Synthesis and photovoltaic performance of a non-fullerene acceptor comprising siloxane-terminated alkoxyl side chain
Source abstract
Abstract
Abstract As an effective molecular modification strategy, side chain engineering has been widely used in promoting the photovoltaic performance of non-fullerene acceptors. Herein, a novel non-fullerene small molecular acceptor i-IEOSi-4F comprising siloxane-terminated alkoxyl side chain was successfully designed and synthesized. The molecule shows an optical band gap of 1.53 eV, with large extinction coefficient of 2.36 × 105 M−1 cm−1 in solution. Two fluorobenzotriazole based polymers J52 and PBZ-2Si with the same backbone units but different side chains were employed as the donor to construct the active layers that all can demonstrate suitable energy levels and complementary absorptions with i-IEOSi-4F. Relative to J52 only bearing alkyl side chain, PBZ-2Si with siloxane-terminated side chain could induce more balanced carrier transports and more favorable morphology, leading to a higher power conversion efficiency (PCE) of 12.66% with a good fill factor of 71.45%. The efficiency is 21% higher than that of 10.46% for the J52 based devices. Our results not only indicate that siloxane-terminated alkoxyl side chain is valuable for efficient non-fullerene acceptors, but also demonstrate that siloxane-terminated side chain on both polymer donor and small molecular acceptor is a useful combination to realize more efficient polymer solar cells.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Organic Electronics and Photovoltaics · Conducting polymers and applications · Perovskite Materials and Applications
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (84)
Show source-provided references
1. Enhanced power-conversion efficiency in polymer solar cells using an inverted device structure10.1038/nphoton.2012.190 ↗
2. Bulk heterojunction solar cells: morphology and performance relationships10.1021/cr400353v ↗
3. Oligomer molecules for efficient organic photovoltaics10.1021/acs.accounts.5b00363 ↗
4. Organic solar cells based on non-fullerene acceptors10.1038/nmat5063 ↗
5. Organic and solution-processed tandem solar cells with 17.3% efficiency10.1126/science.aat2612 ↗
6. Material insights and challenges for non-fullerene organic solar cells based on small molecular acceptors10.1038/s41560-018-0181-5 ↗
7. Fine-tuning of the chemical structure of photoactive materials for highly efficient organic photovoltaics10.1038/s41560-018-0263-4 ↗
8. High-performance conjugated polymer donor materials for polymer solar cells with narrow-bandgap nonfullerene acceptors10.1039/C9EE02531F ↗
9. Molecular design of benzodithiophene-based organic photovoltaic materials10.1021/acs.chemrev.6b00176 ↗
10. Development of novel conjugated donor polymers for high-efficiency bulk-heterojunction photovoltaic devices10.1021/ar900061z ↗
11. Polymer-fullerene composite solar cells10.1002/anie.200702506 ↗
12. Critical review of the molecular design progress in non-fullerene electron acceptors towards commercially viable organic solar cells10.1039/C7CS00892A ↗
13. Efficient organic solar cells processed from hydrocarbon solvents10.1038/nenergy.2015.27 ↗
14. Isomer effects of fullerene derivatives on organic photovoltaics and perovskite solar cells10.1021/acs.accounts.9b00159 ↗
15. An electron acceptor challenging fullerenes for efficient polymer solar cells10.1002/adma.201404317 ↗
16. High-performance fullerene-free polymer solar cells with 6.31% efficiency10.1039/C4EE03424D ↗
17. Design and synthesis of a low bandgap small molecule acceptor for efficient polymer solar cells10.1002/adma.201602642 ↗
18. Enhancing the performance of polymer solar cells via core engineering of NIR-absorbing electron acceptors10.1002/adma.201706571 ↗
19. Naphthodithiophene-based nonfullerene acceptor for high-performance organic photovoltaics: effect of extended conjugation
20. A near-infrared non-fullerene electron acceptor for high performance polymer solar cells10.1039/C7EE00844A ↗
21. Extended conjugation length of nonfullerene acceptors with improved planarity via noncovalent interactions for high-performance organic solar cells10.1002/aenm.201801618 ↗
22. Terthieno[3,2-b]thiophene (6T) based low bandgap fused-ring electron acceptor for highly efficient solar cells with a high short-circuit current density and low open-circuit voltage loss10.1002/aenm.201702831 ↗
23. Design of a new fused-ring electron acceptor with excellent compatibility to wide-bandgap polymer donors for high-performance organic photovoltaics
24. Highly efficient organic solar cells based on S,N-heteroacene non-fullerene acceptors10.1021/acs.chemmater.8b02276 ↗
