Improved performance of organic photovoltaic devices by doping F 4 TCNQ onto solution-processed graphene as a hole transport layer
Source abstract
Abstract
Abstract Interfacial engineering is crucial for the stability and efficiency of organic solar cells. PEDOT:PSS, which has been widely used as a hole transport layer, has stability issues when exposed to air because of its acidic and hygroscopic nature. Herein, we investigated the electrical properties of reduced graphene oxide covered with an F4TCNQ interfacial layer as an alternative and its effect on the photovoltaic performance. Using an array of charge transport, spectroscopic and imaging techniques we found that the reduced graphene oxide film is efficiently hole-doped through an interfacial charge transfer, which enhances its electrical properties and favorably modifies its work function. Consequently, the open-circuit voltage and fill factor of solar cells incorporating such films are improved. P3HT might also be hole-doped by F4TCNQ, due to the formation of an intermixed interfacial layer, resulting in an increase of power conversion efficiency.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Organic Electronics and Photovoltaics · Conducting polymers and applications · Molecular Junctions and Nanostructures
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (66)
Show source-provided references
1. Polymer solar cells10.1038/nphoton.2012.11 ↗
2. Device physics of polymer: fullerene bulk heterojunction solar cells10.1002/adma.200601093 ↗
3. Conjugated polymer-based organic solar cells10.1021/cr050149z ↗
4. Polymer-fullerene bulk-heterojunction solar cells10.1002/adma.200801283 ↗
5. Recent progress in polymer solar cells: manipulation of polymer:fullerene morphology and the formation of efficient inverted polymer solar cells10.1002/adma.200802854 ↗
6. Polymer–fullerene composite solar cells10.1002/anie.200702506 ↗
7. Competition between recombination and extraction of free charges determines the fill factor of organic solar cells10.1038/ncomms8083 ↗
8. Aggregation and morphology control enables multiple cases of high-efficiency polymer solar cells10.1038/ncomms6293 ↗
9. Polymer solar cells with enhanced fill factors10.1038/nphoton.2013.207 ↗
10. Open-circuit voltage and effective gap of organic solar cells10.1002/adfm.201301048 ↗
11. Polymer donor–polymer acceptor (all-polymer) solar cells10.1016/j.mattod.2013.04.005 ↗
12. Single-junction polymer solar cells with high efficiency and photovoltage10.1038/nphoton.2015.6 ↗
13. Interface engineering for organic electronics10.1002/adfm.200902236 ↗
14. Influence of polymer ionization potential on the open-circuit voltageof hybrid polymer/TiO2 solar cells10.1063/1.2840608 ↗
15. Influence of hole-transport layers and donor materials on open-circuit voltage and shape of I-V curves of organicsolar cells10.1002/adfm.201002669 ↗
16. Interface materials for organic solar cells10.1039/b921624c ↗
17. Enhanced performance of inverted polymer solar cells with cathode interfacial tuning via water-soluble polyfluorenes10.1063/1.3522893 ↗
18. Interface investigation and engineering – achieving high performance polymer photovoltaic devices10.1039/b925382c ↗
19. Polymer solar cells that use self-assembled-monolayer- modified Zno/metals as cathodes10.1002/adma.200703050 ↗
20. Interface modification for highly efficient organic photovoltaics10.1063/1.2885724 ↗
21. Enhanced efficiency in organic solar cells via in situ fabricated p-type copper sulfide as the hole transporting layer10.1016/j.solmat.2014.05.021 ↗
22. Performance enhancement of polymer solar cells with high work function CuS modified ITO as anodes10.1016/j.orgel.2015.03.051 ↗
23. Low-temperature solution-processed graphene oxide derivative hole transport layer for organic solar cells10.1088/0022-3727/46/13/135101 ↗
24. Improving the stability of bulk heterojunction solar cells by incorporating pH-neutral PEDOT: PSS as the hole transport layer10.1021/am500336s ↗
25. Stability/degradation of polymer solar cells10.1016/j.solmat.2008.01.005 ↗
26. Blocking reactions between indium-tin oxide and poly 3,4-ethylene dioxythiophene:poly styrene sulphonate with a self-assembly monolayer10.1063/1.1469220 ↗
27. Stability of the interface between indium-tin-oxide and poly(3,4-ethylenedioxythiophene)/poly(styrenesulfonate) in polymer light-emitting diodes10.1063/1.1315344 ↗
