journal article·2019-09

An universal electron transport layer involving hydrogen plasma–treated tungsten disulfide nanosheets doped zinc oxide layers for polymer donors with fullerene or small molecule acceptor photovoltaics

Yi-Jiun Huang, Po-Jen Yen, Hao-Cheng Wang, Hsiu-Cheng Chen, Kung-Hwa Wei

Publisher page

Abstract

Abstract A new universal electron transport layer that involves doping hydrogen-plasma-treated tungsten disulfide (WS2) nanosheets into ZnO for polymer/fullerene or small molecule organic photovoltaics (OPVs) was prepared. A hydrogen plasma treatment was used to alter the structures of WS2 nanosheets such that the W6+ content was converted into W4+; then ZnO:WS2 nanosheets composites were prepared to form electron transport layers (ETLs). The energy band of the ZnO:WS2 films could be tuned from 5.15 to 4.60 eV by varying the concentration of the WS2 nanosheets up to 0.5 wt%. It was found that ZnO:WS2 ETLs exhibited superior charge transport properties than those of the pristine ZnO layer because of the structure changes, as determined from the X-ray scattering characterizations. OPVs incorporating active layers of PTB7-TH/PC71BM and PTB7-TH/IDIC blends exhibited their power conversion efficiencies of 10.3% and 6.7%, respectively, with the incorporation of 0.3 wt% of the WS2 nanosheets, up from 8.9% to 5.4% for the corresponding devices featuring pristine ZnO—relative increases of 16% and 24%, respectively. This study demonstrates the effectiveness of hydrogen plasma treatment for altering the surface structures of two-dimensional transition-metal-dichalcogenide nanosheets, and paves a way for the composite electron transport layers for use in organic photovoltaics.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: 2D Materials and Applications · Perovskite Materials and Applications · Conducting polymers and applications

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (73)

