An insight into the air stability of the benchmark polymer:fullerene photovoltaic films and devices: A comparative study
Source abstract
Abstract
Abstract In this study, a comparative analysis of the instabilities and degradation routes of organic solar cell (OSCs) employing the three benchmarked donor polymers namely poly(3-hexylthiophene) (P3HT), poly[N-900- hepta-decanyl-2,7-carbazole-alt-5,5-(40,70-di-2-thienyl-20,10,30-benzothiadiazole)] (PCDTBT) and Poly[[4,8-bis[(2-ethylhexyl)oxy]benzo[1,2- b:4,5-b']dithiophene-2,6-diyl][3-fluoro-2-[(2 ethylhexyl)carbonyl] thieno[3,4-b]thiophenediyl]] (PTB7) along with [6,6]-phenylC71 butyric acid methyl-ester (PC71BM) acceptor have been conducted using the extracted photovoltaic parameters in conjunction with the X-ray photoelectron spectroscopy (XPS), optical and morphological analysis. During the 14 days air stability test, the power conversion efficiency (PCE) decreased by 78.85%, 65.83% and 83.36% for P3HT:PC71BM, PCDTBT:PC71BM and PTB7:PC71BM based devices, respectively. However, the degradation study of the bulk heterojunction (BHJ) films was prolonged to 28 days in order to further elucidate the degradation factors affecting the device performance. XPS, optical and morphological studies enabled detailed information on the device degradation mechanisms and confirmed the oxidation of photoactive layer after ageing, morphological deterioration and fall in absorbance, particularly, the PTB7:PC71BM blend that showed the rapid degradation among all three. The results obtained in the current study advance the understanding of the stability/degradation mechanisms pertaining to the three most commonly used BHJ materials and hence, will help to improve the OSCs for longer lifetime.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Organic Electronics and Photovoltaics · Conducting polymers and applications · Semiconductor materials and interfaces
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (65)
Show source-provided references
1. Plastic solar cells10.1002/1616-3028(200102)11:1<15::AID-ADFM15>3.0.CO;2-A ↗
2. Organic tandem solar cells: a review10.1039/b817952b ↗
3. Polymer–fullerene composite solar cells10.1002/anie.200702506 ↗
4. A low cost and high performance polymer donor material for polymer solar cells10.1038/s41467-018-03207-x ↗
5. Single-junction polymer solar cells with over 10% efficiency by a novel two-dimensional donor–acceptor conjugated copolymer10.1021/am509047g ↗
6. Rohr · 2013
7. Efficient organic solar cells processed from hydrocarbon solvents10.1038/nenergy.2015.27 ↗
8. Breaking the 10% efficiency barrier in organic photovoltaics: morphology and device optimization of well‐known PBDTTT polymers10.1002/aenm.201502529 ↗
9. Organic solar cells based on non-fullerene acceptors10.1038/nmat5063 ↗
10. Degradation patterns in water and oxygen of an inverted polymer solar cell10.1021/ja106299g ↗
11. High efficiency P3HT: PCBM solar cells with an inserted PCBM layer10.1039/c4tc00003j ↗
12. High-efficiency and air-stable P3HT-based polymer solar cells with a new non-fullerene acceptor10.1038/ncomms11585 ↗
13. Significantly improved photovoltaic performance in polymer bulk heterojunction solar cells with graphene oxide/PEDOT: PSS double decked hole transport layer10.1038/srep39555 ↗
14. Ultrafast exciton dissociation followed by nongeminate charge recombination in PCDTBT: PCBM photovoltaic blends10.1021/ja201837e ↗
15. Exciton formation, relaxation, and decay in PCDTBT10.1021/ja105290e ↗
16. Charge carrier mobility of the organic photovoltaic materials PTB7 and PC71BM and its influence on device performance10.1016/j.orgel.2015.03.013 ↗
17. Inverted vs standard PTB7: PC70BM organic photovoltaic devices. The benefit of highly selective and extracting contacts in device performance10.1016/j.orgel.2014.08.008 ↗
18. Efficient solar cells are more stable: the impact of polymer molecular weight on performance of organic photovoltaics10.1039/C6TA00721J ↗
19. XPS analysis of the chemical degradation of PTB7 polymers for organic photovoltaics10.1016/j.orgel.2016.10.016 ↗
20. Improve the operational stability of the inverted organic solar cells using bilayer metal oxide structure10.1021/am504654m ↗
21. Incorporating an electrode modification layer with a vertical phase separated photoactive layer for efficient and stable inverted nonfullerene polymer solar cells10.1021/acsami.7b13494 ↗
22. Highly efficient polymer solar cells cast from non-halogenated xylene/anisaldehyde solution10.1039/C5EE01917F ↗
23. Absolute measurement of domain composition and nanoscale size distribution explains performance in PTB7: PC71BM solar cells10.1002/aenm.201200377 ↗
24. For the bright future—bulk heterojunction polymer solar cells with power conversion efficiency of 7.4%10.1002/adma.200903528 ↗
25. Understanding the morphology of PTB7: PCBM blends in organic photovoltaics10.1002/aenm.201301377 ↗
26. Chemical changes in PCPDTBT: PCBM solar cells using XPS and TOF-SIMS and use of inverted device structure for improving lifetime performance10.1016/j.solmat.2015.05.016 ↗