25. Nonfullerene acceptor for organic solar cells with chlorination on dithieno[3,2-b:2′,3′-d]pyrrol fused-ring10.1021/acsenergylett.9b00147 ↗
26. Side-chain isomerization on an n-type organic semiconductor ITIC acceptor makes 11.77% high efficiency polymer solar cells10.1021/jacs.6b09110 ↗
27. Significant enhancement of the photovoltaic performance of organic small molecule acceptors via side-chain engineering10.1039/C8TA01509K ↗
28. Enhancing indacenodithiophene acceptor crystallinity via substituent manipulation increases organic solar cell efficiency10.1021/acs.chemmater.7b04616 ↗
29. Controlling molecular packing and orientation via constructing a ladder-type electron acceptor with asymmetric substituents for thick-film nonfullerene solar cells10.1021/acsami.8b19596 ↗
30. A high dielectric constant non-fullerene acceptor for efficient bulk-heterojunction organic solar cells10.1039/C7TA10136H ↗
31. An alkylated indacenodithieno[3,2-b]thiophene-based nonfullerene acceptor with high crystallinity exhibiting single junction solar cell efficiencies greater than 13% with low voltage losses10.1002/adma.201800728 ↗
32. A nonfullerene semitransparent tandem organic solar cell with 10.5% power conversion efficiency10.1002/aenm.201800529 ↗
33. Boron(iii) β-diketonate-based small molecules for functional non-fullerene polymer solar cells and organic resistive memory devices10.1039/D0SC04047A ↗
34. Substitution effect on thiobarbituric acid end groups for high open-circuit voltage non-fullerene organic solar cells10.1021/acsami.0c11828 ↗
35. Enhancing the performance of the electron acceptor ITIC-Th via tailoring its end groups10.1039/C7QM00547D ↗
36. Fused heptacyclic-based acceptor–donor–acceptor small molecules: N-substitution toward high-performance solution-processable field-effect transistors10.1021/acs.chemmater.8b05054 ↗
37. Isomer-free: precise positioning of chlorine-induced interpenetrating charge transfer for elevated solar conversion10.1016/j.isci.2019.06.033 ↗
38. Design, synthesis, and photovoltaic characterization of a small molecular acceptor with an ultra-narrow band gap10.1002/anie.201610944 ↗
39. Dual sensitizer and processing-aid behavior of donor enables efficient ternary organic solar cells10.1016/j.joule.2019.01.009 ↗
40. Efficient and mechanically robust ultraflexible organic solar cells based on mixed acceptors10.1016/j.joule.2019.10.007 ↗
41. Molecular optimization enables over 13% efficiency in organic solar cells10.1021/jacs.7b02677 ↗
42. 14.7% Efficiency organic photovoltaic cells enabled by active materials with a large electrostatic potential difference10.1021/jacs.8b12937 ↗
43. Low-energy-loss polymer solar cells with 14.52% efficiency enabled by wide-band-gap copolymers10.1016/j.isci.2018.12.027 ↗
44. Energy-level modulation of small-molecule electron acceptors to achieve over 12% efficiency in polymer solar cells10.1002/adma.201602776 ↗
45. High-efficiency nonfullerene organic solar cells: critical factors that affect complex multi-length scale morphology and device performance10.1002/aenm.201602000 ↗
46. Single-junction organic solar cell with over 15% efficiency using fused-ring acceptor with electron-deficient core10.1016/j.joule.2019.01.004 ↗
47. Rational tuning of molecular interaction and energy level alignment enables high-performance organic photovoltaics
48. Fused benzothiadiazole: a building block for n-type organic acceptor to achieve high-performance organic solar cells10.1002/adma.201807577 ↗
49. Enabling low voltage losses and high photocurrent in fullerene-free organic photovoltaics10.1038/s41467-019-08386-9 ↗
50. Alkyl chain tuning of small molecule acceptors for efficient organic solar cells10.1016/j.joule.2019.09.010 ↗
51. Over 16% efficiency organic photovoltaic cells enabled by a chlorinated acceptor with increased open-circuit voltages10.1038/s41467-019-10351-5 ↗
52. New phase for organic solar cell research: emergence of Y-series electron acceptors and their perspectives10.1021/acsenergylett.0c00537 ↗
53. 18% Efficiency organic solar cells10.1016/j.scib.2020.01.001 ↗
54. Achieving an efficient and stable morphology in organic solar cells via fine-tuning the side chains of small-molecule acceptors10.1021/acs.chemmater.0c00097 ↗
55. Effect of non-fullerene acceptors' side chains on the morphology and photovoltaic performance of organic solar cells10.1021/acsami.7b09915 ↗
56. Nonfullerene small-molecule acceptors with perpendicular side-chains for fullerene-free solar cells10.1039/C8TA04718A ↗
57. The effect of alkyl chain branching positions on the electron mobility and photovoltaic performance of naphthodithiophene diimide (NDTI)-based polymers10.1007/s11426-019-9645-1 ↗
