Influence of solvent additives on the morphology and electrical properties of diF-TES ADT organic field-effect transistors
Source abstract
Abstract
Abstract Solution processing of organic semiconductors offers key advantages, including low-cost and compatibility with large-area flexible substrates. Controlling film crystallization from solution, however, is not trivial. This is particularly important since the device properties are highly dependent on the film microstructure, which, in turn, can vary significantly with processing. In this work, we tuned the small molecule organic semiconductor film microstructure by using a binary solvent consisting of a host solvent and a high-boiling point solvent additive and studied the effect of additive content on charge transport. Spin coated 2,8-difluoro-5,11-bis(triethylsilylethynyl)anthradithiophene films processed from a mixture of chlorobenzene and dichlorobenzene, in various ratios, were investigated by using Polarized Optical Microscopy, Scanning Electron Microscopy and Atomic Force Microscopy analysis and their electrical properties were evaluated from bottom-contact bottom-gate organic field-effect transistors. We found that the mobility increased by three times for a 8% dichlorobenzene content as a result of reducing the density of the grain boundaries within the device channel.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Organic Electronics and Photovoltaics · Organic Light-Emitting Diodes Research · Thin-Film Transistor Technologies
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (53)
Show source-provided references
1. Materials and applications for large area electronics: solution-based approaches10.1021/cr900150b ↗
2. Device physics of solution-processed organic field-effect transistors10.1002/adma.200501152 ↗
3. Novel soluble pentacene and anthradithiophene derivatives for organic thin-film transistors10.1016/j.orgel.2010.01.022 ↗
4. A high-mobility electron-transporting polymer for printed transistors10.1038/nature07727 ↗
5. Controlling electron and hole charge injection in ambipolar organic field-effect transistors by self-assembled monolayers10.1002/adfm.200900315 ↗
6. Enhanced performance of solution-processed TESPE-ADT thin-film transistors10.1002/cphc.201300317 ↗
7. Versatile organic transistors by solution processing
8. Organic Thin−Film transistors10.1039/b909902f ↗
9. Solubility−induced ordered polythiophene precursors for high-performance organic thin−film transistors10.1002/adfm.200801763 ↗
10. Solution coating of large−area organic semiconductor thin films with aligned single-crystalline domains10.1038/nmat3650 ↗
11. High−mobility field-effect transistors fabricated with macroscopic aligned semiconducting polymers10.1002/adma.201305084 ↗
12. Wire−bar coating of semiconducting polythiophene/insulating polyethylene blend thin films for organic transistors10.1063/1.3660779 ↗
13. Simple bar−coating process for large-area, high-performance organic field−effect transistors and ambipolar complementary integrated circuits10.1002/adma.201205330 ↗
14. Solution-printed organic semiconductor blends exhibiting transport properties on par with single crystals10.1038/ncomms9598 ↗
15. Solution-processed donor-acceptor polymer nanowire network semiconductors for high-performance field−effect transistors10.1038/srep24476 ↗
16. The novel additive 1−naphthalenethiol opens a new processing route to efficiency-enhanced polymer solar cells10.1002/adfm.201505249 ↗
17. Tutorial: organic field-effect transistors: materials, structure and operation10.1063/1.5042255 ↗
18. A pedagogical perspective on ambipolar FETs10.1002/cphc.201300014 ↗
19. Solvent additive to achieve highly ordered nanostructural semicrystalline DPP copolymers: toward a high charge carrier mobility10.1002/adma.201301438 ↗
20. Additives for morphology control in high-efficiency organic solar cells10.1016/j.mattod.2013.08.013 ↗
21. Understanding solidification of polythiophene thin films during spin−coating: effects of spin−coating time and processing additives10.1038/srep13288 ↗
