journal article·2017-11

Low bandgap polymers based on bay-annulated indigo for organic photovoltaics: Enhanced sustainability in material design and solar cell fabrication

Jeroen Brebels, Karine C.C.W.S. Klider, Mathias Kelchtermans, Pieter Verstappen, Melissa Van Landeghem, Sabine Van Doorslaer, Etienne Goovaerts, Jarem R. Garcia, Jean Manca, Laurence Lutsen, Dirk Vanderzande, Wouter Maes

Publisher page

Abstract

Abstract Although research in the field of organic photovoltaics (OPV) still merely focuses on efficiency, efforts to increase the sustainability of the production process and the materials encompassing the device stack are of equally crucial importance to fulfil the promises of a truly renewable source of energy. In this study, a number of steps in this direction are taken. The photoactive polymers all contain an electron-deficient building block inspired on the natural indigo dye, bay-annulated indigo, combined with electron-rich thiophene and 4 H -dithieno[3,2- b :2′,3′- d ]pyrrole units. The synthetic protocol (starting from indigo) is optimized and the final materials are thoroughly analyzed. MALDI-TOF mass spectrometry provides detailed information on the structural composition of the polymers. Best solar cell efficiencies are obtained for polymer:fullerene blends spin-coated from a pristine non-halogenated solvent ( o -xylene), which is highly recommended to reduce the ecological footprint of OPV and is imperative for large scale production and commercialization.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Organic Electronics and Photovoltaics · Conducting polymers and applications · Organic Light-Emitting Diodes Research

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (64)

