journal article·2019-01

Work-function-controlled operation mode transition between photodiode and photoconductor modes in organic photodetectors

Tiening Wang, Yue Wang, Lijie Zhu, Longfeng Lv, Yufeng Hu, Zhenbo Deng, Qiuhong Cui, Zhidong Lou, Yanbing Hou, Feng Teng

Publisher page

Abstract

Abstract The organic photodetectors (OPDs) can be proposed in two different ways: a photodiode system or a photoconductor type, where the external quantum efficiency (EQE) cannot exceed 100% in the former one but it can in the latter one. Whether the electrode-active layer contacts can inject at least one kind of carriers is the critical factor to determine the specific photodetector type. Therefore, the role of electrode/semiconductor contacts in the OPDs needs to be fully understood. In this work, we demonstrate the high performance OPDs based on PTB7:PC71BM bulk heterojunction with the different top metal electrodes (Ag, Au, Al) by incorporating the PFN modified ITO electrode. Ultraviolet photoelectron spectroscopy shows that the work function of ITO is effectively reduced from 4.7 eV to 4.1 eV due to the PFN dipole layer. Combined with current density-voltage characteristics and the EQE, the results indicate the devices show different working modes: a photodiode or photoconductor type OPDs. For the Ag or Au electrode device, the photogenerated charges can rapidly transport to the corresponding electrodes and then to be collected under reverse bias, which meets the photodiode type. However, the Al electrode device with more than 100% EQE presents the photoconductor mode, which is contributed to that the photogenerated charges accumulate around the interface between the PFN layer and the active layer, and then create a tunneling charge injection under reverse bias. Although both the proposed photodiode and photoconductor devices exhibit large signal-to-noise ratio (104∼105), fast response (∼μs), and low working voltage (−0.5 V), these two type devices show their unique strengths due to the different working modes. The photodiode devices have higher detectivity (more than 1013 Jones) and broader linear dynamic range (over 120 dB), while the photoconductor ones possess more than 100% EQE and the better responsivity (0.56 A/W). This work may pave a way to obtain the desirable working mode of the photodetectors by simply tuning the electrode work function.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Organic Electronics and Photovoltaics · Conducting polymers and applications · Semiconductor materials and interfaces

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (47)

