The effects of channel length and film microstructure on the performance of pentacene transistors
Source abstract
Abstract
With the use of the stencil lithography, we fabricated pentacene thin-film transistors pre- pared directly on thermally oxidized silicon gates with channel lengths ranging from 2 to 600 lm. By performing 4-probe measurements or by using the transfer line method on these field-effect transistors, we were able to separate the respective contributions of the channel and the contacts to the transistor performance. The contact resistance depends strongly on the gate voltage and on the grain size and morphology; this behavior has been attributed to screening effects at the contact barriers. The low-field mobility in the channel is 0.5–0.6 cm2/Vs in long-channel transistors and reaches mobility in the order of 10 cm2/ Vs in short-channel transistors consisting essentially of a single grain.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Organic Electronics and Photovoltaics · Thin-Film Transistor Technologies · Nanowire Synthesis and Applications
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (22)
Show source-provided references
1. Correlating the microstructure of thin films of poly[5,5-bis(3-dodecyl-2-thienyl)-2,2-bithiophene] with charge transport: effect of dielectric surface energy and thermal annealing10.1103/PhysRevB.78.125319 ↗
2. Large modulation of carrier transport by grain-boundary molecular packing and microstructure in organic thin films10.1038/nmat2570 ↗
3. From oxide surface to organic transistor properties: the nature and the role of oxide gate surface defects10.1021/jp911167h ↗
4. Materials and applications for large area electronics: solution-based approaches10.1021/cr900150b ↗
5. Progress and challenges in commercialization of organic electronics10.1557/mrs2008.149 ↗
6. Close look at charge carrier injection in polymer field-effect transistors10.1063/1.1613369 ↗
7. Stallinga · 2009
8. Reproducible low contact resistance in rubrene single-crystal field-effect transistors with nickel electrodes
9. Bias-dependent contact resistance in rubrene single-crystal field-effect transistors
10. Quantitative analysis of electronic transport through weakly coupled metal/organic interfaces
11. Device scaling in sub-100nm pentacene field-effect transistors
12. Gated four-probe measurements on pentacene thin-film transistors: contact resistance as a function of gate voltage and temperature10.1063/1.1806533 ↗
13. Film and contact resistance in pentacene thin-film transistors: dependence on film thickness, electrode geometry, and correlation with hole mobility10.1063/1.2197033 ↗
14. Suppression of ambipolar behavior in metallic source/drain metal-oxide-semiconductor field-effect transistors10.1063/1.3266526 ↗
15. Fabrication and application of a full wafer size micro/nanostencil for multiple length-scale surface patterning10.1016/S0167-9317(03)00121-7 ↗
16. Organic thin-film transistors: from theory to real device10.1557/JMR.2004.0266 ↗
17. Ultrathin organic transistors on oxide surfaces10.1088/1367-2630/7/1/133 ↗
18. Controlling charge-transfer at the gate interface of organic field-effect transistors10.1002/pssb.200743439 ↗
19. Top-gate staggered amorphous silicon thin-film transistors: series resistance and nitride thickness effects10.1143/JJAP.37.5914 ↗
20. Nucleation and growth of ultrathin pentacene films on silicon dioxide: effect of deposition rate and substrate temperature10.1016/j.synthmet.2004.08.017 ↗
21. Organic thin-film transistors: the passivation of the dielectric–pentacene interface by dipolar self-assembled monolayers10.1021/la102060u ↗
22. Effect of the phase states of self-assembled monolayers on pentacene growth and thin-film transistor characteristics10.1021/ja800142t ↗