Generalized enhancement of charge injection in bottom contact/top gate polymer field-effect transistors with single-walled carbon nanotubes
Source abstract
Abstract
Abstract We investigate the influence of small amounts of dispersed single-walled carbon nanotubes (SWNTs) on the contact resistance and device characteristics of bottom contact/top gate polymer field-effect transistors (FETs). Five conjugated polymers representing different classes of polymer semiconductors with different HOMO/LUMO levels are employed, namely, polythiophenes (P3HT), polyphenylenevinylenes (MDMO-PPV), polyfluorenes (F8T2), naphthalene-bis(dicarboximide) bithiophene copolymers (P(NDI2OD-T2)), and diketopyrrolo-pyrrole-bithiophene copolymers (DPPT-TT). In all cases the presence of dispersed SWNTs reduces non-ohmic contact resistance and lowers threshold and onset voltages for charge transport. In some cases inherent ambipolar charge transport in conjugated polymers (F8T2 and P(NDI2OD-T2)) is revealed. The concentration of the SWNTs within the semiconducting layer remains below the percolation limit and thus the apparent mobilities and on/off ratios are still determined by the polymer and independent of the specific type of the carbon nanotubes (metallic or semiconducting). The degree of enhancement depends both on the energy level offset between the injecting gold electrode and the HOMO/LUMO level (i.e., Schottky barrier) and the charge carrier mobility of the respective polymer. The simplicity of this injection enhancement method and its broad applicability make it a step toward high performance polymer transistors without injection limitations.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Organic Electronics and Photovoltaics · Conducting polymers and applications · Carbon Nanotubes in Composites
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (43)
Show source-provided references
1. Device physics of solution-processed organic field-effect transistors10.1002/adma.200501152 ↗
2. Charge injection in solution-processed organic field-effect transistors: physics, models and characterization methods10.1002/adma.201104206 ↗
3. Energy-level alignment at organic/metal and organic/organic interfaces10.1002/adma.200802893 ↗
4. Advances in charge carrier mobilities of semiconducting polymers used in organic transistors10.1021/cm402421p ↗
5. Contact effects in polymer transistors10.1063/1.1512950 ↗
6. Analysis of the contact resistance in staggered, top-gate organic field-effect transistors10.1063/1.2804288 ↗
7. Controlling charge injection in organic field-effect transistors using self-assembled monolayers10.1021/nl060731i ↗
8. Large enhancement of hole injection in pentacene by modification of gold with conjugated self-assembled monolayers10.1016/j.orgel.2013.04.051 ↗
9. Effect of self-assembled monolayers on charge injection and transport in poly(3-hexylthiophene)-based field-effect transistors at different channel length scales10.1021/am200449x ↗
10. Dependence of charge carrier injection on the interface energy barrier in short-channel polymeric field effect transistors10.1063/1.3701271 ↗
11. Efficient charge injection in p-type polymer field-effect transistors with low-cost molybdenum electrodes through V2O5 interlayer10.1021/am401375c ↗
12. Reduction of charge injection barrier by 1-nm contact oxide interlayer in organic field effect transistors10.1063/1.3673842 ↗
13. Solution-processed zinc oxide as high-performance air-stable electron injector in organic ambipolar light-emitting field-effect transistors10.1002/adfm.201000785 ↗
14. Tuning the interfacial hole injection barrier between p-type organic materials and Co using a MoO3 buffer layer10.1063/1.4740455 ↗
15. A universal method to produce low-work function electrodes for organic electronics10.1126/science.1218829 ↗
16. Improved injection in n-type organic transistors with conjugated polyelectrolytes10.1021/ja908441c ↗
17. Carbon nanotubes as injection electrodes for organic thin film transistors10.1021/nl8033152 ↗
18. Miniature organic transistors with carbon nanotubes as quasi-one-dimensional electrodes10.1021/ja045900k ↗
19. Making contacts to n-type organic transistors using carbon nanotube arrays10.1021/nn1027032 ↗
20. Carbon nanotube electrodes in organic transistors10.1039/c3nr33727h ↗
21. Thermionic emission and tunneling at carbon nanotube–organic semiconductor interface10.1021/nn300544v ↗
22. Ambipolar copper phthalocyanine transistors with carbon nanotube array electrodes10.1063/1.3585658 ↗
23. Simultaneously grown single wall carbon nanotube channel and electrodes in a thin film transistor10.1557/mrc.2012.12 ↗
24. Fabrication of organic field effect transistor by directly grown poly(3-hexylthiophene) crystalline nanowires on carbon nanotube aligned array electrode10.1021/am200013y ↗
25. High-performance short channel organic transistors using densely aligned carbon nanotube array electrodes10.1063/1.3675639 ↗
26. Utilizing carbon nanotube electrodes to improve charge injection and transport in bis(trifluoromethyl)-dimethyl-rubrene ambipolar single crystal transistors10.1021/nn4045694 ↗
27. Enhanced ambipolar charge injection with semiconducting polymer/carbon nanotube thin films for light-emitting transistors10.1021/nn203874a ↗
28. Influence of molecular weight on the short-channel effect in polymer-based field-effect transistors10.1002/polb.22353 ↗
29. Close look at charge carrier injection in polymer field-effect transistors10.1063/1.1613369 ↗
30. Naphthalenedicarboximide- vs perylenedicarboximide-based copolymers. Synthesis and semiconducting properties in bottom-gate n-channel organic transistors10.1021/ja805407g ↗
31. A high-mobility electron-transporting polymer for printed transistors10.1038/nature07727 ↗
32. Efficient charge injection from a high work function metal in high mobility n-type polymer field-effect transistors10.1063/1.3424792 ↗
33. Remarkable enhancement of hole transport in top-gated n-type polymer field-effect transistors by a high-k dielectric for ambipolar electronic circuits10.1002/adma.201201464 ↗
34. Record high hole mobility in polymer semiconductors via side-chain engineering10.1021/ja405112s ↗
35. A stable solution-processed polymer semiconductor with record high-mobility for printed transistors10.1038/srep00754 ↗
36. High-performance ambipolar diketopyrrolopyrrole-thieno[3,2-b]thiophene copolymer field-effect transistors with balanced hole and electron mobilities10.1002/adma.201102786 ↗
37. Photovoltaics based on hybridization of effective dye-sensitized titanium oxide and hole-conductive polymer P3HT10.1002/adfm.200900283 ↗
38. Organic light-emitting diodes based on poly(9,9-dioctylfluorene-co-bithiophene) (F8T2)10.1002/adfm.200801260 ↗
39. Energy distribution of trapping and transport states in MDMO-PPV ([poly-(2-methoxyl, 5-(3,77dimethyloctyloxy)] para phenylenevinylene)10.1166/jnn.2012.4954 ↗
40. Very low amplified spontaneous emission threshold and electroluminescence characteristics of 1,1′-diphenyl substituted fluorene derivatives10.1016/j.optmat.2007.02.045 ↗
41. Selective dispersion of high purity semiconducting single-walled carbon nanotubes with regioregular poly(3-alkylthiophene)s10.1038/ncomms1545 ↗
42. Dissolution of small diameter single-wall carbon nanotubes in organic solvents?10.1039/b008042j ↗
43. Contact resistance in organic transistors that use source and drain electrodes formed by soft contact lamination10.1063/1.1568157 ↗