journal article·2019-10

Defect site engineering for charge recombination and stability via polymer surfactant incorporation with an ultra-small amount in perovskite solar cells

Jungyun Hong, Hyebin Kim, Inchan Hwang

Publisher page

Abstract

Abstract A reduction in defect sites that are produced in the process of perovskite crystallization is crucial for efficient perovskite solar cells. In this study, we incorporate an ultra-small amount (less than 0.1 wt%) of a non-volatile polymer additive, poly(ethylene glycol) tridecyl ether (PTE), into the perovskite precursor solution in order to regulate the crystallization kinetics. Even a tiny amount of PTE additives enables effectively to make film surface smooth, suppress charge recombination both between free charge carriers and between trapped and free charge carriers, and improve the electrical stability under continuous illumination. Our findings show that the defects are associated not only with charge recombination but also with electrical stability under illumination. Incorporating PTE additives, charge extraction is facilitated by a reduction in the loss of photogenerated charge carriers, leading to an improvement in photovoltaic efficiency with enhanced stability for the planar p-i-n perovskite solar cells.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Perovskite Materials and Applications · Conducting polymers and applications · Organic Electronics and Photovoltaics

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (55)

Show source-provided references
1. Mechanism for rapid growth of organic–inorganic halide perovskite crystals10.1038/ncomms13303 ↗
2. Non-wetting surface-driven high-aspect-ratio crystalline grain growth for efficient hybrid perovskite solar cells10.1038/ncomms8747 ↗
3. Integrated planar and bulk dual heterojunctions capable of efficient electron and hole extraction for perovskite solar cells with >17% efficiency10.1016/j.nanoen.2016.12.029 ↗
4. Aging-induced light-soaking effects and open-circuit voltage hysteretic behavior of inverted perovskite solar cells incorporating a hole transport metal halide layer via morphology-dependent inflow of iodide ions10.1039/C8TC04723E ↗
5. Controlling nucleation and growth of metal halide perovskite thin films for high-efficiency perovskite solar cells10.1002/smll.201602808 ↗
6. Controlling the crystallization and grain size of sequentially deposited planar perovskite films via the permittivity of the conversion solution10.1016/j.orgel.2017.07.025 ↗
7. Controlling thin-film stress and wrinkling during perovskite film formation10.1021/acsenergylett.8b00544 ↗
8. Management of perovskite intermediates for highly efficient inverted planar heterojunction perovskite solar cells10.1039/C6TA09554B ↗
9. Solvent-mediated crystallization of CH3NH3SnI3 films for heterojunction depleted perovskite solar cells10.1021/jacs.5b06658 ↗
10. Photovoltaic performance of perovskite solar cells with different grain sizes10.1002/adma.201504144 ↗
11. High-efficiency solution-processed perovskite solar cells with millimeter-scale grains10.1126/science.aaa0472 ↗
12. Structure and growth control of organic–inorganic halide perovskites for optoelectronics: from polycrystalline films to single crystals10.1002/advs.201500392 ↗
13. Morphology engineering: a route to highly reproducible and high efficiency perovskite solar cells10.1002/cssc.201601387 ↗
14. Ultrasmooth metal halide perovskite thin films via sol–gel processing10.1039/C6TA03092K ↗
15. Efficient perovskite solar cells by temperature control in single and mixed halide precursor solutions and films10.1021/acs.jpcc.5b08294 ↗
16. The mechanism of toluene-assisted crystallization of organic–inorganic perovskites for highly efficient solar cells10.1039/C6TA01087C ↗
17. Temperature-assisted rapid nucleation: a facile method to optimize the film morphology for perovskite solar cells10.1039/C7TA06334B ↗
18. Solvent annealing of perovskite-induced crystal growth for photovoltaic-device efficiency enhancement10.1002/adma.201401685 ↗
19. Control of preferred orientation with slow crystallization for carbon-based mesoscopic perovskite solar cells attaining efficiency 15%10.1039/C6TA09036B ↗
20. Crystallization kinetics and morphology control of formamidinium–cesium mixed-cation lead mixed-halide perovskite via tunability of the colloidal precursor solution10.1002/adma.201607039 ↗
21. Material nucleation/growth competition tuning towards highly reproducible planar perovskite solar cells with efficiency exceeding 20%10.1039/C7TA00027H ↗
22. Ultrasmooth organic–inorganic perovskite thin-film formation and crystallization for efficient planar heterojunction solar cells10.1038/ncomms7142 ↗
