Effects of bridge units on the properties of indolo[3,2-b]carbazole-co-difluorobenzo[d][1,2,3]triazole based π-conjugated copolymers
Source abstract
Abstract
Abstract Two novel donor-π-acceptor type of conjugated polymers with thiophene or selenophene as the π-bridge between the electron-donating indolocarbazole and electron-accepting difluorobenzotriazole unit, were designed and synthesized through a palladium catalyzed Suzuki polymerization. The replacement of the thiophene bridge by selenophene shows negligible effects on the geometries of molecular chain, as indicated by theoretical calculation on the basis of density of functional theory. However, obvious bathochromic shift along with the increased intensity in the UV–vis absorption profile of selenophene based copolymers relative to their thiophene based counterparts are realized, as can be attributed to the more pronounced heavy atom effects of the selenium than the sulfur atom. Compared to the thiophene based copolymer, the selenophene based copolymer exhibited about one order of magnitude increase in hole mobility, from 0.0014 to 0.01 cm2 V−1 s−1, and about two times of magnitude increase in power conversion efficiency, from 1.01% to 2.39%, as evaluated by field effect transistors and bulk heterojunction polymer solar cells, respectively. These results indicated that the selection of appropriate π-bridge by is crucial for the improvement of performance of π-conjugated polymers.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Organic Electronics and Photovoltaics · Conducting polymers and applications · Organic Light-Emitting Diodes Research
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (51)
Show source-provided references
1. Recent progress in the design of narrow bandgap conjugated polymers for high-efficiency organic solar cells10.1016/j.progpolymsci.2012.03.001 ↗
2. A rational molecular design of beta-phase polydiarylfluorenes: synthesis, morphology, and organic lasers10.1021/ma402585n ↗
3. Interface engineering: an effective approach toward high-performance organic field-effect transistors10.1021/ar9000873 ↗
4. Efficiency roll-off in organic light-emitting diodes10.1002/adma.201301603 ↗
5. Location and number of selenium atoms in two-dimensional conjugated polymers affect their band-gap energies and photovoltaic performance10.1021/ma501720k ↗
6. Indolo[3,2-carbazole-based alternating donor–acceptor copolymers: synthesis, properties and photovoltaic application10.1039/b912258c ↗
7. Synthesis and properties of D-A copolymers based on dithienopyrrole and benzothiadiazole with various numbers of thienyl units as spacers10.1039/C4PY00975D ↗
8. Effects of π-conjugated bridges on photovoltaic properties of donor-π-acceptor conjugated copolymers10.1021/ma202656b ↗
9. A selenophene analogue of PCDTBT: selective fine-tuning of LUMO to lower of the bandgap for efficient polymer solar cells10.1021/ma302133h ↗
10. Effect of selenophene in a DPP copolymer incorporating a vinyl group for high-performance organic field-effect transistors10.1002/adma.201202867 ↗
11. Boosting the ambipolar performance of solution-processable polymer semiconductors via hybrid side-chain engineering10.1021/ja403949g ↗
12. Novel diketopyrroloppyrrole random copolymers: high charge-carrier mobility from environmentally benign processing10.1002/adma.201400877 ↗
13. Synthesis and morphological studies of a poly(5,6-difluorobenzo-2,1,3-thiadiazole-4,7-diyl-alt-quaterchalcogenophene) copolymer with 7.3% polymer solar cell efficiency10.1039/C4PY00777H ↗
14. The effect of different chalcogenophenes in isoindigo-based conjugated copolymers on photovoltaic properties10.1039/C4PY00791C ↗
15. TPD-Based copolymers with strong interchain aggregation and high hole mobility for efficient bulk heterojunction solar cells10.1021/ma501888z ↗
16. Side chain selection for designing highly efficient photovoltaic polymers with 2D-conjugated structure10.1021/ma500829r ↗
17. Solution-processable ambipolar diketopyrrolopyrrole-selenophene polymer with unprecedentedly high hole and electron mobilities10.1021/ja308927g ↗
18. Record high hole mobility in polymer semiconductors via side-chain engineering10.1021/ja405112s ↗
19. Synthesis and photovoltaic properties of D-A copolymers based on dithienosilole and benzotriazole10.1021/ma201673m ↗
20. Conjugated side-chain-isolated D-A copolymers based on benzo[1,2-b:4,5-b′]dithiophene-alt-dithienylbenzotriazole: synthesis and photovoltaic properties10.1021/cm3017006 ↗