58. Tuning the intermolecular interaction of A2-A1-D-A1-A2 type non-fullerene acceptors by substituent engineering for organic solar cells with ultrahigh VOC of ~1.2 V10.1007/s11426-020-9840-x ↗
59. A simple phenyl group introduced at the tail of alkyl side chains of small molecular acceptors: new strategy to balance the crystallinity of acceptors and miscibility of bulk heterojunction enabling highly efficient organic solar cells
60. Conjugated side-chain optimization of indacenodithiophene-based nonfullerene acceptors for efficient polymer solar cells
61. Improved average figure-of-merit of high-efficiency nonfullerene solar cells via minor combinatory side chain approach10.1002/solr.202000062 ↗
62. Synergistic effect of side-chain and backbone engineering in thieno[2,3-f]benzofuran-based conjugated polymers for high performance non-fullerene organic solar cells10.1039/C8TA07544A ↗
63. The effects of side chains on the charge mobilities and functionalities of semiconducting conjugated polymers beyond solubilities10.1002/adma.201903104 ↗
64. Siloxane-terminated solubilizing side chains: bringing conjugated polymer backbones closer and boosting hole mobilities in thin-film transistors10.1021/ja209328m ↗
65. Solution-processable ambipolar diketopyrrolopyrrole-selenophene polymer with unprecedentedly high hole and electron mobilities10.1021/ja308927g ↗
66. Low band gap conjugated polymers combining siloxane-terminated side chains and alkyl side chains: side-chain engineering achieving a large active layer processing window for PCE > 10% in polymer solar cells10.1039/C7TA05583H ↗
67. Impact of the siloxane-terminated side chain on photovoltaic performances of the dithienylbenzodithiophene-difluorobenzotriazole-based wide band gap polymer donor in non-fullerene polymer solar cells10.1021/acsami.9b08722 ↗
68. Organic solar cells based on high hole mobility conjugated polymer and nonfullerene acceptor with comparable bandgaps and suitable energy level offsets showing significant suppression of Jsc–Voc trade-off
69. Significantly enhanced electron transport of a nonfullerene acceptor in a blend film with a high hole mobility polymer of high molecular weight: thick-film nonfullerene polymer solar cells showing a high fill factor10.1039/D0TA01340D ↗
70. Introduction of siloxane-terminated side chains into semiconducting polymers to tune phase separation with nonfullerene acceptor for polymer solar cells10.1021/acsami.9b18963 ↗
71. Dramatically different photovoltaic effect induced by siloxane-terminated combinatory side chain in polymer solar cells10.1016/j.synthmet.2019.116116 ↗
72. Improved average figure-of-merit of high-efficiency nonfullerene solar cells via minor combinatory side chain approach10.1002/solr.202000062 ↗
73. Non-fullerene polymer solar cells based on alkylthio and fluorine substituted 2D-conjugated polymers reach 9.5% efficiency10.1021/jacs.6b01744 ↗
74. Crystallography, morphology, electronic structure, and transport in non-fullerene/non-indacenodithienothiophene polymer:Y6 solar cells10.1021/jacs.0c05560 ↗
75. Nonfullerene polymer solar cells based on a main-chain twisted low-bandgap acceptor with power conversion efficiency of 13.2%10.1021/acsenergylett.8b00627 ↗
76. 3,4‐Dicyanothiophene—a Versatile building block for efficient nonfullerene polymer solar cells
77. Diketopyrrolopyrrole-based conjugated polymers bearing branched oligo(ethylene glycol) side chains for photovoltaic devices10.1002/anie.201602775 ↗
78. High-performance non-fullerene polymer solar cells based on a pair of donor-acceptor materials with complementary absorption properties10.1002/adma.201502775 ↗
79. A highly crystalline wide-band-gap conjugated polymer toward high-performance as-cast nonfullerene polymer solar cells10.1021/acsami.7b10059 ↗
80. Polar and nonpolar interactions in adhesion10.1080/00218467308078437 ↗
81. Dithienobenzoxadiazole-based wide bandgap donor polymers with strong aggregation properties for the preparation of efficient as-cast non-fullerene polymer solar cells processed using a non-halogenated solvent
82. Controlling the cyano-containing A2 segments in A2-A1-D-A1-A2 type non-fullerene acceptors to combine with a benzotriazole-based p-type polymer: “same-acceptor-strategy” for high Voc organic solar cells10.1002/solr.201800332 ↗
83. Effect of acceptor strength in new acceptor–donor–acceptor-type molecules on their miscibility with donor polymers for bulk-heterojunction fullerene-free solar cells10.1016/j.dyepig.2017.07.010 ↗
84. Improved thin film morphology and bulk-heterojunction solar cell performance through systematic tuning of the surface energy of conjugated polymers10.1039/c2jm15517f ↗