journal article·2020-07

Efficient and stable mesoporous perovskite solar cells using p-type poly (9-vinylcarbazole) modified the interface of perovskite/mesoporous TiO2 layers

Jiaji Duan, Yuning Liu, Xiaohong Chen, Sumei Huang, Wei Ou-Yang, Guang Zhu, Sanjun Zhang, Zhuo Sun

Publisher page

Abstract

Abstract A p-type poly(9-vinylcarbazole) (PVC) was inserted into the interface between perovskite and mesoporous TiO2 electron transport layers. The ultrathin PVC modified TiO2 layer can obviously improve the crystallinity of perovskite layer with less pinholes, passivate the interface and inhibit hole carriers transport into the interface of perovskite/TiO2 electron transport layers. The perovskite film modified with PVC shows larger grain sizes and more compact films, which helps to increase photocurrent and reduce the leak current of cells. The passivating interface with less hole carrier accumulation and hydrophobicity can greatly reduce carrier recombination, improve carrier transport and extraction abilities and cells stability. Therefore, perovskite solar cells (PSCs) with PVC modified TiO2 layer exhibited a power conversion efficiency (PCE) of 19.02%, which is remarkably higher than that (16.09%) of the reference cells. Furthermore, PSCs without and with PVC modification respectively retained 20% and 55% of the initial PCE values aging for 30 days at the relative humidity 15% in air without encapsulation. For thermal stability test, the pervoskite layers were heated for 10 h at 100 °C before further spin-coating Spiro-OMeTAD, PSCs with PVC modification were still remained 70% of the original PCEs, which is greatly higher than that (30%) of the reference cells. These results indicate that PSCs with PVC modified TiO2 layer can effectively improve PCEs and show better moisture resistance and thermal stability.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Perovskite Materials and Applications · Conducting polymers and applications · Organic Electronics and Photovoltaics

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (45)

