journal article·2020-02

A series of porphyrins as interfacial materials for inverted perovskite solar cells

Xingcui Feng, Yihong Huan, Chaoyue Zheng, Chao Tan, Hong Meng, Bing Liu, Deqing Gao, Wei Huang

Publisher page

Abstract

Abstract Interface materials can improve the photovoltaic performance of the hybrid organic-inorganic perovskite solar cells (PSCs). Here, a series of porphyrin derivatives (metalloporphyrins: MTPPS4, M = Zn2+, Cu2+, Co2+, Ni2+; free base porphyrin: TPPS4) were developed to act as interfacial materials in PSCs. The introduction of porphyrin interlayers between PEDOT:PSS and perovskite layer in the inverted PSCs not only made energy level more matching but also improved the quality of the perovskite layer. Compared with the control device without an interlayer, the maximum power conversion efficiencies (PCE) of devices with the interlayers (in the order of ZnTPP4, CuTPP4, CoTPP4, NiTPP4 and TPP4) were increased by 23%, 25%, 21%, 17% and 13%, respectively. The highest PCE of 14.61% was based on the CuTPPS4-modified device. The porphyrins acted as the interlayers to promote carrier transport and reduce charge recombination at the interface, resulting in the increase of open-circuit voltage (VOC), short-circuit current density (JSC) and fill factor (FF).
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Perovskite Materials and Applications · Conducting polymers and applications · Organic Electronics and Photovoltaics

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (35)

Show source-provided references
1. Organometal halide perovskites as visible-light sensitizers for photovoltaic cells10.1021/ja809598r ↗
2. National Renewable Energy Laboratory (NREL)
3. Sequential deposition as a route to high-performance perovskite-sensitized solar cells10.1038/nature12340 ↗
4. Quantitative doping of chlorine in formamidinium lead trihalide (FAPbI(3−x)Cl(x)) for planar heterojunction perovskite solar cells10.1002/aenm.201601297 ↗
5. Large‐grain formamidinium PbI3-xBrx for high‐performance perovskite solar cells via intermediate halide exchange10.1002/aenm.201601882 ↗
6. Long-range balanced electron- and hole-transport lengths in organic-inorganic CH3NH3PbI310.1126/science.1243167 ↗
7. Mesoscopic CH3NH3PbI3/TiO2 heterojunction solar cells10.1021/ja307789s ↗
8. Chemical management for colorful, efficient, and stable inorganic-organic hybrid nanostructured solar cells10.1021/nl400349b ↗
9. Efficient and stable large-area perovskite solar cells with inorganic charge extraction layers10.1126/science.aad1015 ↗
10. Performance improvement of perovskite solar cells by employing a CdSe quantum dot/PCBM composite as an electron transport layer10.1039/C7TA00203C ↗
11. Performance improvement of perovskite solar cells through enhance hole extraction: the role of iodide concentration gradient10.1016/j.solmat.2018.05.025 ↗
12. Stable dynamics performance and high efficiency of ABX3-type super-alkali perovskites first obtained by introducing H5O2 cation
13. Efficient hybrid solar cells based on meso-superstructured organometal halide perovskites10.1126/science.1228604 ↗
14. Low-temperature solution-processed perovskite solar cells with high efficiency and flexibility10.1021/nn406020d ↗
15. p-i-n/n-i-p type planar hybrid structure of highly efficient perovskite solar cells towards improved air stability: synthetic strategies and the role of p-type hole transport layer (HTL) and n-type electron transport layer (ETL) metal oxides10.1039/C6NR02276F ↗
16. Efficient planar heterojunction perovskite solar cells by vapour deposition10.1038/nature12509 ↗
17. Interface engineering of a compatible PEDOT derivative bilayer for high‐performance inverted perovskite solar cells10.1002/admi.201600948 ↗
18. Improving film formation and photovoltage of highly efficient inverted-type perovskite solar cells through the incorporation of new polymeric hole selective layers10.1002/aenm.201502021 ↗
19. Interfacial modification in organic and perovskite solar cells
20. Reducing surface recombination velocities at the electrical contacts will improve perovskite photovoltaics10.1021/acsenergylett.8b02058 ↗
21. Efficient and stable planar heterojunction perovskite solar cells with an MoO3/PEDOT:PSS hole transporting layer10.1039/C5NR01864A ↗
22. Theoretical investigations on the orientational dependence of electron transport through porphyrin molecular wire10.1016/j.cap.2011.04.001 ↗
23. Porphyrin-Sensitized solar cells10.1039/C2CS35257E ↗
24. Diphenyl-2-pyridylamine-substituted porphyrins as hole-transporting materials for perovskite solar cells10.1002/cssc.201701526 ↗
25. Perfection of perovskite grain boundary passivation by Eu-porphyrin complex for overall-stable perovskite solar cells10.1002/advs.201802040 ↗
26. Monoammonium porphyrin for blade-coating stable large-area perovskite solar cells with > 18% efficiency10.1021/jacs.9b01305 ↗
27. Large planar π-conjugated porphyrin for interfacial engineering in p-i-n perovskite solar cells10.1021/acsami.6b10342 ↗
28. Preparation of non-covalent metalloporphyrin/C60 composite and its electrocatalysis to hydrogen peroxide10.1002/elan.201600495 ↗
29. Boosting the power conversion efficiency of perovskite solar cells using self-organized polymeric hole extraction layers with high work function10.1002/adma.201401775 ↗
30. Two symmetrically bis-substituted pyrene derivatives: synthesis, photoluminescence, and electroluminescence10.1002/cjoc.201500385 ↗
31. Porphyrin oriented self-assembled nanostructures for efficient exciton dissociation in high-performing organic photovoltaics10.1039/C3TA13107F ↗
32. Non-wetting surface-driven high-aspect-ratio crystalline grain growth for efficient hybrid perovskite solar cells10.1038/ncomms8747 ↗
33. Ultraviolet-ozone surface modification for non-wetting hole transport materials based inverted planar perovskite solar cells with efficiency exceeding 18%10.1016/j.jpowsour.2017.06.013 ↗
34. Hysteresis-suppressed high-efficiency flexible perovskite solar cells using solid-state ionic-liquids for effective electron transpor10.1002/adma.201600446 ↗
35. Large work function shift of organic semiconductors inducing enhanced interfacial electron transfer in organic optoelectronics enabled by porphyrin aggregated nanostructures10.1007/s12274-014-0428-9 ↗