Air-stable polythiophene-based thin film transistors processed using oxidative chemical vapor deposition: Carrier transport and channel/metallization contact interface
Source abstract
Abstract
Abstract Oxidative chemical-vapor-deposition (oCVD) provides a facile route to polymerize and deposit insoluble monomers in thin film form. Here, we report on oCVD polythiophene (PT)-based organic thin film transistors (OTFTs) that present both high mobility and excellent stability over time in air. The measured field effect mobility (μFE) is ∼0.02 cm2/V sec with the low threshold voltage between −1 V and 0.3 V. Additionally the PT OTFTs show no evidence of performance degradation after 3 months exposure in air. The transmission line model (TLM) enables the determination of the specific contact resistance (ρC) of oCVD PT channel/metallization interface and reveals that ρC is improved with increasing gate bias. The oCVD PT channel conductivity (σch) and carrier density (p) were evaluated from more than 100 devices using TLM measurements and the relation of σch = qpμFE. Carrier transport analysis suggests that the charge screening effect governs hole carrier mobility in the carrier density regime below approximately 1018/cm3 where an increase in carrier density leads to higher mobility. We also demonstrate photo-conductivity of oCVD PT through an increase in device on-state current and the field effect mobility when the PT OTFT is illuminated. Strategies to further enhance the performance of the materials and devices are also suggested.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Organic Electronics and Photovoltaics · Thin-Film Transistor Technologies · Conducting polymers and applications
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (63)
Show source-provided references
1. The chemistry of conducting polythiophenes10.1002/(SICI)1521-4095(199801)10:2<93::AID-ADMA93>3.0.CO;2-F ↗
2. Polymer-fullerene bulk-heterojunction solar cells10.1002/adma.200903697 ↗
3. Low band gap polymers for organic photovoltaics10.1016/j.solmat.2007.01.015 ↗
4. The path to ubiquitous and low-cost organic electronic appliances on plastic10.1038/nature02498 ↗
5. Organic field-effect transistors from solution-deposited functionalized acenes with mobilities as high as 1 cm(2)/V-s10.1021/ja042353u ↗
6. Functionalized acenes and heteroacenes for organic electronics10.1021/cr050966z ↗
7. High mobility n-channel organic thin-film transistors and complementary inverters10.1063/1.2043256 ↗
8. High-mobility pentacene-based thin-film transistors with a solution-processed barium titanate insulator10.1109/LED.2010.2084559 ↗
9. High field-effect mobility from poly(3-hexylthiophene) thin-film transistors by solvent–vapor-induced reflow10.1016/j.orgel.2009.04.015 ↗
10. Fully patterned all-organic thin film transistors10.1063/1.1491604 ↗
11. Solution-processed bootstrapped organic inverters based on P3HT with a high-k gate dielectric material10.1109/LED.2009.2016679 ↗
12. Fabrication and analysis of polymer field-effect transistors10.1002/pssa.200404335 ↗
13. Low-temperature, solution-processed, high-mobility polymer semiconductors for thin-film transistors10.1021/ja067879o ↗
14. Effect of density of states on mobility in small-molecule n-Type organic thin-film transistors based on a perylene diimide, electron device letters
15. In situ electrical characterization of DH4T field-effect transistors10.1016/j.synthmet.2004.08.010 ↗
16. A stable solution-processed polymer semiconductor with record high-mobility for printed transistors10.1038/srep00754 ↗
17. Inkjet printing of single-crystal films10.1038/nature10313 ↗
18. Ultra-high mobility transparent organic thin film transistors grown by an off-centre spin-coating method10.1038/ncomms4005 ↗
19. Brédas · 2012
20. Conformal, conducting poly(3,4-ethylenedioxythiophene) thin films deposited using bromine as the oxidant in a completely dry oxidative chemical vapor deposition process10.1021/cm100092c ↗
21. Direct monolithic integration of organic photovoltaic circuits on unmodified paper
22. oCVD poly(3,4-ethylenedioxythiophene) conductivity and lifetime enhancement via acid rinse dopant exchange10.1039/C2TA00321J ↗
23. Heavily doped poly(3,4-ethylenedioxythiophene) thin films with high carrier mobility deposited using oxidative CVD: conductivity stability and carrier transport10.1002/adfm.201401282 ↗
24. The application of oxidative chemical vapor deposited (oCVD) PEDOT to textured and non-planar photovoltaic device geometries for enhanced light trapping10.1016/j.orgel.2013.05.004 ↗
