Enhanced power conversion efficiency and preferential orientation of the MAPbI3 perovskite solar cells by introduction of urea as additive
Source abstract
Abstract
Abstract In this investigation, urea (NH2CONH2) was added into the perovskite precursor solution with Pb(CH3COO)3 as precursor. The effects of the urea content in the solution on the crystallization dynamics and the orientation of the perovskite films, and their photovoltaic properties were investigated. The results showed that the optimal annealing duration for the perovskite film increased with the urea content in the solution. An interaction between the urea and the source materials was observed. As a result, urea addition in the Pb(CH3COO)3 based solution has an effect on the crystallization rate and the grain size of the perovskite phase. We found that the suitable amount of urea in the solution was beneficial for the formation of highly (110)-oriented perovskite films and this resulted in the corresponding solar cells with enhanced power conversion efficiency of nearly 17%.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Perovskite Materials and Applications · Conducting polymers and applications · Solid-state spectroscopy and crystallography
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (32)
Show source-provided references
1. A fluorene-terminated hole-transporting material for highly efficient and stable perovskite solar cells10.1038/s41560-018-0200-6 ↗
2. Sequential deposition as a route to high-performance perovskite-sensitized solar cells10.1038/nature12340 ↗
3. Lead-free, air-stable ultrathin Cs3Bi2I9 perovskite nanosheets for solar cells10.1016/j.solmat.2018.04.032 ↗
4. Solvent annealing of perovskite-induced crystal growth for photovoltaic-device efficiency enhancement10.1002/adma.201401685 ↗
5. Thermal assisted oxygen annealing for high efficiency planar CH3NH3PbI3 perovskite solar cells10.1038/srep06752 ↗
6. Additive enhanced crystallization of solution-processed perovskite for highly efficient planar-heterojunction solar cells10.1002/adma.201400231 ↗
7. Mixed-organic-cation perovskite photovoltaics for enhanced solar-light harvesting10.1002/anie.201309361 ↗
8. Compositional engineering of perovskite materials for high-performance solar cells10.1038/nature14133 ↗
9. Interface engineering of highly efficient perovskite solar cells10.1126/science.1254050 ↗
10. Planar perovskite solar cells with 15.75% power conversion efficiency by cathode and anode interfacial modification
11. Thermally stable MAPbI3 perovskite solar cells with efficiency of 19.19% and area over 1 cm2 achieved by additive engineering
12. An 80.11% FF record achieved for perovskite solar cells by using NH4Cl additive10.1039/C4NR02425G ↗
13. Additive engineering for high-performance room-temperature processed perovskite absorbers with micron-size grains and microsecond-range carrier lifetimes
14. Multifunctional benzoquinone additive for efficient and stable planar perovskite solar cells10.1002/adma.201603808 ↗
15. Lewis Acid-Base Adduct approach for high efficiency perovskite solar cells10.1021/acs.accounts.5b00440 ↗
16. High performance of pPlanar perovskite solar cells produced from PbI2(DMSO) and PbI2(NMP) complexes by intramolecular exchange10.1002/admi.201500768 ↗
17. Enhanced performance of perovskite solar cells by modulating the Lewis acid–base reaction10.1039/C6NR07450B ↗
18. PbI2-HMPA complex pretreatment for highly reproducible and efficient CH3NH3PbI3 perovskitesolar cells10.1021/jacs.6b08347 ↗
19. Highly efficient and stable perovskite solar cells based on monolithically grained CH3NH3PbI3 film10.1002/aenm.201602017 ↗
20. A bifunctional Lewis base additive for microscopic homogeneity in perovskite solar cells10.1016/j.chempr.2017.05.020 ↗
21. Investigation on the role of Lewis bases in the ripening process of perovskite films for highly efficient perovskite solar cells
22. High performance perovskite solar cell via multi-cycle low temperature processing of lead acetate precursor solutions10.1039/C5CC10608G ↗
23. Light and elevated temperature induced degradation (LeTID) in perovskite solar cells and development of stable semi-transparent cells10.1016/j.solmat.2018.08.017 ↗
24. Classical modelling of grain size and boundary effects in polycrystalline perovskite solar cells10.1016/j.solmat.2018.02.026 ↗
25. Toward tailored film morphologies: the origin of crystal orientation in hybrid perovskite thin films10.1002/admi.201600403 ↗
26. Particlesize determination from X-Ray line broadening10.1063/1.1707771 ↗
27. The synergistic effect of H2O and DMF towards stable and 20% efficiency inverted perovskite solar cells10.1039/C6EE03586H ↗
28. High-performance perovskite solar cells with large grain-size obtained by using the Lewis acid-base adduct of thiourea10.1002/solr.201800034 ↗
29. In situ dynamic observations of perovskite crystallisation and microstructure evolution intermediated from [PbI6]4− cage nanoparticles10.1038/ncomms15688 ↗
30. Efficient planar structured perovskite solar cells with enhanced open-circuit voltage and suppressed charge recombination based on a slow grown perovskite layer from lead acetate precursor10.1021/acsami.7b15229 ↗
31. Moisture-driven phase transition for improved perovskite solar cells with reduced trap-state density10.1007/s12274-017-1515-5 ↗
32. High-performance perovskite solar cells engineered by an ammonia modified graphene oxide interfacial layer10.1021/acsami.6b02064 ↗