Show source-provided references
1. Third-generation infrared photodetector arrays10.1063/1.3099572 ↗
2. Organic light detectors: photodiodes and phototransistors10.1002/adma.201204979 ↗
3. In vivo cancer targeting and imaging with semiconductor quantum dots10.1038/nbt994 ↗
4. Solution-processed semiconductors for next-generation photodetectors10.1038/natrevmats.2016.100 ↗
5. Fully inkjet-printed organic photodetectors with high quantum yield10.1002/adma.201303473 ↗
6. Recent progress in materials and devices toward printable and flexible sensors10.1002/adma.201505118 ↗
7. An overview of the development of flexible sensors10.1002/adma.201700375 ↗
8. High-performance all-polymer photoresponse devices based on acceptor–acceptor conjugated polymers10.1002/adfm.201601745 ↗
9. Polymer:Fullerene bimolecular crystals for near-infrared spectroscopic photodetectors10.1002/adma.201702184 ↗
10. Narrowband light detection via internal quantum efficiency manipulation of organic photodiodes10.1038/ncomms7343 ↗
11. Toward highly sensitive polymer photodetectors by molecular engineering10.1002/adma.201502267 ↗
12. Trap engineering of CdTe nanoparticle for high gain, fast response, and low noise P3HT:CdTe nanocomposite photodetectors10.1002/adma.201502292 ↗
13. A filterless, visible-blind, narrow-band, and near-infrared photodetector with a gain10.1039/C6NR02902G ↗
14. Improving the sensitivity of a near-infrared nanocomposite photodetector by enhancing trap induced hole injection10.1063/1.4905930 ↗
15. Highly sensitive organic photodetectors with tunable spectral response under Bi-directional bias10.1002/adom.201600387 ↗
16. Simultaneous enhancement of open-circuit voltage, short-circuit current density, and fill factor in polymer solar cells10.1002/adma.201103006 ↗
17. A nanocomposite ultraviolet photodetector based on interfacial trap-controlled charge injection10.1038/nnano.2012.187 ↗
18. A highly sensitive narrowband nanocomposite photodetector with gain10.1002/adma.201503774 ↗
19. High sensitivity and fast response solution processed polymer photodetectors with polyethylenimine ethoxylated (PEIE) modified ITO electrode10.1364/OE.25.007719 ↗
20. Solution processed organic photodetector utilizing an interdiffused polymer/fullerene bilayer10.1364/OE.23.00A936 ↗
21. Inverted polymer solar cells integrated with a low temperature-annealed sol-gel-derived ZnO film as an electron transport layer10.1002/adma.201004301 ↗
22. Interfacial modification to improve inverted polymer solar cells10.1039/b808004f ↗
23. Effect of LiF/metal electrodes on the performance of plastic solar cells10.1063/1.1446988 ↗
24. Inverted polymer solar cells with a solution-processed cesium halide interlayer10.1016/j.orgel.2012.10.020 ↗
25. Low-work-function surface formed by solution-processed and thermally deposited nanoscale layers of cesium carbonate10.1002/adfm.200700051 ↗
26. Recent advances in polymer solar cells: realization of high device performance by incorporating water/alcohol soluble conjugated polymers as electrode buffer layer10.1002/adma.201303391 ↗
27. Enhanced power-conversion efficiency in polymer solar cells using an inverted device structure10.1038/nphoton.2012.190 ↗
28. Single-junction polymer solar cells with high efficiency and photovoltage10.1038/nphoton.2015.6 ↗
29. High sensitivity, fast response and low operating voltage organic photodetectors by incorporating a water/alcohol soluble conjugated polymer anode buffer layer10.1039/C6RA26750E ↗
30. Computational comparison of conventional and inverted organic photovoltaic performance parameters with varying metal electrode surface workfunction10.1016/j.solmat.2013.09.041 ↗
31. Solution-processed near-infrared polymer photodetectors with an inverted device structure10.1016/j.orgel.2012.08.017 ↗
32. Cathode dependence of the open-circuit voltage of polymer:fullerene bulk heterojunction solar cells10.1063/1.1620683 ↗
33. Optimal negative electrodes for poly(3-hexylthiophene): [6,6]-phenyl C61-butyric acid methyl ester bulk heterojunction photovoltaic devices10.1063/1.2841067 ↗
34. Optimization of active layer and anode electrode for high-performance inverted bulk-heterojunction solar cells10.1109/JSTQE.2010.2047098 ↗
35. Ultrasensitivity broadband photodetectors based on perovskite: research on film crystallization and electrode optimization10.1016/j.orgel.2017.03.023 ↗
36. Transparent and highly responsive phototransistors based on a solution-processed, nanometers-thick active layer, embedding a high-mobility electron-transporting polymer and a hole-trapping molecule10.1021/acsami.7b05259 ↗
37. Perovskite/polymer hybrid thin films for high external quantum efficiency photodetectors with wide spectral response from visible to near-infrared wavelengths10.1002/adom.201700213 ↗
38. Comparison of the operation of polymer/fullerene, polymer/polymer, and polymer/nanocrystal solar cells: a transient photocurrent and photovoltage study10.1002/adfm.201002154 ↗
39. Measurement of charge-density dependence of Carrier mobility in an organic semiconductor blend10.1002/adfm.200901734 ↗
40. Investigation of driving forces for charge extraction in organic solar cells: transient photocurrent measurements on solar cells showing S-shaped current–voltage characteristics10.1002/aenm.201200931 ↗
41. High-efficiency polymer photovoltaic cells using a solution-processable insulating interfacial nanolayer: the role of the insulating nanolayer10.1039/c2jm35016e ↗
42. Dielectric interface effects on surface charge accumulation and collection towards high-efficiency organic solar cells10.1063/1.4871466 ↗
43. High-detectivity polymer photodetectors with spectral response from 300 nm to 1450 nm10.1126/science.1176706 ↗
44. High sensitivity polymer visible-near infrared photodetectors via an inverted device structure and manipulation of injection barrier height10.1002/smll.201600721 ↗
45. High-performance, fullerene-free organic photodiodes based on a solution-processable indigo10.1002/adma.201502936 ↗
46. High-responsivity solution-processed organic–inorganic hybrid bilayer thin film photoconductors10.1039/c3tc31143k ↗
47. Solution-processable all-small molecular bulk heterojunction films for stable organic photodetectors: near UV and visible light sensing10.1039/C4TC02194K ↗