25. Top-illuminated organic photovoltaics on a variety of opaque substrates with vapor-printed poly(3,4-ethylenedioxythiophene) top electrodes and MoO3 buffer layer10.1002/aenm.201200112 ↗
26. Conformal coverage of poly(3,4-ethylenedioxythiophene) films with tunable nanoporosity via oxidative chemical vapor deposition10.1021/nn800380e ↗
27. Doping level and work function control in oxidative chemical vapor deposited poly (3,4-ethylenedioxythiophene)10.1063/1.2721376 ↗
28. Enhanced optical property with tunable band gap of cross-linked PEDOT copolymers via oxidative chemical vapor deposition10.1002/adfm.201402924 ↗
29. 25th anniversary article: CVD polymers: a new paradigm for surface modification and device fabrication10.1002/adma.201301878 ↗
30. Scale-up of oCVD: large-area conductive polymer thin films for next-generation electronics10.1039/C4MH00222A ↗
31. Bilayer heterojunction polymer solar cells using unsubstituted polythiophene via oxidative chemical vapor deposition10.1016/j.solmat.2011.11.040 ↗
32. Optoelectronic properties of polythiophene thin films and organic TFTs fabricated by oxidative chemical vapor deposition10.1039/C4TC00881B ↗
33. Organic photovoltaic devices based on polythiophene films electrodeposited on FTO substrates10.1016/j.solmat.2006.12.005 ↗
34. Preparation and characterization of plasma-polymerized thiophene films10.1002/(SICI)1097-4628(19981003)70:1<203::AID-APP20>3.0.CO;2-6 ↗
35. Streetman · 2006
36. Charge storage in doped poly(thiophene) – optical and electrochemical studies10.1103/PhysRevB.30.702 ↗
37. Synthesis and properties of chemically coupled poly(thiophene)10.1016/0379-6779(84)90044-4 ↗
38. Models for contacts to planar devices10.1016/0038-1101(72)90048-2 ↗
39. A study of the specific contact resistance and channel resistivity of amorphous IZO thin film transistors with IZO source-drain metallization10.1063/1.3549810 ↗
40. High-mobility and low-operating voltage organic thin film transistor with epoxy based siloxane binder as the gate dielectric10.1063/1.4930305 ↗
41. High-mobility organic thin-film transistors based on a small-molecule semiconductor deposited in vacuum and by solution shearing10.1016/j.orgel.2013.09.003 ↗
42. High-mobility pyrene-based semiconductor for organic thin-film transistors10.1021/am4005368 ↗
43. Fully solution-processed flexible organic thin film transistor arrays with high mobility and exceptional uniformity10.1038/srep03947 ↗
44. Amorphous IZO-based transparent thin film transistors10.1016/j.tsf.2007.10.081 ↗
45. Organic thin-film transistors using pi-conjugated oligomers – influence of the chain-length
46. Molecular beam deposited thin films of pentacene for organic field effect transistor applications10.1063/1.363032 ↗
47. Logic gates made from polymer transistors and their use in ring oscillators10.1126/science.270.5238.972 ↗
48. High-performance polymer-small molecule blend organic transistors10.1002/adma.200801725 ↗
49. Metallization selection and the performance of amorphous In-Zn-O thin film transistors10.1063/1.4885118 ↗
50. Degradation of organic solar cells due to air exposure10.1016/j.solmat.2006.06.041 ↗
51. Degradation patterns in water and oxygen of an inverted polymer solar cell10.1021/ja106299g ↗
52. Investigation of the effects of doping and post-deposition treatments on the conductivity, morphology, and work function of poly (3,4-ethylenedioxythiophene)/poly (styrene sulfonate) films10.1002/adfm.200400073 ↗
53. Influence of thermal treatment on the conductivity and morphology of PEDOT/PSS films10.1016/S0379-6779(03)00280-7 ↗
54. Longterm stability of efficient inverted P3HT: PCBM solar cells10.1016/j.solmat.2008.12.022 ↗
55. Conductivity, work function, and environmental stability of PEDOT : PSS thin films treated with sorbitol10.1016/j.orgel.2008.05.006 ↗
56. Microscopic understanding of the anisotropic conductivity of PEDOT : PSS thin films10.1002/adma.200602575 ↗
57. Thermal degradation mechanisms of PEDOT: PSS10.1016/j.orgel.2008.10.008 ↗
58. Significant improvement of polymer solar cell stability10.1021/cm051320q ↗
59. Bulk heterojunctions based on native polythiophene10.1021/cm800431s ↗
60. Stable polythiophene semiconductors incorporating thieno[2,3-b]thiophene10.1021/ja043112p ↗
61. Polythiophene-based field-effect transistors with enhanced air stability10.1016/j.synthmet.2003.07.004 ↗
62. Low substrate temperature encapsulation for flexible electrodes and organic photovoltaics10.1002/aenm.201401442 ↗
63. The effect of metallization contact resistance on the measurement of the field effect mobility of long-channel unannealed amorphous In-Zn-O thin film transistors10.1016/j.tsf.2011.11.067 ↗