22. Effect of processing additives on organic photovoltaics: recent progress and future prospects10.1002/aenm.201601496 ↗
23. In situ morphology studies of the mechanism for solution additive effects on the formation of bulk heterojunction films10.1002/aenm.201400975 ↗
24. Synergistic impact of solvent and polymer additives on the film formation of small molecule blend films for bulk heterojunction solar cells10.1002/aenm.201501121 ↗
25. High operational and environmental stability of high-mobility conjugated polymer field-effect transistors through the use of molecular additives10.1038/nmat4785 ↗
26. Solution processing with a good solvent additive for highly reliable organic thin-film transistors10.1021/acs.jpcc.7b03833 ↗
27. Solvent boiling point affects the crystalline properties and performances of anthradithiophene-based devices10.1016/j.dyepig.2014.10.027 ↗
28. Crystallinity and performance improvement in solution processed organic field-effect transistors due to structural dissimilarity of the additive solvent10.1016/j.synthmet.2016.01.013 ↗
29. Synthesis, morphology, and field-effect mobility of anthradithiophenes10.1021/ja9728381 ↗
30. Stable, crystalline acenedithiophenes with up to seven linearly fused rings10.1021/ol048686d ↗
31. Organic single-crystal field-effect transistors of a soluble anthradithiophene10.1021/cm8021165 ↗
32. Functionalized anthradithiophenes for organic field-effect transistors10.1039/b715746k ↗
33. Organic field-effect transistors from solution-deposited functionalized acenes with mobilities as high as 1 cm2/V.s10.1021/ja042353u ↗
34. Chromophore fluorination enhances crystallization and stability of soluble anthradithiophene semiconductors10.1021/ja073235k ↗
35. Quantitative analysis of the density of trap states at the semiconductor-dielectric interface in organic field-effect transistors10.1063/1.4930310 ↗
36. Interface engineering to enhance charge injection and transport in solution-deposited organic transistors10.1016/j.orgel.2017.07.032 ↗
37. A simple and robust approach to reducing contact resistance in organic transistors10.1038/s41467-018-07388-3 ↗
38. Solution‐processed small molecule‐polymer blend organic thin‐film transistors with hole mobility greater than 5 cm2/Vs10.1002/adma.201200088 ↗
39. Morphology and molecular orientation of thin-film bis(triisopropylsilylethynyl) pentacene10.1557/JMR.2007.0220 ↗
40. Controlling nucleation and crystallization in solution‐processed organic semiconductors for thin‐film transistors10.1002/adma.200900705 ↗
41. Contact-induced crystallinity for high-performance soluble acene-based transistors and circuits10.1038/nmat2122 ↗
42. Tailored interfaces for self-patterning organic thin-film transistors10.1039/c2jm33974a ↗
43. Correlation between microstructure, electronic properties and flicker noise in organic thin film transistor10.1063/1.2903508 ↗
44. Contact-induced crystallinity for high-performance soluble acene-based transistors and circuits10.1038/nmat2122 ↗
45. Direct structural mapping of organic field-effect transistors reveals bottlenecks to carrier transport10.1002/adma.201201856 ↗
46. Charge-transport physics of high-mobility molecular semiconductors10.1002/pssb.201248143 ↗
47. Structure–function relations in diF-TES-ADT blend organic field effect transistors studied by scanning probe microscopy10.1039/C3TC31783H ↗
48. Effects of polymorphism on charge transport in organic semiconductors10.1103/PhysRevB.80.085201 ↗
49. Influence of grain sizes on the mobility of organic thin-film transistors10.1063/1.1954901 ↗
50. Organic thin film transistors: from theory to real devices10.1557/JMR.2004.0266 ↗
51. Gate voltage dependent resistance of a single organic semiconductor grain boundary10.1021/jp004519t ↗
52. Electronic transport properties of pentacene single crystals upon exposure to air10.1063/1.2001130 ↗
53. Water-induced polaron formation at the pentacene surface: quantum mechanical molecular mechanics simulations10.1103/PhysRevB.79.155316 ↗