Show source-provided references
1. Properties of interlayer for organic photovoltaics10.1016/j.mattod.2013.10.001 ↗
2. Organic photovoltaics10.1016/S1369-7021(13)70013-0 ↗
3. Energy transfer within small molecule/conjugated polymer blends enhances photovoltaic efficiency10.1039/C7TA04144F ↗
4. Measurement of the charge carrier mobility distribution in bulk heterojunction solar cells10.1002/adma.201500416 ↗
5. Improving device efficiency of polymer/fullerene bulk heterojunction solar cells through enhanced crystallinity and reduced grain boundaries induced by solvent additives10.1002/adma.201101274 ↗
6. Simplified tandem polymer solar cells with an ideal self-organized recombination layer10.1002/adma.201404765 ↗
7. Molecular lock: a versatile key to enhance efficiency and stability of organic solar cells10.1002/adma.201600426 ↗
8. Block copolymer-tuned fullerene electron transport layer enhances the efficiency of perovskite photovoltaics10.1021/acsami.6b07690 ↗
9. Interface modification of ZnO-based inverted PTB7:PC71BM organic solar cells by cesium stearate and simultaneous enhancement of device parameters10.1021/sc5001447 ↗
10. Crosslinkable amino-functionalized conjugated polymer as cathode interlayer for efficient inverted polymer solar cells10.1002/aenm.201670065 ↗
11. ZnO cathode buffer layers for inverted polymer solar cells10.1039/C5EE02510A ↗
12. Effects of DIO on the charge recombination behaviors of PTB7:PC71BM photovoltaics
13. High-performance polymer solar cells with PCE of 10.42% via Al-doped ZnO cathode interlayer10.1002/adma.201601814 ↗
14. Multiple electron transporting layers and their excellent properties based on organic solar cell10.1038/s41598-017-08613-7 ↗
15. Decreased charge transport barrier and recombination of organic solar cells by constructing interfacial nanojunction with annealing-free ZnO and Al layers10.1021/acsami.7b06235 ↗
16. Enhanced performance and stability of polymer solar cells by in situ formed AlOx passivation and doping10.1021/acs.jpcc.6b12459 ↗
17. Polymer solar cells with 90% external quantum efficiency featuring an ideal light- and charge-manipulation layer10.1002/adma.201706083 ↗
18. Low-temperature solution-processed zinc tin oxide film as a cathode interlayer for organic solar cells10.1021/acsami.6b13724 ↗
19. Fullerene derivative-doped zinc oxide nanofilm as the cathode of inverted polymer solar cells with low-bandgap polymer (PTB7-Th) for high performance10.1002/adma.201301476 ↗
20. Single junction inverted polymer solar cell reaching power conversion efficiency 10.31% by employing dual-doped zinc oxide nano-film as cathode interlayer10.1038/srep06813 ↗
21. Directed vertical diffusion of photovoltaic active layer components into porous ZnO-based cathode buffer layers10.1002/smll.201704310 ↗
22. Self-doping fullerene electrolyte-based electron transport layer for all-room-temperature-processed high-performance flexible polymer solar cells
23. Fullerene-free organic solar cells with efficiency over 12% based on EDTA-zno hybrid cathode interlayer10.1021/acs.chemmater.7b01615 ↗
24. A homogeneous ethanedithiol doped ZnO electron transporting layer for polymer solar cells10.1039/C6TC02369J ↗
25. Polyelectrolyte interlayers with a broad processing window for high efficiency inverted organic solar cells towards mass production10.1039/C8TA05992F ↗
26. Embedding a diketopyrrolopyrrole-based cross-linking interfacial layer enhances the performance of organic photovoltaics10.1021/acsami.7b17715 ↗
27. Aqueous solution processed photoconductive cathode interlayer for high performance polymer solar cells with thick interlayer and thick active layer10.1002/adma.201601615 ↗
28. 11% efficient ternary organic solar cells with high composition tolerance via integrated near-IR sensitization and interface engineering10.1002/adma.201602834 ↗
29. Photoconductive cathode interlayer for highly efficient inverted polymer solar cells10.1021/jacs.5b02168 ↗
30. 11% organic photovoltaic devices based on PTB7-Th: PC71BM photoactive layers and irradiation-assisted ZnO electron transport layers10.1002/advs.201700858 ↗
31. Solution-processed zinc oxide/polyethylenimine nanocomposites as tunable electron transport layers for highly efficient bulk heterojunction polymer solar cells10.1021/acsami.5b00521 ↗
32. Solution processed hybrid graphene-moo3 hole transport layers for improved performance of organic solar cells
33. Reduction of charge-carrier recombination at ZnO-polymer blend interfaces in PTB7-based bulk heterojunction solar cells using regular device structure: impact of ZnO nanoparticle size and surfactant10.1021/acsami.7b01361 ↗
34. Synthesis of uniform single layer WS2 for tunable photoluminescence10.1038/s41598-017-16251-2 ↗
35. Simple structured polyetheramines, Jeffamines, as efficient cathode interfacial layers for organic photovoltaics providing power conversion efficiencies up to 9.1%10.1039/C7TA02954C ↗
36. Two-dimensional nanosheets produced by liquid exfoliation of layered materials10.1126/science.1194975 ↗
37. High-mobility and high-optical quality atomically thin WS210.1038/s41598-017-14928-2 ↗
38. Optical properties of 2D semiconductor WS210.1002/adom.201700767 ↗
39. Nguyen · 2019
40. Band offsets and heterostructures of two-dimensional semiconductors10.1063/1.4774090 ↗
41. High quantity and quality few-layers transition metal disulfide nanosheets from wet-milling exfoliation10.1039/c3ra41744a ↗
42. UV/ozone-treated WS2 hole-extraction layer in organic photovoltaic cells10.1002/pssr.201409165 ↗
43. PEDOT:PSS-Assisted exfoliation and functionalization of 2D nanosheets for high-performance organic solar cells10.1002/adfm.201701622 ↗
44. Water-soluble 2D transition metal dichalcogenides as the hole-transport layer for highly efficient and stable p-i-n perovskite solar cells10.1021/acsami.7b06403 ↗
45. Performances of liquid-exfoliated transition metal dichalcogenides as hole injection layers in organic light-emitting diodes10.1002/adfm.201501333 ↗
46. Significant exciton brightening in monolayer tungsten disulfides via fluorination: n-type gas sensing semiconductors10.1002/adfm.201602647 ↗
47. Bilayer heterostructured PThTPTI/WS2 photodetectors with high thermal stability in ambient environment10.1021/acsami.6b12090 ↗
48. Hierarchical architecture of WS2 nanosheets on graphene frameworks with enhanced electrochemical properties for lithium storage and hydrogen evolution10.1039/C5TA06840A ↗
49. Reactive plasmas as a versatile nanofabrication tool10.1103/RevModPhys.77.489 ↗
50. Energy and matter-efficient size-selective growth of thin quantum wires in a plasma10.1063/1.3540645 ↗
51. Recent progress in plasma-assisted synthesis and modification of 2D materials10.1088/2053-1583/aabb81 ↗
52. Activating basal-plane catalytic activity of two-dimensional MoS2 monolayer with remote hydrogen plasma10.1016/j.nanoen.2016.09.010 ↗
53. Janus monolayers of transition metal dichalcogenides10.1038/nnano.2017.100 ↗
54. Production of few-layer MoS2 nanosheets through exfoliation of liquid N2 –quenched bulk MoS210.1039/C4RA00297K ↗
55. Fluorene conjugated polymer/nickel oxide nanocomposite hole transport layer enhances the efficiency of organic photovoltaic devices10.1021/acsami.6b10508 ↗
56. Strain-induced phonon shifts in tungsten disulfide nanoplatelets and nanotubes
57. Characterization of WO3thin films grown on silicon by HFMOD10.1155/2013/591787 ↗
58. Synthesis of large-area WS 2 monolayers with exceptional photoluminescence10.1038/srep19159 ↗
59. E.Engineering
60. Photoelectrolysis and physical properties of the semiconducting electrode WO210.1063/1.323948 ↗
61. Review and test of methods for determination of the solar cell series resistance10.1016/0960-1481(94)E0021-V ↗
62. Enhancing photovoltaic performance by tuning the domain sizes of a small-molecule acceptor by side-chain-engineered polymer donors10.1039/C8TA11059J ↗
63. Doping ZnO electron transport layers with MoS2 nanosheets enhances the efficiency of polymer solar cells10.1021/acsami.8b06413 ↗
64. Guo · 2017 · 1
65. Environ · 2012 · 8208
66. Interplay of optical, morphological, and electronic effects of ZnO optical spacers in highly efficient polymer solar cells
67. Photoluminescence and electron paramagnetic resonance of ZnO tetrapod structures10.1002/adfm.200305082 ↗
68. Metal–organic-compound-modified MoS2 with enhanced solubility for high-performance perovskite solar cells10.1002/cssc.201700603 ↗
69. A two-step strategy to clarify the roles of a solution processed PFN interfacial layer in highly efficient polymer solar cells10.1039/C5TA05117G ↗
70. The active layer morphology of organic solar cells probed with grazing incidence scattering techniques10.1002/adma.201304187 ↗
71. Jood · 2011 · 4337
72. Space-confined growth of Ag3PO4 nanoparticles within WS2 sheets: Ag3PO4/WS2 composites as visible-light-driven photocatalysts for decomposing dyes10.1039/C5TA04422G ↗
73. Evolving molecular architectures of donor–acceptor conjugated polymers for photovoltaic applications: from one-dimensional to branched to two-dimensional structures10.1039/C7TA07228G ↗