Show source-provided references
1. National Renewable Energy Laboratory (NREL)
2. Nano-structured electron transporting materials for perovskite solar cells10.1039/C5NR05207F ↗
3. Efficiency enhancement of perovskite solar cells through fast electron extraction: the role of graphene quantum dots10.1021/ja4132246 ↗
4. Boron and phosphorus co-doped carbon counter electrode for efficient hole-conductor-free perovskite solar cell10.1016/j.cej.2016.12.050 ↗
5. Cesium-containing triple cation perovskite solar cells: improved stability, reproducibility and high efficiency10.1039/C5EE03874J ↗
6. Self-formed grain boundary healing layer for highly efficient CH3NH3PbI3 perovskite solar cells10.1038/nenergy.2016.81 ↗
7. Low-temperature processed ultrathin TiO2 for efficient planar heterojunction perovskite solar cells10.1016/j.electacta.2017.02.028 ↗
8. Efficient planar heterojunction perovskite solar cells with Li-doped compact TiO 2 layer10.1016/j.nanoen.2016.11.028 ↗
9. Perovskite solar cells with a planar heterojunction structure prepared using room-temperature solution processing techniques10.1038/nphoton.2013.342 ↗
10. Flexible, low-temperature, solution processed ZnO-based perovskite solid state solar cells10.1039/c3cc46534a ↗
11. Improving the extraction of photogenerated electrons with SnO2Nanocolloids for efficient planar perovskite solar cells10.1002/adfm.201501264 ↗
12. SnO 2 nanotube arrays grown via an in situ template-etching strategy for effective and stable perovskite solar cells10.1016/j.cej.2017.05.085 ↗
13. Enhanced electronic properties in mesoporous TiO2 via lithium doping for high-efficiency perovskite solar cells10.1038/ncomms10379 ↗
14. High-performance perovskite solar cells by incorporating a ZnGa2O4:Eu3+ nanophosphor in the mesoporous TiO2 layer10.1016/j.solmat.2016.01.021 ↗
15. Effective improvement of the photovoltaic performance of carbon-based perovskite solar cells by additional solvents10.1007/s40820-016-0094-4 ↗
16. Efficient luminescent solar cells based on tailored mixed-cation perovskites10.1126/sciadv.1501170 ↗
17. TiO2 sub-microsphere film as scaffold layer for efficient perovskite solar cells10.1021/acsami.5b08421 ↗
18. Efficient and stable solution-processed planar perovskite solar cells via contact passivation10.1126/science.aai9081 ↗
19. Mg-doped TiO2 boosts the efficiency of planar perovskite solar cells to exceed 19%10.1039/C6TA06879K ↗
20. Sn-doped TiO2nanorod arrays and application in perovskite solar cells10.1039/C4RA11155A ↗
21. Interface design of hybrid electron extraction layer for relieving hysteresis and retarding charge recombination in perovskite solar cells10.1002/admi.201800993 ↗
22. Polymer-assisted construction of mesoporous TiO2 layers for improving perovskite solar cell performance10.1021/acs.jpcc.5b07950 ↗
23. Organic photorefractives: mechanisms, materials, and applications10.1021/cr960055c ↗
24. High diffraction efficiency at low electric field in photorefractive polymers doped with arylimine chromophores10.1088/0022-3727/42/7/075102 ↗
25. Performance and stability of PTB7:PC71BM based polymer solar cells, with ECZ and/or PVK dopants, under the application of an external electric field10.1007/s10854-016-4559-5 ↗
26. High efficiency and stability of inverted perovskite solar cells using phenethyl ammonium iodide-modified interface of NiOx and perovskite layers10.1021/acsami.9b18217 ↗
27. Enhanced efficiency and thermal stability of perovskite solar cells using poly(9-vinylcarbazole) modified perovskite/PCBM interface10.1016/j.electacta.2019.06.102 ↗
28. A two-stage annealing strategy for crystallization control of CH3NH3PbI3 films toward highly reproducible perovskite solar cells10.1002/smll.201800181 ↗
29. Dye-sensitized solar cells based on a novel fluorescent dye with a pyridine ring and a pyridinium dye with the pyridinium ring forming strong interactions with nanocrystalline TiO2 films10.1002/ejoc.200900983 ↗
30. Controlling thin-film stress and wrinkling during perovskite film formation10.1021/acsenergylett.8b00544 ↗
31. Two-dimensional ruddlesden-Popper perovskite with nanorod-like morphology for solar cells with efficiency exceeding 15%10.1021/jacs.8b04604 ↗
32. Understanding film formation morphology and orientation in high member 2D ruddlesden-Popper perovskites for high-efficiency solar cells10.1002/aenm.201700979 ↗
33. Enhancing the efficiency of low-temperature planar perovskite solar cells by modifying the interface between perovskite and hole transport layer with polymers10.1016/j.electacta.2017.12.135 ↗
34. Constructing efficient and stable perovskite solar cells via interconnecting perovskite grains10.1021/acsami.7b08488 ↗
35. Amazing stable open-circuit voltage in perovskite solar cells using AgAl alloy electrode10.1016/j.solmat.2015.11.026 ↗
36. Large planar pi-conjugated porphyrin for interfacial engineering in p-i-n perovskite solar cells10.1021/acsami.6b10342 ↗
37. Efficient quasi-mesoscopic perovskite solar cells using Li-doped hierarchical TiO2 as scaffold of scattered distribution10.1016/j.cej.2017.08.045 ↗
38. Enhanced efficiency and stability of perovskite solar cells via anti-solvent treatment in two-step deposition method10.1021/acsami.7b01136 ↗
39. Vacuum deposited triple-cation mixed-halide perovskite solar cells10.1002/aenm.201703506 ↗
40. Hysteresis-less inverted CH3NH3PbI3 planar perovskite hybrid solar cells with 18.1% power conversion efficiency10.1039/C5EE00120J ↗
41. Highly efficient and stable inverted perovskite solar cell obtained via treatment by semiconducting chemical additive10.1002/adma.201805554 ↗
42. Charge carrier mobility and lifetime of organic bulk heterojunctions analyzed by impedance spectroscopy10.1016/j.orgel.2008.06.007 ↗
43. Interpretation and evolution of open-circuit voltage, recombination, ideality factor and subgap defect states during reversible light-soaking and irreversible degradation of perovskite solar cells10.1039/C7EE02415K ↗
44. Enhanced long-term stability of perovskite solar cells by 3-hydroxypyridine dipping10.1039/C6CC09492A ↗
45. Energy level alignment and hole injection property of poly(9-vinylcarbazole)/indium tin oxide interface10.1016/j.cplett.2018.06.014 ↗