Ultrasensitive and low temperature gas sensor based on electrospun organic-inorganic nanofibers
Source abstract
Abstract
Organic-inorganic hybrid material is one of the most promising materials for high performance gas sensors due to its improved properties like high sensitivity, selectivity, fast response time, flexibility and low power consumption. This work presents ultrasensitive, selective and low operating temperature H2S gas sensor. It is based on metal-oxide nanoparticles (NPs) embedded in organic semiconductor polymeric nanofibrous (NFs) membrane containing an ionic liquid (IL). In this context, high surface area Tungsten(VI) oxide- Polyvinyl alcohol (WO3-PVA) nanofibrous composite sensor material with average diameter of 130 ± 20 nm were synthesized with controlled morphology and interconnectivity through an electrospinning technique. The obtained WO3 NPs-containing PVA nanofibrous sensing material was evaluated for its ability as a potential sensor for H2S gas at different operating temperatures and gas concentrations. Results demonstrated that the fabricated sensor is ultrasensitive and selective for H2S gas and exhibit an excellent reproducibility, and long-term stability. Furthermore, the sensor showed adequate response in a humid environment. It was also shown that nanofibers' membrane porosity and thickness control the sensing performance. The optimum operating temperature of 40°C with a detection threshold as low as 100 ppb with a response time of 16.37 ± 1.42 s were achieved. This combined high sensitivity, fast response time and low operating temperature (low-power consumption) provides clear evidence of the sensor's potential to outperform existing devices, which could pave the way for a commercial exploitation.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Gas Sensing Nanomaterials and Sensors · Advanced Chemical Sensor Technologies · Analytical Chemistry and Sensors
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (65)
Show source-provided references
1. Air pollution and daily mortality: associations with particulates and acid aerosols10.1016/S0013-9351(05)80042-8 ↗
2. Hazards of volcanic gases
3. Safety and Health Topics/Hydrogen Sulfide - Hazards. (n.d). Retrieved from:https://www.osha.gov/SLTC/hydrogensulfide/hazards.html.
4. Characterization of malodorous sulfur compounds in landfill gas10.1016/j.atmosenv.2004.09.083 ↗
5. The emission characteristics and the related malodor intensities of gaseous reduced sulfur compounds (RSC) in a large industrial complex10.1016/j.atmosenv.2006.04.026 ↗
6. Semiconducting metal oxides as sensors for environmentally hazardous gases10.1016/j.snb.2011.08.032 ↗
7. Room-temperature H2S gas sensing at ppb level by single crystal In2O3 whiskers10.1016/j.snb.2008.03.003 ↗
8. Effects of agriculture reclamation on the hydrologic characteristics in the Sanjiang Plain, China10.1007/s11769-001-0037-x ↗
9. Electrochemical H2S sensor with H2SO4 pre-treated Nafion membrane as solid polymer electrolyte10.1016/S0925-4005(02)00200-9 ↗
10. Study of highly sensitive smell sensing system using gas detector tube combined with optical sensor10.1016/j.snb.2005.11.068 ↗
11. Low-cost colorimetric sensor for the quantitative detection of gaseous hydrogen sulfide10.1016/j.snb.2008.04.046 ↗
12. Quantification of CO2, SO2, NH3, and H2S with a single coated piezoelectric quartz crystal10.1016/S0925-4005(00)00432-9 ↗
13. "A Novel QCM-based biosensor for detection of microorganisms producing hydrogen sulfide10.1080/00032710802238028 ↗
14. An activation process for increased sensitivity of a SAW gas microsensor
15. Heeger · 2001 · 247
16. “Synthetic metals”: a novel role for organic polymers10.1016/S1567-1739(01)00051-7 ↗
17. The discovery of polyacetylene film: the dawning of an era of conducting polymers10.1016/S0379-6779(01)00507-0 ↗
18. A new detector for gaseous components using semiconductive thin films10.1021/ac60191a001 ↗
19. A review of sensor-based methods for monitoring hydrogen sulfide10.1016/j.trac.2011.08.008 ↗
20. Fabrication of polyaniline-based gas sensors using piezoelectric inkjet and screen printing for the detection of hydrogen sulfide10.1109/JSEN.2010.2044996 ↗
21. Polyaniline nanofiber composites with metal salts: chemical sensors for hydrogen sulfide10.1002/smll.200400155 ↗
22. Conducting polymers in chemical sensors and arrays10.1016/j.aca.2008.02.068 ↗