28. Conductivity, work function, and environmental stability of PEDOT: PSS thin films treated with sorbitol10.1016/j.orgel.2008.05.006 ↗
29. Degradation of organic solar cells due to air exposure10.1016/j.solmat.2006.06.041 ↗
30. p-Type semiconducting nickel oxide as an efficiency-enhancing anode interfacial layer in polymer bulk-heterojunction solar cells10.1073/pnas.0711990105 ↗
31. Transition metal oxides as the buffer layer for polymer photovoltaic cells10.1063/1.2174093 ↗
32. Improving performance of organic solar cells using amorphous tungsten oxides as an interfacial buffer layer on transparent anodes10.1016/j.orgel.2009.03.016 ↗
33. Role of tungsten oxide in inverted polymer solar cells10.1063/1.3076134 ↗
34. Efficient, air-stable bulk heterojunction polymer solar cells using MoO(x) as the anode interfacial layer10.1002/adma.201100038 ↗
35. Solution-processable graphene oxide as an efficient hole transport layer in polymer solar cells10.1021/nn100551j ↗
36. Surface doping of conjugated polymers by graphene oxide and its application for organic electronic devices10.1002/adma.201100065 ↗
37. Anode modification of inverted polymer solar cells using graphene oxide10.1063/1.3507388 ↗
38. Temperature dependence of graphene oxide reduced by hydrazine hydrate10.1088/0957-4484/22/5/055705 ↗
39. Graphene-based composite materials10.1038/nature04969 ↗
40. The chemistry of graphene oxide10.1039/B917103G ↗
41. Radical-assisted chemical doping for chemically derived graphene10.1186/1556-276X-8-534 ↗
42. A general method for transferring graphene onto soft surfaces10.1038/nnano.2013.63 ↗
43. Surface transfer p-Type doping of epitaxial graphene10.1021/ja071658g ↗
44. Charge neutrality and band-gap tuning of epitaxial graphene on SiC by molecular doping10.1103/PhysRevB.81.235401 ↗
45. Synthesis of graphene-based nanosheets via chemical reduction of exfoliated graphite oxide10.1016/j.carbon.2007.02.034 ↗
46. Inkjet-printed reduced graphene oxide/poly(vinyl alcohol) composite electrodes for flexible transparent organic field-effect transistors10.1021/jp203441e ↗
47. Monitoring dopants by Raman scattering in an electrochemically top-gated graphene transistor10.1038/nnano.2008.67 ↗
48. Intercalation compounds of graphite10.1080/00018730110113644 ↗
49. High-resolution core level photoelectron spectra of solid TCNQ: determination of molecular orbltal spatial distribution from localized shake-up features10.1021/j100317a005 ↗
50. Beam-induced modifications of TCNQ multilayers10.1016/0039-6028(91)90786-R ↗
51. Optimal negative electrodes for poly(3-hexylthiophene): [6,6]-phenyl C61-butyric acid methyl ester bulk heterojunction photovoltaic devices10.1063/1.2841067 ↗
52. Effect of cathode buffer layer on the stability of polymer bulk heterojunction solar cells10.1016/j.solmat.2010.05.043 ↗
53. Effects of cathode buffer layers on the efficiency of bulk-heterojunction solar cells10.1063/1.3456530 ↗
54. Evolution of phase separation upon annealing and the influence on photocurrent generation in ternary blend organic solar cells10.1016/j.synthmet.2013.12.024 ↗
55. Electronic structure and current injection in zinc phthalocyanine doped with tetrafluorotetracyanoquinodimethane: interface versus bulk effects10.1016/S1566-1199(02)00033-2 ↗
56. Optimized hole injection with strong electron acceptors at organic-metal interfaces10.1103/PhysRevLett.95.237601 ↗
57. Limits of open circuit voltage in organic photovoltaic devices10.1063/1.3360336 ↗
58. Effect of molecular p-doping on hole density and mobility in poly(3-hexylthiophene)10.1063/1.3701729 ↗
59. The chemical and structural origin of efficient p-type doping in P3HT, Organ
60. Bulk heterojunction versus diffused bilayer: the role of device geometry in solution p-doped polymer-based solar cells10.1021/jz300754p ↗
61. Enhanced performance of inverted organic solar cell by a solution-based fluorinated acceptor doped P3HT: PCBM layer10.1016/j.orgel.2013.01.031 ↗
62. High performance polythiophene thin-film transistors doped with very small amounts of an electron acceptor10.1063/1.2883927 ↗
63. Effect of interchain interactions on the absorption and emission of poly (3-hexylthiophene)10.1103/PhysRevB.67.064203 ↗
64. Optical absorption of poly(3-hexylthiophene) at low temperatures10.1016/0038-1098(89)90087-2 ↗
65. Comprehensive picture of p-type doping of P3HT with the molecular acceptor F4TCNQ10.1103/PhysRevB.87.115209 ↗
66. High-effi ciency polymer solar cells enhanced by solvent treatment10.1002/adma.201204306 ↗