21. Benzotriazole-containing planar conjugated polymers with noncovalent conformational locks for thermally stable and efficient polymer field-effect transistors10.1021/cm4042346 ↗
22. Fluorinated copolymer PCPDTBT with enhanced open-circuit voltage and reduced recombination for highly efficient polymer solar cells10.1021/ja305039j ↗
23. Fluorine substituents reduce charge recombination and drive structure and morphology development in polymer solar cells10.1021/ja309289u ↗
24. Effect of fluorination on the properties of a donor–acceptor copolymer for use in photovoltaic cells and transistors10.1021/cm301910t ↗
25. Effect of fluorine content in thienothiophene-benzodithiophene copolymers on the morphology and performance of polymer solar cells10.1021/cm500953e ↗
26. Manipulating backbone structure with various conjugated spacers to enhance photovoltaic performance of D-A-type two-dimensional copolymerse10.1016/j.orgel.2014.08.022 ↗
27. Synthesis, characterization, and application of indolo[3,2-b]carbazole semiconductors10.1021/ja071923y ↗
28. Substitution effect on molecular packing and transistor performance of indolo[3,2-b]carbazole derivatives10.1039/C1JM14891E ↗
29. Crystalline low band-gap alternating indolocarbazole and benzothiadiazole-cored oligothiophene copolymer for organic solar cell applications10.1039/b811031j ↗
30. Indolo[3,2-b]carbazole and benzofurazan based narrow band-gap polymers for photovoltaic cells10.1039/C4NJ00705K ↗
31. An alternating copolymer derived from indolo[3,2-b]carbazole and 4,7-di(thieno[3,2-b]thien-2-yl)-2,1,3-benzothiadiazole for photovoltaic cells10.1002/marc.201000062 ↗
32. Effect of chalcogen atom substitution on the optoelectronic properties in cyclopentadithiophene polymers10.1021/ma5014308 ↗
33. Frisch · 2009
34. Narrow-band-gap conjugated polymers based on 2,7-dioctyl-substituted dibenzo[a, c]phenazine derivatives for polymer solar cells10.1021/ma500333r ↗
35. Donor–acceptor copolymers based on benzo [1,2-b:4,5-b′] and pyrene-fused phenazine for high-performance polymer solar cells10.1016/j.orgel.2014.09.019 ↗
36. Comparison of thiophene- and selenophene-bridged donor–acceptor low bandgap copolymers used in bulk-heterojunction organic photovoltaics10.1039/c2jm33735e ↗
37. Selenophene vs. thiophene in benzothiadiazole-based low energy gap donor–acceptor polymers for photovoltaic applications10.1039/c3ta00122a ↗
38. Tuning fluorinated benzotriazole polymers through alkylthio substitution and selenophene incorporation for bulk heterojunction solar cells10.1021/ma5001095 ↗
39. Polymer/polymer blend solar cells using tetraazabenzodifluoranthene diimide conjugated polymers as electron acceptors10.1021/ma502042k ↗
40. Ring substituents mediate the morphology of PBDTTPD-PCBM bulk-heterojunction solar cells10.1021/cm500172w ↗
41. Stokes shift/emission efficiency trade-off in donor–acceptor perylenemonoimides for luminescent solar concentrators10.1039/C5TA01134E ↗
42. The enhanced performance of fluorinated quinoxaline-containing polymers by replacing carbon with silicon bridging atoms on the dithiophene donor skeleton10.1039/C4PY01622J ↗
43. 25th anniversary article: organic field-effect transistors: the path beyond amorphous silicon10.1002/adma.201304346 ↗
44. Alternating conjugated electron donor–acceptor polymers entailing pechmann dye framework as the electron acceptor moieties for high performance organic semiconductors with tunable characteristics10.1021/ma5003694 ↗
45. Benzotrithiophene copolymers: influence of molecular packing and energy levels on charge carrier mobility10.1021/ma500163u ↗
46. Recent advances in polymer solar cells: realization of high device performance by incorporating water/alcohol-soluble conjugated polymers as electrode buffer layer10.1002/adma.201303391 ↗
47. Design rules for donors in bulk-heterojunction solar cells—towards 10% energy-conversion efficiency10.1002/adma.200501717 ↗
48. How far can polymer solar cells go? In need of a synergistic approach10.1021/jz201479b ↗
49. Tailored donor–acceptor polymers with an A-D1-A-D2 structure: controlling intermolecular interactions to enable enhanced polymer photovoltaic devices10.1021/ja500935d ↗
50. Design, application, and morphology study of a new photovoltaic polymer with strong aggregation in solution state10.1021/ma301900h ↗
51. Aqueous self-assembly of an electroluminescent double-helical metallopolymer10.1021/ja308055s ↗