Propeller-like acceptors with difluoride perylene diimides for organic solar cells
Source abstract
Abstract
Abstract Perylene diimide (PDI) is one of most intensively studied non-fullerene small molecule acceptors (SMAs). By fluorination on the conjugated backbone, a new PDI with difluoride substitution on adjacent bay positions of PDI is prepared. Then, four propeller-like SMAs are obtained by linking four PDIs with an aromatic core, wherein the molecular geometry is modulated by ring fusion of the aromatic core. Further study reveals that fluorination is helpful to enhance the absorption intensity, and thus promote the current density in organic solar cells. In addition, the ring-fused strategy is able to suppress the distortion and rotation of relevant molecules. Therefore, these four acceptors exhibit significantly diversity of photovoltaic performance, wherein the acceptor FPDIF4-DTC consisting of a fused core and fluoro-substituted PDIs shows a best efficiency of 5.1%. This result implies that fluorination on PDI conjugated backbone is a successful way to construct promising SMAs.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Organic Electronics and Photovoltaics · Molecular Junctions and Nanostructures · Conducting polymers and applications
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (58)
Show source-provided references
1. Fused benzothiadiazole: a building block for n-type organic acceptor to achieve high-performance organic solar cells10.1002/adma.201807577 ↗
2. An electron acceptor with porphyrin and perylene bisimides for efficient non-fullerene solar cells10.1002/anie.201612090 ↗
3. Low-temperature in-situ preparation of ZnO electron extraction layer for efficient inverted polymer solar cells10.1016/j.orgel.2019.06.053 ↗
4. Ladder-type high gap conjugated polymers based on indacenodithieno[3,2-b]thiophene and bithiazole for organic photovoltaics10.1016/j.orgel.2019.07.010 ↗
5. Molecular orientation of polymer acceptor dominates open-circuit voltage losses in all-polymer solar cells10.1021/acsenergylett.9b00416 ↗
6. Solution processing dependent bulk heterojunction nanomorphology of P3HT/PCBM thin films10.1021/acsami.9b02719 ↗
7. Photovoltage loss in semi-transparent organic photovoltaic devices10.1016/j.orgel.2019.06.051 ↗
8. Comparison among perylene diimide (PDI), naphthalene diimide (NDI), and naphthodithiophene diimide (NDTI) based n-type polymers for all-polymer solar cells application10.1021/acs.macromol.7b00414 ↗
9. Morphological study of P3HT:PCBM blend films prepared through solvent annealing for solar cell applications10.1016/j.solmat.2010.09.004 ↗
10. Light manipulating electrode based on high optical haze aluminum-doped zinc oxide for highly efficient indium-tin-oxide free organic solar cells with over 13% efficiency10.1039/C9TC02189B ↗
11. A non-fullerene electron acceptor with a spirobifluorene core and four diketopyrrolopyrrole arms end capped by 4-fluorobenzene10.1016/j.dyepig.2017.04.045 ↗
12. Morphology control enables efficient ternary organic solar cells10.1002/adma.201803045 ↗
13. Rationalizing device performance of perylenediimide derivatives as acceptors for bulk-heterojunction organic solar cells10.1016/j.orgel.2018.11.006 ↗
14. Thieno[3,2-b]pyrrolo-Fused pentacyclic benzotriazole-based acceptor for efficient organic photovoltaics10.1021/acsami.7b10995 ↗
15. Eco-compatible solvent-processed organic photovoltaic cells with over 16% efficiency10.1002/adma.201903441 ↗
16. Organic and solution-processed tandem solar cells with 17.3% efficiency10.1126/science.aat2612 ↗
17. High-performance all-polymer solar cells enabled by an n-type polymer based on a fluorinated imide-functionalized arene10.1002/adma.201807220 ↗
18. Tailor-made rylene arrays for high performance n-channel semiconductors10.1021/ar500240e ↗
19. Enhanced efficiency in fullerene-free polymer solar cell by incorporating fine-designed donor and acceptor materials10.1021/acsami.5b02012 ↗
20. Oligo(ethylene oxide) chains in fluorene bridge units of perylenediimide dimers as an efficient strategy for improving the photovoltaic performance in organic solar cells10.1016/j.dyepig.2018.09.051 ↗
21. Manipulating polymer donors toward a high-performance polymer acceptor based on a fused perylenediimide building block with a built-in twisting configuration10.1021/acsami.9b07067 ↗
22. Recent progress in n-channel organic thin-film transistors10.1002/adma.200901454 ↗
23. Synthesis of annulated thiophene perylene bisimide analogues: their applications to bulk heterojunction organic solar cells10.1039/C0CC05448H ↗
24. Aromatic-diimide-based n-type conjugated polymers for all-polymer solar cell applications
