Towards efficient perovskite light-emitting diodes: A multi-step spin-coating method for a dense and uniform perovskite film
Source abstract
Abstract
Abstract Although organometal halide perovskites are emerging as emitters with extremely high color purity and low cost, device performances are significantly restricted by poor morphology of the perovskite layer. In this work, a multi-step spin-coating method is used to prepare CH3NH3PbBr3 perovskite layer, which a dense and uniform perovskite film with small grain sizes and a ∼100% coverage. Moreover, the component of the hole injection layer poly(3,4-ethylenedioxythio- phene):poly(4-styrenesulphonate) (PEDOT:PSS) adjusted with PSS is applied to reduce the injection barrier between PEDOT:PSS and perovskite layer. With above-mentioned approaches, efficient perovskite light-emitting diodes with maximum luminance and current efficiency of 9900 cd m−2 and 2.6 cd A−1 are eventually acquired.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Perovskite Materials and Applications · Organic Light-Emitting Diodes Research · Conducting polymers and applications
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (44)
Show source-provided references
1. Iodide management in formamidinium-lead-halide-based perovskite layers for efficient solar cells10.1126/science.aan2301 ↗
2. Multicolored organic/inorganic hybrid perovskite light-emitting diodes10.1002/adma.201403751 ↗
3. Improving the stability and performance of perovskite light-emitting diodes by thermal annealing treatment10.1002/adma.201601105 ↗
4. Cross-linkable hole-transport materials improve the device performance of perovskite light-emitting diodes10.1021/acsami.6b08106 ↗
5. Perovskite materials for light-emitting diodes and lasers10.1002/adma.201600669 ↗
6. Perovskite luminescent materials
7. Organic-inorganic heterostructure electroluminescent device using a layered perovskite semiconductor (C6H5C2H4NH3)2PbI410.1063/1.112265 ↗
8. Bright light-emitting diodes based on organometal halide perovskite10.1038/nnano.2014.149 ↗
9. NiOx electrode interlayer and CH3NH2/CH3NH3PbBr3 interface treatment to markedly advance hybrid perovskite-based light-emitting diodes10.1002/adma.201602974 ↗
10. Broadly tunable metal halide perovskites for solid-state light-emission applications10.1016/j.mattod.2017.03.021 ↗
11. Overcoming the electroluminescence efficiency limitations of perovskite light-emitting diodes10.1126/science.aad1818 ↗
12. Pure formamidinium-based perovskite light-emitting diodes with high efficiency and low driving voltage10.1002/adma.201603826 ↗
13. Fully vapor-deposited heterostructured light-emitting diode based on organo-metal halide perovskite10.1002/aelm.201500325 ↗
14. Enhanced coverage of all-inorganic perovskite CsPbBr3 through sequential deposition for green light-emitting diodes10.1002/ente.201700475 ↗
15. High-performance perovskite light-emitting diodes via morphological control of perovskite films10.1039/C5NR05604G ↗
16. High quality hybrid perovskite semiconductor thin films with remarkably enhanced luminescence and defect suppression via quaternary alkyl ammonium salt based treatment10.1002/admi.201700562 ↗
17. Combined optimization of emission layer morphology and hole-transport layer for enhanced performance of perovskite light-emitting diodes10.1039/C7TC01155E ↗
18. Stretchable light-emitting diodes with organometal-halide-perovskite-polymer composite emitters10.1002/adma.201607053 ↗
19. Fully printed halide perovskite light-emitting diodes with silver nanowire electrodes10.1021/acsnano.5b07506 ↗
20. Single-layer halide perovskite light-emitting diodes with sub-band gap turn-on voltage and high brightness10.1021/acs.jpclett.6b01942 ↗
21. Efficient perovskite light-emitting diodes by film annealing temperature control
22. Effect of the solvent used for fabrication of perovskite films by solvent dropping on performance of perovskite light-emitting diodes10.1039/C6NR08158D ↗
23. In situ preparation of metal halide perovskite nanocrystal thin films for improved light-emitting devices10.1021/acsnano.7b00404 ↗
24. Single-layer light-emitting diodes using organometal halide perovskite/poly(ethylene oxide) composite thin films10.1002/adma.201502490 ↗
25. Organometal halide perovskite quantum dot light-emitting diodes10.1002/adfm.201601054 ↗
26. In situ fabrication of highly luminescent bifunctional amino acid crosslinked 2D/3D NH3C4H9COO(CH3NH3PbBr3)n perovskite films
27. Amine-based passivating materials for enhanced optical properties and performance of organic-inorganic perovskites in light-emitting diodes10.1021/acs.jpclett.7b00372 ↗
28. Color-pure violet-light-emitting diodes based on layered lead halide perovskite nanoplates10.1021/acsnano.6b02683 ↗
29. Highly efficient perovskite light-emitting diodes incorporating full film coverage and bipolar charge injection10.1021/acs.jpclett.7b00368 ↗
30. Microstructures and photovoltaic properties of perovskite-type CH3NH3PbI3 compounds
31. DMF as an additive in a two-step spin-coating method for 20% conversion efficiency in perovskite solar cells
32. Morphology engineering for high-performance and multicolored perovskite light-emitting diodes with simple device structures10.1002/smll.201601785 ↗
33. Chemical management for colorful, efficient, and stable inorganic-organic hybrid nanostructured solar cells10.1021/nl400349b ↗
34. Enhancing the brightness of cesium lead halide perovskite nanocrystal based green light-emitting devices through the interface engineering with perfluorinated ionomer10.1021/acs.nanolett.5b04959 ↗
35. Transformative evolution of organolead triiodide perovskite thin films from strong room-temperature solid-gas interaction between HPbI3-CH3NH2 precursor pair10.1021/jacs.5b11824 ↗
36. Methylamine-gas-induced defect-healing behavior of CH3NH3PbI3 thin films for perovskite solar cells10.1002/anie.201504379 ↗
37. Enhanced performance in fluorene-free organometal halide perovskite light-emitting diodes using tunable, low electron affinity oxide electron injectors10.1002/adma.201405044 ↗
38. Near infrared to visible electroluminescent diodes based on organometallic halide perovskites: structural and optical investigation10.1021/acsphotonics.5b00018 ↗
39. Interfacial control toward efficient and low-voltage perovskite light-emitting diodes10.1002/adma.201405217 ↗
40. Spectroscopic study on sputtered PEDOT·PSS: role of surface PSS layer10.1016/j.orgel.2006.04.005 ↗
41. Control of the surface composition of a conducting-polymer complex film to tune the work function10.1002/adfm.200700766 ↗
42. Characterization of the PEDOT-PSS system by means of X-ray and ultraviolet photoelectron spectroscopy10.1016/S0040-6090(99)00422-8 ↗
43. Structure and electronic properties of poly(3,4-ethylenedioxy- thiophene)poly(styrenesulfonate) prepared under ultrasonic irradiation10.1016/j.synthmet.2014.07.001 ↗
44. Modified PEDOT layer makes a 1.52 V Voc for perovskite/PCBM solar cells