Influence of aluminium electrode preparation on PCE values of polymeric solar cells based on P3HT and PCBM
Source abstract
Abstract
The main goal of the paper was investigation of influence of aluminum electrode preparation via thermal evaporation (TE) and the magnetron sputtering (MS) on power conversion efficiency (PCE) of polymeric solar cells. The photovoltaic properties of such three kinds devices based on poly(3-hexylthiophene-2,5-diyl) (P3HT) as ITO/P3HT/Al, ITO/P3HT:PCBM (1:1, w/w)/Al and ITO/PEDOT:PSS/P3HT:PCBM (1:1, w/w)/Al were investigated. For the constructed devices impedance spectroscopy were analyzed. For devices lack of PEDOT:PSS layer or lack of PCBM, photovoltaic parameters were very low and similar to the parameters obtained for device with Al electrode prepared by magnetron sputtering. The devices comprising PEDOT:PSS with P3HT:PCBM showed the best photovoltaic parameters such as a V OC of 0.60 V, J SC of 4.61 mA/cm 2, FF of 0.21, and PCE of 5.7 × 10 −1%.
Source: expertdata · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Organic Electronics and Photovoltaics · Conducting polymers and applications · Nanowire Synthesis and Applications
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (23)
Show source-provided references
1. Low band gap polymers for organic photovoltaics10.1016/j.solmat.2007.01.015 ↗
2. Conjugated polymer-based organic solar cells10.1021/cr050149z ↗
3. Polymer-fullerene composite solar cells10.1002/anie.200702506 ↗
4. Recent progress in polymer solar cells: manipulation of polymer: fullerene morphology and the formation of efficient inverted polymer solar cells10.1002/adma.200802854 ↗
5. Role of molecular architecture in organic photovoltaic cells10.1021/jz1000819 ↗
6. Conjugated polymers for high-efficiency organic photovoltaics10.1039/b9py00325h ↗
7. Conjugated polymer nanostructures for organic solar cell applications10.1039/c1py00275a ↗
8. Polymer-fullerene bulk-heterojunction solar cells10.1002/adma.200801283 ↗
9. Organic photovoltaic materials and devices10.1016/S1631-0705(02)01335-X ↗
10. Recent developments in magnetron sputtering10.1088/1009-0630/8/3/20 ↗
11. Magnetron sputtering: a review of recent developments and applications10.1016/S0042-207X(99)00189-X ↗
12. K. Wasa, M. Kitabatake, H. Adachi, Thin Film Materials Technology: Sputtering of Compound Materials, William Andrew Inc. and Springer-Verlag GmbH & Co. KG, 2004.10.1016/B978-081551483-1.50002-2 ↗
13. Theory of sputtering. I. Sputtering yield of amorphous and polycrystalline targets10.1103/PhysRev.184.383 ↗
14. Growth and morphology of sputtered aluminum thin films on P3HT surfaces10.1021/am101195m ↗
15. Deep blue, efficient, moderate micro cavity organic light-emitting diodes10.1016/j.orgel.2009.10.011 ↗
16. Fabrication and characterization of electro-phosphorescent organic light-emitting devices with a ferromagnetic cathode for observation of spin injection effect10.1016/j.synthmet.2009.07.023 ↗
17. Properties of ITO films deposited by RF superimposed DC magnetron sputtering10.1016/j.cap.2009.01.031 ↗
18. Morphological and electrical properties of indium tin oxide films prepared at a low processing temperature for flexible organic light-emitting devices10.1016/S0921-5107(01)00541-4 ↗
19. Transparent conductive electrode deposited by Cs-incorporated RF magnetron sputtering and evaluation of the damage in OLED organic layer10.1016/j.tsf.2007.10.042 ↗
20. The effect of Ar plasma bombardment upon physical property of tungsten oxide thin film in inverted top-emitting organic light-emitting diodes10.1016/j.orgel.2010.10.023 ↗
21. Origin of damages in OLED from Al top electrode deposition by DC magnetron sputtering10.1016/j.orgel.2009.11.011 ↗
22. Characteristics of Al doped ZnO co-sputtered In ZnO anode films prepared by direct current magnetron sputtering for organic light-emitting diodes10.1016/j.tsf.2008.05.035 ↗
23. Accelerated lifetime measurements of P3HT:PCBM solar cells10.1016/j.synthmet.2005.06.016 ↗