25. Non-fullerene electron acceptors for use in organic solar cells10.1021/acs.accounts.5b00199 ↗
26. Improved performance of all-polymer solar cells enabled by naphthodiperylenetetraimide-based polymer acceptor10.1002/adma.201700309 ↗
27. Boosting the electron mobilities of dimeric perylenediimides by simultaneously enhancing intermolecular and intramolecular electronic interactions10.1039/C8TA04932G ↗
28. Naphthalenediimide-based n-type polymer acceptors with pendant twisted perylenediimide units for all-polymer solar cells10.1016/j.polymer.2018.10.062 ↗
29. PDI derivative through fine-tuning the molecular structure for fullerene-free organic solar cells10.1021/acsami.7b08282 ↗
30. Nonfullerene-acceptor all-small-molecule organic solar cells based on highly twisted perylene bisimide with an efficiency of over 6%10.1021/acsami.6b13721 ↗
31. Asymmetrical vs symmetrical selenophene-annulated fused perylenediimide acceptors for efficient non-fullerene polymer solar cells10.1021/acsaem.8b01484 ↗
32. Effect of conjugation length on the properties of fused perylene diimides with variable isoindigos10.1039/C9TC04078A ↗
33. Small molecular PDI-functionalized 9,9′-bifluorenylidene acceptors for bulk heterojunction organic solar cells10.1039/C7NJ00656J ↗
34. Influence of alkyl chains on photovoltaic properties of 3D rylene propeller electron acceptors10.1039/C6TA09049D ↗
35. Covalently bound clusters of alpha-substituted PDI-rival electron acceptors to fullerene for organic solar cells10.1021/jacs.6b03562 ↗
36. A triptycene-cored perylenediimide derivative and its application in organic solar cells as a non-fullerene acceptor10.1039/C7NJ01971H ↗
37. A perylenediimide dimer containing an asymmetric π-bridge and its fused derivative for fullerene-free organic solar cells10.1039/C8TC00089A ↗
38. Efficient organic solar cells with extremely high open-circuit voltages and low voltage losses by suppressing nonradiative recombination losses10.1002/aenm.201801699 ↗
39. Rational design of truxene-bridged PDI trimers as acceptors for efficient organic solar cells10.1016/j.dyepig.2018.04.020 ↗
40. Rigidifying nonplanar perylene diimides by ring fusion toward geometry-tunable acceptors for high-performance fullerene-free solar cells10.1002/adma.201504120 ↗
41. Three-bladed rylene propellers with three-dimensional network assembly for organic electronics10.1021/jacs.6b04368 ↗
42. Pronounced effects of a triazine core on photovoltaic performance-efficient organic solar cells enabled by a PDI trimer-based small molecular acceptor10.1002/adma.201605115 ↗
43. Ring-fusion of perylene diimide acceptor enabling efficient nonfullerene organic solar cells with a small voltage loss10.1021/jacs.7b09998 ↗
44. Drastic effects of fluorination on backbone conformation of head-to-head bithiophene-based polymer semiconductors10.1021/acsmacrolett.8b00032 ↗
45. Quinoxaline-based wide band gap polymers for efficient nonfullerene organic solar cells with large open-circuit voltages10.1021/acsami.8b04432 ↗
46. Fused nonacyclic electron acceptors for efficient polymer solar cells10.1021/jacs.6b12755 ↗
47. Side chain promoted benzodithiophene-based conjugated polymers toward striking enhancement of photovoltaic properties for polymer solar cells10.1021/acsami.8b16554 ↗
48. Fluorination effects on indacenodithienothiophene acceptor packing and electronic structure, end-group redistribution, and solar cell photovoltaic response10.1021/jacs.8b13653 ↗
49. Influence of regio- and chemoselectivity on the properties of fluoro-substituted thienothiophene and benzodithiophene copolymers10.1021/jacs.5b04209 ↗
50. Synergistic effect of fluorination on both donor and acceptor materials for high performance non-fullerene polymer solar cells with 13.5% efficiency10.1007/s11426-017-9199-1 ↗
51. A large-bandgap conjugated polymer for versatile photovoltaic applications with high performance10.1002/adma.201502110 ↗
52. Molecular optimization enables over 13% efficiency in organic solar cells10.1021/jacs.7b02677 ↗
53. Core-fluorinated perylene bisimide dyes: air stable n-channel organic semiconductors for thin film transistors with exceptionally high on-to-off current ratios10.1002/adma.200701478 ↗
54. Synthesis and thermolysis of a Diels–Alder adduct of pentacene and thiophosgene10.1016/j.tetlet.2004.08.011 ↗
55. Preparation and characterization of regioisomerically pure 1,7-disubstituted perylene bisimide dyes10.1021/jo048880d ↗
56. Molecular wires from contorted aromatic compounds10.1002/ange.200502142 ↗
57. A regioregular conjugated polymer for high performance thick-film organic solar cells without processing additive10.1039/C7TA02391J ↗
58. Non-fullerene-acceptor-based bulk-heterojunction organic solar cells with efficiency over 7%10.1021/jacs.5b06414 ↗