. We found that optical properties like transmittance, absorption coefficient, and band gap are not influenced by temperature and moisture. However, an increase in the work function, and a decrease in the conductivity of AZO films were observed upon damp heat exposure indicating the formation of a barrier or depletion layer at the metal oxide semiconductor interface.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: ZnO doping and properties · Thin-Film Transistor Technologies · Transition Metal Oxide Nanomaterials
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (32)
Show source-provided references
1. Infrared spectra of CH3COONa and CD3COONa and assignments of vibrational frequencies10.1063/1.1739921 ↗
2. Electrical behavior of SnO2 thin films in humid atmosphere10.1016/S0925-4005(99)00016-7 ↗
3. Preparation and properties of transparent conductive aluminum-doped zinc oxide thin films by sol–gel process10.1116/1.1340659 ↗
4. Transparent conducting ZnO:Al, In and Sn thin films deposited by the sol–gel method10.1016/S0040-6090(03)00014-2 ↗
5. Dünne ITO-schichten als leitfähige, transparente Elektroden Thin films of ITO as conductive, transparent electrodes10.1002/vipr.200400214 ↗
6. Lifetimes of organic photovoltaics: combining chemical and physical characterisation techniques to study degradation mechanisms10.1016/j.solmat.2006.04.009 ↗
7. Electronic memory effects in diodes from a zinc oxide nanoparticle-polystyrene hybrid material10.1063/1.2345612 ↗
8. Inverted bulk-heterojunction organic photovoltaic device using a solution-derived ZnO underlayer10.1063/1.2359579 ↗
9. ZnO – nanostructures, defects, and devices10.1016/S1369-7021(07)70078-0 ↗
10. Transparent Al–Zn–Sn–O thin film transistors prepared at low temperature10.1063/1.2998612 ↗
11. Air-stable inverted flexible polymer solar cells using zinc oxide nanoparticles as an electron selective layer10.1063/1.2945281 ↗
12. The impact of water vapor transmission rate on the lifetime of flexible polymer solar cells10.1063/1.2975185 ↗
13. Origin of threshold voltage instability in indium–gallium–zinc oxide thin film transistors10.1063/1.2990657 ↗
14. Stability/degradation of polymer solar cells10.1016/j.solmat.2008.01.005 ↗
15. Polymer solar cells that use self-assembled-monolayer-modified ZnO/metals as cathodes10.1002/adma.200703050 ↗
16. Polymer–fullerene bulk-heterojunction solar cells10.1002/adma.200801283 ↗
17. All solution-processed high-resolution bottom-contact transparent metal-oxide thin film transistors10.1088/0022-3727/42/12/125102 ↗
18. Polymer–fullerene bulk-heterojunction solar cells10.1002/adma.200903697 ↗
19. Transient characteristics of inverted polymer solar cells using titaniumoxide interlayers10.1063/1.3455108 ↗
20. Applications of ZnO in organic and hybrid solar cells10.1039/c1ee01873f ↗
21. Comparison of various sol–gel derived metal oxide layers for inverted organic solar cells10.1016/j.solmat.2011.03.023 ↗
22. Inverted organic solar cells using a solution processed aluminum-doped zinc oxide buffer layer10.1016/j.orgel.2011.05.027 ↗
23. Inverted polymer solar cells integrated with a low-temperature-annealed sol–gel-derived ZnO Film as an electron transport layer10.1002/adma.201004301 ↗
24. Urbach tail and bandgap analysis in near stoichiometric LiNbO3 crystals10.1002/pssa.201127361 ↗
25. Metal oxides for interface engineering in polymer solar cells10.1039/c2jm33838f ↗
26. Understanding S-shaped current–voltage characteristics in organic solar cells containing a TiOx interlayer with impedance spectroscopy and equivalent circuit analysis10.1021/jp305206d ↗
27. Stability of polymer solar cells10.1002/adma.201104187 ↗
28. Transparente leitfähige Elektroden10.1002/vipr.201200495 ↗
29. Design of the solution-processed intermediate layer by engineering for inverted organic multi junction solar cells10.1002/aenm.201200659 ↗
30. Efficient tandem and triple-junction polymer solar cells10.1021/ja401434x ↗
31. Interface-engineering additives for inverted BHJ polymer solar cells10.1016/j.solmat.2012.11.014 ↗
32. A polymer tandem solar cell with 10.6% power conversion efficiency10.1038/ncomms2411 ↗