Show source-provided references
1. A thienoisoindigo-naphthalene polymer with ultrahigh mobility of 14.4 cm2/V·s that substantially exceeds benchmark values for amorphous silicon semiconductors10.1021/ja504537v ↗
2. Mobility exceeding 10 cm2/(V·s) in donor-acceptor polymer transistors with band-like charge transport10.1021/acs.chemmater.5b04567 ↗
3. Donor-acceptor polymers10.1021/jacs.5b07015 ↗
4. Polymer-fullerene bulk-heterojunction solar cells10.1002/adma.200801283 ↗
5. Ultrathin and lightweight organic solar cells with high flexibility10.1038/ncomms1772 ↗
6. Organic photovoltaics10.1016/S1369-7021(13)70013-0 ↗
7. The case for organic photovoltaics10.1039/c3ra42989j ↗
8. Life cycle analyses of organic photovoltaics: a review10.1039/c3ee42653j ↗
9. 25th anniversary article: a decade of organic/polymeric photovoltaic research10.1002/adma.201302563 ↗
10. The future of organic photovoltaics10.1039/C4CS00227J ↗
11. Bulk-heterojunction organic solar cells: five core technologies for their commercialization10.1002/adma.201601197 ↗
12. A new class of small band gap organic polymer conductors10.1007/BF00558045 ↗
13. Design of narrow-bandgap polymers. Syntheses and properties of monomers and polymers containing aromatic-donor and o-quinoid-acceptor units10.1021/cm950467m ↗
14. Bulk heterojunction solar cells with internal quantum efficiency approaching 100%10.1038/nphoton.2009.69 ↗
15. New form of an old natural dye: bay-annulated indigo (BAI) as an excellent electron accepting unit for high performance organic semiconductors10.1021/ja508807m ↗
16. Rational tuning of the high energy visible light absorption for panchromatic small molecules by a two-dimensional conjugation approach10.1039/C6SC00428H ↗
17. Low bandgap conjugated polymers based on a nature-inspired bay-annulated indigo (BAI) acceptor as stable electrochromic materials10.1021/acssuschemeng.6b00303 ↗
18. Stepwise bay annulation of indigo for the synthesis of desymmetrized electron acceptors and donor−acceptor constructs10.1021/acs.orglett.6b02504 ↗
19. Indolo-naphthyridine-6,13-dione thiophene building block for conjugated polymer electronics: molecular origin of ultrahigh n-type mobility10.1021/acs.chemmater.6b03671 ↗
20. A nature-inspired conjugated polymer for high performance transistors and solar cells10.1021/acs.macromol.5b00542 ↗
21. 25th anniversary article: isoindigo-based polymers and small molecules for bulk heterojunction solar cells and field effect transistors10.1002/adma.201304945 ↗
22. A pentacyclic aromatic lactam building block for efficient polymer solar cells10.1039/c3ee41948g ↗
23. A hexacyclic ladder-type building block for high-performance D-A copolymers10.1039/C5TA07942J ↗
24. A heptacyclic acceptor unit developed for D-A copolymers used in polymer solar cells10.1039/C5PY01761K ↗
25. Imide- and amide-functionalized polymer semiconductors10.1021/cr500225d ↗
26. Fullerene-free polymer solar cells with over 11% efficiency and excellent thermal stability10.1002/adma.201600281 ↗
27. Efficient organic solar cells processed from hydrocarbon solvents10.1038/nenergy.2015.27 ↗
28. Effect of synthetic accessibility on the commercial viability of organic photovoltaics10.1039/c3ee24138f ↗
29. “All that glisters is not gold”: an analysis of the synthetic complexity of efficient polymer donors for polymer solar cells10.1021/ma501894w ↗
30. Continuous flow polymer synthesis toward reproducible large-scale production for efficient bulk heterojunction organic solar cells10.1002/cssc.201500850 ↗
31. Effects of solvent mixtures on the nanoscale phase separation in polymer solar cells10.1002/adfm.200701459 ↗
32. Structural order in bulk heterojunction films prepared with solvent additives10.1002/adma.201003690 ↗
33. Technology development for roll-to-roll production of organic photovoltaics10.1016/j.cep.2010.07.012 ↗
34. Determination of solvent systems for blade coating thin film photovoltaics10.1002/adfm.201501039 ↗
35. Green-solvent-processable organic solar cells10.1016/j.mattod.2016.02.019 ↗
36. Highly efficient thieno[3,4-c]pyrrole-4,6-dione-based solar cells processed from non-chlorinated solvent10.1016/j.orgel.2013.12.012 ↗
37. Highly efficient polymer solar cells cast from non-halogenated xylene/anisaldehyde solution10.1039/C5EE01917F ↗
38. High-efficiency polymer solar cells enabled by environment-friendly single-solvent processing10.1002/aenm.201502177 ↗
39. Regioregular D1-A-D2-a terpolymer with controlled thieno[3,4-b]thiophene orientation for high-efficiency polymer solar cells processed with nonhalogenated solvents10.1021/acs.macromol.6b00269 ↗
40. Efficient polymer solar cells processed by environmentally friendly halogen-free solvents10.1039/C6RA04835H ↗
41. New processable phenanthridinone-based polymers for organic solar cell applications10.1002/aenm.201502094 ↗
42. A new quinoxaline and isoindigo based polymer as donor material for solar cells: role of ecofriendly processing solvents on the device efficiency and stability10.1002/pola.28361 ↗
43. Enhanced open-circuit voltage in polymer solar cells by dithieno[3,2-b:2′,3′-d]pyrrole N-acylation10.1039/C4TA00525B ↗
44. N-Acyl-dithieno[3,2-b:2′,3′-d]pyrrole based low bandgap copolymers affording improved open-circuit voltages and efficiencies in polymer solar cells10.1016/j.solmat.2014.12.037 ↗
45. Impact of structure and homo-coupling of the central donor unit of small molecule organic semiconductors on solar cell performance10.1039/C6RA06146J ↗
46. Benzobisthiazole-based donor–acceptor copolymer semiconductors for photovoltaic cells and highly stable field-effect transistors10.1021/ma201128x ↗
47. N-acyldithieno[3,2-b:2′,3′-d]pyrroles: second generation dithieno[3,2-b:2′,3′-d]pyrrole building blocks with stabilized energy levels10.1021/ol101647f ↗
48. Controlling molecular weight of a high efficiency donor-acceptor conjugated polymer and understanding its significant impact on photovoltaic properties10.1002/adma.201305251 ↗
49. Effect of molecular weight on morphology and photovoltaic properties in P3HT: PCBM solar cells10.1016/j.orgel.2015.02.017 ↗
50. Molar mass versus polymer solar cell performance: highlighting the role of homocouplings10.1021/acs.chemmater.5b00939 ↗
51. Systematic analysis of polymer molecular weight influence on the organic photovoltaic performance10.1002/marc.201500398 ↗
52. Small-bandgap semiconducting polymers with high near-infrared photoresponse10.1021/ja506265h ↗
53. Elucidating batch-to-batch variation caused by homocoupled side products in solution processable organic solar cells10.1021/acs.chemmater.6b04143 ↗
54. Mechanistic studies of effect of dispersity on the photovoltaic performance of PTB7 polymer solar cells10.1021/cm5042953 ↗
55. Using bis(pinacolato)diboron to improve the quality of regioregular conjugated co-polymers10.1039/C0JM02359K ↗
56. Amphiphilic N-methylimidazole-functionalized diblock copolythiophenes for organic photovoltaics10.1016/j.eurpolymj.2014.01.028 ↗
57. Enhanced organic solar cell stability by polymer (PCPDTBT) side chain functionalization10.1021/cm504391k ↗
58. Toward bulk heterojunction organic solar cells with stable active layer morphology
59. Thermal stability of poly[2-methoxy-5-(2′-phenylethoxy)-1,4-phenylene vinylene] (MPE-PPV):Fullerene bulk heterojunction solar cells10.1021/ma201911a ↗
60. Investigating the role of efficiency enhancing interlayers for bulk heterojunction solar cells by scanning probe microscopy10.1016/j.orgel.2014.02.025 ↗
61. Exploring the origin of high optical absorption in conjugated polymers10.1038/nmat4645 ↗
62. Highly-efficient charge separation and polaron delocalization in polymer-fullerene bulk-heterojunctions: a comparative multi-frequency EPR & DFT study10.1039/c3cp51477c ↗
63. Extremely low dark current, high responsivity, all-polymer photodetectors with spectral response from 300 nm to 1000 nm10.1002/adom.201500224 ↗
64. Green chemistry for organic solar cells10.1039/c3ee41096j ↗