23. Nucleation and crystal growth of organic–inorganic lead halide perovskites under different relative humidity10.1021/acsami.5b00895 ↗
24. Crystal growth engineering for high efficiency perovskite solar cells10.1039/C6CE00813E ↗
25. Additive to regulate the perovskite crystal film growth in planar heterojunction solar cells10.1063/1.4906073 ↗
26. Controlling nucleation, growth, and orientation of metal halide perovskite thin films with rationally selected additives10.1039/C6TA07671H ↗
27. Transformation from crystalline precursor to perovskite in PbCl2-derived MAPbI310.1038/s41467-018-05937-4 ↗
28. Tuning perovskite morphology by polymer additive for high efficiency solar cell10.1021/acsami.5b00052 ↗
29. The additive coordination effect on hybrids perovskite crystallization and high-performance solar cell10.1002/adma.201603021 ↗
30. Additive engineering for highly efficient organic–inorganic halide perovskite solar cells: recent advances and perspectives10.1039/C7TA01798G ↗
31. Additive enhanced crystallization of solution-processed perovskite for highly efficient planar-heterojunction solar cells10.1002/adma.201400231 ↗
32. Enhanced efficiency of planar perovskite solar cells via a two-step deposition using DMF as an additive to optimize the crystal growth behavior10.1039/C7TA01517H ↗
33. A bifunctional Lewis base additive for microscopic homogeneity in perovskite solar cells10.1016/j.chempr.2017.05.020 ↗
34. Crystallization kinetics of organic–inorganic trihalide perovskites and the role of the lead anion in crystal growth10.1021/ja512117e ↗
35. Management of perovskite intermediates for highly efficient inverted planar heterojunction perovskite solar cells10.1039/C6TA09554B ↗
36. Effective control of crystal grain size in CH3NH3PbI3 perovskite solar cells with a pseudohalide Pb(SCN)2 additive10.1039/C6CE00842A ↗
37. The roles of alkyl halide additives in enhancing perovskite solar cell performance10.1039/C4TA05012F ↗
38. Surfactant enhanced surface coverage of CH3NH3PbI3−xClx perovskite for highly efficient mesoscopic solar cells10.1016/j.jpowsour.2014.08.095 ↗
39. Ammonium-iodide-salt additives induced photovoltaic performance enhancement in one-step solution process for perovskite solar cells10.1016/j.jallcom.2016.05.154 ↗
40. Enhancing the grain size of organic halide perovskites by sulfonate-carbon nanotube incorporation in high performance perovskite solar cells10.1039/C6CC00268D ↗
41. Ionic additive engineering toward high-efficiency perovskite solar cells with reduced grain boundaries and trap density
42. A polymer scaffold for self-healing perovskite solar cells10.1038/ncomms10228 ↗
43. Polymer-templated nucleation and crystal growth of perovskite films for solar cells with efficiency greater than 21%10.1038/nenergy.2016.142 ↗
44. Perovskite-polymer composite cross-linker approach for highly-stable and efficient perovskite solar cells10.1038/s41467-019-08455-z ↗
45. Recent progress on the long-term stability of perovskite solar cells10.1002/advs.201700387 ↗
46. Elimination of the light soaking effect and performance enhancement in perovskite solar cells using a fullerene derivative10.1039/C6EE01337F ↗
47. The effect of the microstructure on trap-assisted recombination and light soaking phenomenon in hybrid perovskite solar cells10.1002/adfm.201602519 ↗
48. Polymer-modified halide perovskite films for efficient and stable planar heterojunction solar cells10.1126/sciadv.1700106 ↗
49. Temperature-dependent charge transport in solution-processed perovskite solar cells with tunable trap concentration and charge recombination10.1039/C7TC02646C ↗
50. Ultrathin efficient perovskite solar cells employing a periodic structure of a composite hole conductor for elevated plasmonic light harvesting and hole collection10.1039/C5NR05042A ↗
51. Dopant-free zinc chlorophyll aggregates as an efficient biocompatible hole transporter for perovskite solar cells10.1002/cssc.201601069 ↗
52. Bifunctional polymer nanocomposites as hole-transport layers for efficient light harvesting: application to perovskite solar cells10.1021/acsami.5b08157 ↗
53. Impact of hydroxyl groups boosting heterogeneous nucleation on perovskite grains and photovoltaic performances10.1021/acs.jpcc.8b05374 ↗
54. Effects of a molecular monolayer modification of NiO nanocrystal layer surfaces on perovskite crystallization and interface contact toward faster hole extraction and higher photovoltaic performance10.1002/adfm.201505215 ↗
55. Migration of cations induces reversible performance losses over day/night cycling in perovskite solar cells10.1039/C6EE03352K ↗