Surface treatment patterning of organic photovoltaic films for low-cost modules
Source abstract
Abstract
Abstract This work describes a patterning technique for the photoactive layer of organic photovoltaic modules. We demonstrate the fabrication of efficient poly[3-(hexyl)thiophene-2,5-diyl]:[6,6]-phenyl-C61-butyric acid methyl ester (P3HT:PCBM) based organic photovoltaic modules through a specific surface treatment, based on the deposition of a fluorinated self assembled monolayer (SAM) on top of the bottom electric contact. Direct self-patterning of the photoactive layer is achieved by the high contact angle between the SAM and the polymer solution, while a smooth topography is created by combining two solvents with different surface tensions and boiling points in the polymer:PCBM solution. The resolution of the patterning is approximately 400 μm for modules based on a conventional cell architecture and 120 μm for an inverted architecture. As a result, we show 25 cm2 P3HT:PCBM based organic photovoltaic modules with 10 series-connected cells, fabricated via roll-to-roll compatible deposition and patterning techniques.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Nanomaterials and Printing Technologies · Nanofabrication and Lithography Techniques · Organic Electronics and Photovoltaics
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (37)
Show source-provided references
1. Solarmer Energy, Inc. http://www.solarmer.com.
2. Press release from Heliatek, http://www.heliatek.com. April 27, 2012.
3. Manufacture, integration and demonstration of polymer solar cells in a lamp for the “Lighting Africa” initiative10.1039/b918441d ↗
4. Product integration of compact roll-to-roll processed polymer solar cell modules: methods and manufacture using flexographic printing, slot-die coating and rotary screen printing10.1039/c0jm01178a ↗
5. Upscaling of polymer solar cell fabrication using full roll-to-roll processing10.1039/b9nr00430k ↗
6. Business, market and intellectual property analysis of polymer solar cells10.1016/j.solmat.2010.04.074 ↗
7. Roll-to-roll fabrication of polymer solar cells10.1016/S1369-7021(12)70019-6 ↗
8. All-spin-coating vacuum-free processed semi-transparent inverted polymer solar cells with PEDOT:PSS anode and PAH-D interfacial layer10.1016/j.orgel.2010.04.012 ↗
9. Airbrush spray-coating of polymer bulk-heterojunction solar cells10.1016/j.solmat.2011.01.047 ↗
10. Spray-coated organic solar cells with large-area of 12.25cm210.1016/j.solmat.2010.10.033 ↗
11. Exploring spray coating as a deposition technique for the fabrication of solution-processed solar cells10.1016/j.solmat.2008.11.052 ↗
12. Flexible, long-lived, large-area, organic solar cells10.1016/j.solmat.2006.10.013 ↗
13. Organic solar cell modules for specific applications – from energy autonomous systems to large area photovoltaics10.1016/j.tsf.2007.12.093 ↗
14. Large-area organic photovoltaic module-Fabrication and performance10.1016/j.solmat.2008.11.018 ↗
15. Investigations on knife and slot die coating and processing of polymer nanoparticle films for hybrid polymer solar cells10.1016/j.cep.2010.11.002 ↗
16. ITO-free flexible inverted organic solar cell modules with high fill factor prepared by slot die coating10.1016/j.solmat.2010.11.025 ↗
17. Printable anodes for flexible organic solar cell modules10.1016/j.tsf.2003.11.038 ↗
18. Gravure printed flexible organic photovoltaic modules10.1016/j.solmat.2010.12.020 ↗
19. Patterning of micro-scale conductive networks using reel-to-reel flexographic printing10.1016/j.tsf.2010.05.125 ↗
20. Polymer–Fullerene bulk-heterojunction solar cells10.1002/adma.200801283 ↗
21. Recent progress in polymer solar cells: manipulation of polymer:fullerene morphology and the formation of efficient inverted polymer solar cells10.1002/adma.200802854 ↗
22. Inverted bulk-heterojunction organic photovoltaic device using a solution-derived ZnO underlayer10.1063/1.2359579 ↗
23. Long-term operational lifetime and degradation analysis of P3HT: PCBM photovoltaic cells10.1016/j.solmat.2010.09.007 ↗
24. Influence of cathode oxidation via the hole extraction layer in polymer: fullerene solar cells10.1016/j.orgel.2011.01.025 ↗
25. Capillary flow as the cause of ring stains from dried liquid drops10.1038/39827 ↗
26. Contact line deposits in an evaporating drop10.1103/PhysRevE.62.756 ↗
27. Evaporation of a sessile droplet on a substrate10.1021/jp0118322 ↗
28. Analysis of the microfluid flow in an evaporating sessile droplet10.1021/la047528s ↗
29. Analysis of the effects of marangoni stresses on the microflow in an evaporating sessile droplet10.1021/la0475270 ↗
30. Marangoni effect reverses coffee-ring depositions10.1021/jp0609232 ↗
31. Spreading and instabilities induced by a solutal marangoni effect10.1021/la971292t ↗
32. Stick–slip behaviour of the liquid drops on an inclined plane: a numerical example
33. Controlled evaporative self-assembly of hierarchically structured regioregular conjugated polymers10.1039/b822998h ↗
34. Pattern formation in drying droplets of polyelectrolyte and salt10.1063/1.3493687 ↗
35. High-performance organic solar cells with spray-coated hole-transport and active layers10.1002/adfm.201001562 ↗
36. High photovoltaic performance of inkjet printed polymer: fullerene blends10.1002/adma.200700911 ↗
37. Electrode considerations for the optical enhancement of organic bulk heterojunction solar cells10.1002/aenm.201100250 ↗