Low-voltage programmable/erasable high performance flexible organic transistor nonvolatile memory based on a tetratetracontane passivated ferroelectric terpolymer
Source abstract
Abstract
Abstract Future flexible electronic systems require memory devices combining low power consumption and mechanical bendability. However, high programming/erasing (P/E) voltages, which are universally required to switch the storage states in previously reported ferroelectric organic field-effect transistor (Fe-OFET) nonvolatile memories (NVMs), severely prevent their practical applications. In this work, we develop a novel route to achieve a low-voltage programmable/erasable flexible Fe-OFET NVM. Ferroelectric terpolymer poly(vinylidene-fluoride-trifluoroethylene-chlorotrifluoroethylene) [P(VDF-TrFE-CTFE)], rather than the conventional ferroelectric copolymer poly(vinylidene-fluoride-trifluoroethylene) [P(VDF-TrFE)], is used as the gate dielectric. The low coercive field of P(VDF-TrFE-CTFE) is the main contribution to the low-voltage operation in the Fe-OFET NVM, even with a relative thick ferroelectric gate dielectric layer. By depositing a long-chain alkane molecule Tetratetracontane (TTC) as the passivation layer on the surface of P(VDF-TrFE-CTFE) film, the layer-by-layer growth mode of semiconductor pentacene is obtained, which results in a large crystalline grain and good interface morphology at the channel/dielectric. Therefore, the mobility of Fe-OFET NVMs is greatly improved. As a result, a high performance flexible Fe-OFET NVM is achieved, with a low P/E voltage of ±15 V, high mobility up to 0.5 cm2 V−1 s−1, reliable P/E endurance property over 1000 cycles, stable data storage retention capability over 6000 s, and excellent mechanical bending durability without visible degradation after 2000 repetitive tensile bending cycles at a small curvature radius of 4.0 mm.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Advanced Sensor and Energy Harvesting Materials · Semiconductor materials and devices · Ferroelectric and Piezoelectric Materials
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (39)
Show source-provided references
1. Ferroelectric memories10.1126/science.246.4936.1400 ↗
2. Organic materials for printed electronics10.1038/nmat1817 ↗
3. Ferroelectric polarization induces electric double layer bistability in electrolyte-gated field-effect transistors10.1021/am404494h ↗
4. Organic non-volatile memories from ferroelectric phase-separated blends10.1038/nmat2207 ↗
5. A nonvolatile memory element based on an organic field-effect transistor10.1063/1.1788887 ↗
6. High-performance solution-processed polymer ferroelectric field-effect transistors10.1038/nmat1329 ↗
7. Flexible NAND-like organic ferroelectric memory array10.1109/LED.2014.2313029 ↗
8. Speed up ferroelectric organic transistor memories by using two-dimensional molecular crystalline semiconductors10.1021/acsami.7b03785 ↗
9. Controlling the on/off current ratio of ferroelectric field-effect transistors10.1038/srep12094 ↗
10. Printed nonvolatile memory for a sheet-type communication system10.1109/TED.2009.2015169 ↗
11. Low-voltage polymer field-effect transistors for nonvolatile memories10.1063/1.2132062 ↗
12. Flexible low voltage nonvolatile memory transistors with pentacene channel and ferroelectric polymer
13. Nonvolatile polymer memory with nanoconfinement of ferroelectric crystals10.1021/nl103094e ↗
14. High-mobility nonvolatile memory thin-film transistors with a ferroelectric polymer interfacing ZnO and pentacene channels10.1002/adma.200900398 ↗
15. Boost up Carrier mobility for ferroelectric organic transistor memory via buffering interfacial polarization fluctuation10.1038/srep07227 ↗
16. Non-volatile ferroelectric poly(vinylidene fluoride-co-trifluoroethylene) memory based on a single-crystalline tri-isopropylsilylethynyl pentacene field-effect transistor10.1002/adfm.200801097 ↗
17. Enhancing the retention properties of ZnO memory transistor by modifying the channel/ferroelectric polymer interface10.1063/1.3247881 ↗
18. Epitaxial growth of thin ferroelectric polymer films on graphene layer for fully transparent and flexible nonvolatile memory10.1021/acs.nanolett.5b03882 ↗
19. Non-volatile organic memory with sub-millimetre bending radius10.1038/ncomms4583 ↗
20. Flexible nonvolatile organic ferroelectric memory transistors fabricated on polydimethylsiloxane elastomer10.1016/j.orgel.2014.08.051 ↗
21. Printable ferroelectric PVDF/PMMA blend films with ultralow roughness for low voltage non-volatile polymer memory10.1002/adfm.200900589 ↗
22. High performance multi-level non-volatile polymer memory with solution-blended ferroelectric polymer/high- k insulators for low voltage operation10.1002/adfm.201300372 ↗
23. Dependence of threshold thickness of crystallization and film morphology on film processing conditions in poly(vinylidene fluoride–trifluoroethylene) copolymer thin films10.1063/1.1503395 ↗
24. Kinetics of ferroelectric switching in ultrathin films10.1103/PhysRevB.68.094113 ↗
25. Enhanced ferroelectric property of P(VDF-TrFE-CTFE) film using room-temperature crystallization for high-performance ferroelectric device applications10.1002/aelm.201600225 ↗
26. Controlled topology of block copolymer gate insulators by selective etching of cylindrical microdomains in pentacene organic thin film transistors10.1002/adfm.200701034 ↗
27. Surface modification of a ferroelectric polymer insulator for low-voltage readable nonvolatile memory in an organic field-effect transistor
28. Non-volatile organic ferroelectric memory transistors fabricated using rigid polyimide sslands on an elastomer substrate10.1039/C6TC00083E ↗
29. Bipolar charge transport in organic field-effect transistors: enabling high mobilities and transport of photo-generated charge carriers by a molecular passivation layer10.1016/j.orgel.2012.04.032 ↗
30. Achievement of balanced electron and hole mobility in copper-phthalocyanine field-effect transistors by using a crystalline aliphatic passivation layer10.1016/j.orgel.2011.02.001 ↗
31. Organic semiconductor growth and morphology considerations for organic thin-film transistors10.1002/adma.200903193 ↗
32. Morphology optimization for achieving air stable and high performance organic field effect transistors10.1016/j.orgel.2013.03.027 ↗
33. Interface optimization using diindenoperylene for C60 thin film transistors with high electron mobility and stability10.1016/j.orgel.2014.07.010 ↗
34. High-mobility copper-phthalocyanine field-effect transistors with tetratetracontane passivation layer and organic metal contacts10.1063/1.3354086 ↗
35. An orientation-controlled pentacene film aligned by photoaligned polyimide for organic thin-film transistor applications10.1002/adfm.200305047 ↗
36. High-performance solution-processed triisopropylsilylethynyl pentacene transistors and inverters fabricated by using the selective self-organization technique10.1063/1.2987419 ↗
37. Flexible nonvolatile memory transistors using indium gallium zinc oxide-channel and ferroelectric polymer poly(vinylidene fluoride-co-trifluoroethylene) fabricated on elastomer substrate10.1116/1.4927367 ↗
38. Mechanical strain induced changes in electrical characteristics of flexible, non-volatile ferroelectric OFET based memory10.1016/j.orgel.2016.10.036 ↗
39. High speed epitaxial perovskite memory on flexible substrates10.1002/adma.201605699 ↗