journal article·2020-03

Modified HTL-induced efficiency enhancement for inverted perovskite solar cells

Zhiqiang Zhao, Lin Yuan, Jing Huang, Jiayi Shi, Yang Cao, Wei Zi, Wenfeng Zhang

Publisher page

Abstract

Abstract Poly(3,4-ethylene dioxythiophene):poly(styrene sulfonate) (PEDOT:PSS) was doped by 3-(Cyclohexylamino)-2-hydroxy-1-propanesulfonic acid (CAPSO), leading to dramatic improvement of its conductivity and consequently efficiency enhancement in inverted perovskite solar cells (PSCs) based on PEDOT:PSS hole transport layer (HTL). Under the optimized CAPSO doping concentration, the conductivity of PEDOT:PSS film increased by about three orders of magnitude, and this is interpreted by the weakening of the coulombic attractions between PEDOT and PSS components induced by CAPSO. CAPSO doped PEDOT:PSS (PEDOT:PSS@CAPSO) was applied as HTL of PSCs devices based on CH3NH3PbI3 layers, leading to the best power conversion efficiency (PCE) of ~38% enhanced relative to those of the corresponding reference devices based on pristine PEDOT:PSS HTL. Scanning Kelvin probe microscopy (SKPM) results show that the work function of PEDOT@CAPSO matches well with the valence band of CH3NH3PbI3 absorbers. The research demonstrates that the zwitterion modified PEDOT:PSS could act as an outstanding hole transport material for fabricating high-efficient perovskite solar cells.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Perovskite Materials and Applications · Conducting polymers and applications · Organic Electronics and Photovoltaics

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (40)

Show source-provided references
1. Surface passivation of perovskite film for efficient solar cells
2. Efficient, stable and scalable perovskite solar cells using poly(3-hexylthiophene)10.1038/s41586-019-1036-3 ↗
3. Polymer-templated nucleation and crystal growth of perovskite films for solar cells with efficiency greater than 21%10.1038/nenergy.2016.142 ↗
4. Perovskite seeding growth of formamidinium-lead-iodide-based perovskites for efficient and stable solar cells10.1038/s41467-018-04029-7 ↗
5. Boron and phosphorus co-doped carbon counter electrode for efficient hole-conductor-free perovskite solar cell10.1016/j.cej.2016.12.050 ↗
6. Molecular modulator for stable inverted planar perovskite solar cells with efficiency enhanced by interface engineering10.1039/C9TC03259B ↗
7. A generalized crystallization protocol for scalable deposition of high-quality perovskite thin films for photovoltaic applications10.1002/advs.201901067 ↗
8. Additive-enhanced crystallization of solution process for planar perovskite solar cells with efficiency exceeding 1910.1002/chem.201704181 ↗
9. Photovoltaics. Interface engineering of highly efficient perovskite solar cells10.1126/science.1254050 ↗
10. Direct formation of I3- ions in organic cation solution for efficient perovskite solar cells10.1016/j.solmat.2018.05.017 ↗
11. A biopolymer heparin sodium interlayer anchoring TiO2 and MAPbI3 enhances trap passivation and device stability in perovskite solar cells10.1002/adma.201706924 ↗
12. How to design more efficient hole-transporting materials for perovskite solar cells? Rational tailoring of the triphenylamine-based electron donor10.1039/C8NR04730H ↗
13. Bifacial passivation of organic hole transport interlayer for NiOx -based p-i-n perovskite solar cells10.1002/advs.201802163 ↗
14. Influence of nonfused cores on the photovoltaic performance of linear triphenylamine-based hole-transporting materials for perovskite solar cells10.1021/acsami.8b02090 ↗
15. Dithieno[3,2-b:2′,3′-d]pyrrole-based hole transport materials for perovskite solar cells with efficiencies over 18%10.1039/C8TA01773E ↗
16. Thermal-evaporated selenium as a hole-transporting material for planar perovskite solar cells10.1016/j.solmat.2018.05.022 ↗
17. Alternative benzodithiophene (BDT) based polymeric hole transport layer for efficient perovskite solar cells10.1016/j.solmat.2017.04.002 ↗
18. Solution processed pristine PDPP3T polymer as hole transport layer for efficient perovskite solar cells with slower degradation10.1016/j.solmat.2015.10.008 ↗
19. Environmentally friendly plasma-treated PEDOT:PSS as electrodes for ITO-free perovskite solar cells10.1021/acsami.7b10987 ↗
20. Conductivity enhancement of PEDOT:PSS film via sulfonic acid modification: application as transparent electrode for ITO-free polymer solar cells10.1007/s11426-017-9205-x ↗
21. In situ polymerization of ethylenedioxythiophene from sulfonated carbon nanotube templates: toward high efficiency ITO-free solar cells10.1039/C6TA00287K ↗
22. Modulation of PEDOT:PSS pH for efficient inverted perovskite solar cells with reduced potential loss and enhanced stability10.1021/acsami.6b11757 ↗
23. Phthalocyanines and porphyrinoid analogues as hole- and electron-transporting materials for perovskite solar cells10.1039/C9CS00059C ↗
24. Enhancing the performance of planar heterojunction perovskite solar cells using stable semiquinone and amine radical modified hole transport layer10.1016/j.jpowsour.2018.04.049 ↗
25. Efficiency enhancement of polymer solar cells via zwitterion doping in PEDOT:PSS hole transport layer10.1016/j.orgel.2015.09.022 ↗
26. Tuning hole transport layer using urea for high-performance perovskite solar cells
27. Improving the conductivity of PEDOT:PSS hole transport layer in polymer solar cells via copper(II) bromide salt doping10.1021/am505387q ↗
28. PEDOT:PSS films with significantly enhanced conductivities induced by preferential solvation with cosolvents and their application in polymer photovoltaic cells10.1039/c0jm04177g ↗
29. Salt-induced charge screening and significant conductivity enhancement of conducting poly(3,4-ethylenedioxythiophene):poly(styrenesulfonate)10.1021/ma900327d ↗
30. High-efficiency ITO-free polymer solar cells using highly conductive PEDOT:PSS/surfactant bilayer transparent anodes10.1039/c3ee41077c ↗
31. Anion effect on salt-induced conductivity enhancement of poly(3,4-ethylenedioxythiophene):poly(styrenesulfonate) films10.1016/j.orgel.2010.04.007 ↗
32. Defect and contact passivation for perovskite solar cells10.1002/adma.201900428 ↗
33. Defect passivation in hybrid perovskite solar cells using quaternary ammonium halide anions and cations10.1038/nenergy.2017.102 ↗
34. Bulk heterojunction perovskite–PCBM solar cells with high fill factor10.1038/nphoton.2016.3 ↗
35. Accelerated formation and improved performance of CH3NH3PbI3-based perovskite solar cells via solvent coordination and anti-solvent extraction10.1039/C6TA10526B ↗
36. Unreacted PbI2 as a double-edged sword for enhancing the performance of perovskite solar cells10.1021/jacs.6b06320 ↗
37. Performance improvement of perovskite solar cells through enhanced hole extraction: the role of iodide concentration gradient10.1016/j.solmat.2018.05.025 ↗
38. Bias-dependent normal and inverted J–V hysteresis in perovskite solar cells10.1021/acsami.8b07298 ↗
39. Inverted current–voltage hysteresis in perovskite solar cells10.1021/acsenergylett.8b01606 ↗
40. Hole transport enhancing effects of polar solvents on poly(3,4-ethylenedioxythiophene):poly(styrene sulfonic acid) for organic solar cells10.1021/am301320m ↗