27. Stability comparison: a PCDTBT/PC71BM bulk-heterojunction versus a P3HT/PC71BM bulk-heterojunction10.1016/j.solmat.2012.02.005 ↗
28. A thermally stable semiconducting polymer10.1002/adma.200903420 ↗
29. Layer by layer characterisation of the degradation process in PCDTBT: PC71BM based normal architecture polymer solar cells10.1016/j.orgel.2016.10.029 ↗
30. Beamson · 1992
31. Holey reduced graphene oxide nanosheets for high performance room temperature gas sensing10.1039/C4TA03740E ↗
32. Coherent nanoscale cobalt/cobalt oxide heterostructures embedded in porous carbon for the oxygen reduction reaction10.1039/C8RA04256J ↗
33. Evolution of electrical, chemical, and structural properties of transparent and conducting chemically derived graphene thin films10.1002/adfm.200900166 ↗
34. The production of graphene nanosheets decorated with silver nanoparticles for use in transparent, conductive films10.1016/j.carbon.2010.12.022 ↗
35. Significant stability enhancement in high‐efficiency polymer: fullerene bulk heterojunction solar cells by blocking ultraviolet photons from solar light10.1002/advs.201500269 ↗
36. Toward improved environmental stability of polymer: fullerene and polymer: nonfullerene organic solar cells: a common energetic origin of light-and oxygen-induced degradation10.1021/acsenergylett.9b00109 ↗
37. Water and oxygen induced degradation of small molecule organic solar cells10.1016/j.solmat.2011.01.001 ↗
38. High performance organic photovoltaics with zinc oxide and graphene oxide buffer layers10.1039/C3NR04709A ↗
39. Mittal · 2004
40. Electropolymerized molecularly imprinted polypyrrole film for sensing of clofibric acid10.3390/s150304870 ↗
41. Comparison between metal ion and polyelectrolyte functionalization for electrophoretic deposition of graphene nanosheet films10.1039/c2ra20948a ↗
42. Synthesis, characterization and catalytic activity of gold nanoparticles biosynthesized with Rhizopus oryzae protein extract10.1039/c2gc16676c ↗
43. High-efficiency solution processable polymer photovoltaic cells by self-organization of polymer blends
44. Photo-degradation and stabilization effects in operating organic photovoltaic devices by joint photo-current and morphological monitoring10.1016/j.solmat.2008.02.019 ↗
45. The critical role of processing and morphology in determining degradation rates in polymer solar cells10.1002/aenm.201000030 ↗
46. Water-induced degradation of polymer solar cells studied by H218O labeling10.1021/am800039w ↗
47. The effect of post-processing treatments on inflection points in current–voltage curves of roll-to-roll processed polymer photovoltaics10.1016/j.solmat.2010.06.007 ↗
48. Efficiency limiting factors of organic bulk heterojunction solar cells identified by electrical impedance spectroscopy10.1016/j.solmat.2006.10.020 ↗
49. Photochemical stability of high efficiency PTB7: PC 70 BM solar cell blends10.1039/C4TA05641H ↗
50. Influence of traces of oxidized polymer on the performances of bulk heterojunction solar cells10.1039/C9QM00191C ↗
51. Relating polymer chemical structure to the stability of polymer: fullerene solar cells10.1039/C7TC01455D ↗
52. Compatibility of PTB7 and [70] PCBM as a key factor for the stability of PTB7:[70] PCBM solar cells10.1002/aenm.201502338 ↗
53. The role of fullerenes in the environmental stability of polymer:fullerene solar cells10.1039/C7EE02983G ↗
54. Correlating triplet yield, singlet oxygen generation and photochemical stability in polymer/fullerene blend films10.1039/c2cc38243a ↗
55. Degradation analysis of PCDTBT: PC71BM organic solar cells-an insight10.1016/j.cap.2015.12.007 ↗
56. Fundamentals of bulk heterojunction organic solar cells: an overview of stability/degradation issues and strategies for improvement10.1016/j.rser.2017.12.008 ↗
57. Understanding the origin of the S-curve in conjugated polymer/fullerene photovoltaics from drift-diffusion simulations10.1063/1.4817396 ↗
58. Degradation of organic solar cells due to air exposure10.1016/j.solmat.2006.06.041 ↗
59. Luminescence imaging of polymer solar cells: visualization of progressing degradation10.1063/1.3553864 ↗
60. Lifetimes of organic photovoltaics: using TOF-SIMS and 18O2 isotopic labelling to characterise chemical degradation mechanisms10.1016/j.solmat.2005.03.004 ↗
61. Photoinduced degradation of polymer and polymer–fullerene active layers: experiment and theory10.1002/adfm.201001079 ↗
62. Oxygen doping of P3HT: PCBM blends: influence on trap states, charge carrier mobility and solar cell performance10.1016/j.orgel.2010.07.016 ↗
63. Reversible and irreversible degradation of organic solar cell performance by oxygen10.1016/j.solener.2010.09.007 ↗
64. Oxygen-induced degradation in C60-based organic solar cells: relation between film properties and device performance10.1021/acsami.5b11749 ↗
65. Optical absorption study of P3HT: PCBM blend photo-oxidation for bulk heterojunction solar cells10.1016/j.solener.2016.05.009 ↗