23. Portable oral malodor analyzer using highly sensitive In2O3 gas sensor combined with a simple gas chromatography system10.1016/S0003-2670(02)01038-3 ↗
24. Hydrothermal synthesis of In2O3 for detecting H2S in air10.1016/j.snb.2005.10.038 ↗
25. Ultrahigh-sensitive tin-oxide microsensors for H/sub 2/S detection10.1109/JSEN.2004.828858 ↗
26. Enhanced H2S sensing characteristics of SnO2 nanowires functionalized with CuO10.1016/j.snb.2009.07.052 ↗
27. Response speed of SnO 2-based H 2 S gas sensors with CuO nanoparticles10.1063/1.1646760 ↗
28. Suspended CuO nanowires for ppb level H2S sensing in dry and humid atmosphere10.1016/j.snb.2013.06.044 ↗
29. Gas sensing selectivity of hexagonal and monoclinic WO3 to H2S10.1016/j.solidstatesciences.2010.01.019 ↗
30. Highly sensitive and selective hydrogen sulfide and toluene sensors using Pd functionalized WO3 nanofibers for potential diagnosis of halitosis and lung cancer10.1016/j.snb.2013.12.011 ↗
31. Self-assembly gridding α-MoO3 nanobelts for highly toxic H2S gas sensors10.1016/j.snb.2016.06.104 ↗
32. Enhanced hydrogen sulfide sensing properties of Pt-functionalized α-Fe2O3 nanowires prepared by one-step electrospinning10.1016/j.snb.2017.07.055 ↗
33. Low-temperature H2S sensors based on Ag-doped α-Fe2O3 nanoparticles10.1016/j.snb.2007.11.002 ↗
34. Nano-crystalline tungsten oxide NO2 sensor10.1016/S0925-4005(03)00383-6 ↗
35. Dilute hydrogen sulfide sensing properties of CuO–SnO2 thin film prepared by low-pressure evaporation method10.1016/S0925-4005(98)00144-0 ↗
36. H2S gas sensing properties of nanocrystalline Cu-doped ZnO thin films prepared by advanced spray pyrolysis10.1016/j.snb.2013.05.073 ↗
37. Low concentration H2S detection of CdO-decorated hierarchically mesoporous NiO nanofilm with wrinkle structure10.1016/j.snb.2016.02.128 ↗
38. Ultrasensitive and ultraselective detection of H2S using electrospun CuO-loaded In2O3 nanofiber sensors assisted by pulse heating10.1016/j.snb.2014.11.130 ↗
39. Importance of the nanograin size on the H2S-sensing properties of ZnO–CuO composite nanofibers10.1016/j.snb.2015.03.012 ↗
40. Facile synthesis of reduced graphene oxide/hexagonal WO3 nanosheets composites with enhanced H2S sensing properties10.1016/j.snb.2016.02.134 ↗
41. Highly sensitive and selective H2S sensor based on porous ZnFe2O4 nanosheets10.1016/j.snb.2017.02.100 ↗
42. H2S sensing in the ppb regime with zinc oxide nanowires10.1016/j.snb.2016.08.023 ↗
43. Au decoration of a graphene microchannel for self-activated chemoresistive flexible gas sensors with substantially enhanced response to hydrogen10.1039/C8NR09076A ↗
44. Enhancement of hydrogen sulfide gas sensing of PbS colloidal quantum dots by remote doping through ligand exchange10.1016/j.snb.2015.02.047 ↗
45. Facile on-chip electrospinning of ZnFe2O4 nanofiber sensors with excellent sensing performance to H2S down ppb level10.1016/j.jhazmat.2018.07.084 ↗
46. Detection of H2S down to ppb levels at room temperature using sensors based on ZnO nanorods10.1016/j.snb.2005.03.011 ↗
47. Design, fabrication, and characterization of portable gas sensors based on spinel ferrite nanoparticles embedded in organic membranes10.1016/j.snb.2016.10.016 ↗
48. Design, fabrication, and characterization of low-power gas sensors based on organic-inorganic nano-composite10.1016/j.orgel.2016.12.050 ↗
49. Selective H2S sensor based on CuO nanoparticles embedded in organic membranes10.1016/j.snb.2016.03.078 ↗
50. Physical properties of PVA doped with algal glycerol10.1002/app.39715 ↗
51. Investigations on electrical properties of poly (vinyl alcohol) doped with 1-methyl-3-n-decyl-imidazolium bromide ionic liquid10.1016/j.cap.2012.03.004 ↗
52. Applications of ionic liquids in electrochemical sensors10.1016/j.aca.2007.12.011 ↗
53. Enhancement of H2S sensing performance of p-CuO nanofibers by loading p-reduced graphene oxide nanosheets10.1016/j.snb.2018.10.144 ↗
54. Electrospun Cu-doped ZnO nanofibers for H2S sensing10.1016/j.snb.2011.01.070 ↗
55. DiameterJ: a validated open source nanofiber diameter measurement tool10.1016/j.biomaterials.2015.05.015 ↗
56. Electrospinning fabrication and characterization of poly (vinyl alcohol)/montmorillonite/silver hybrid nanofibers for antibacterial applications10.1007/s00396-009-2147-4 ↗
57. Electrospun polycaprolactone/ZnO nanocomposite membranes as biomaterials with antibacterial and cell adhesion properties10.1007/s10965-013-0347-6 ↗
58. Modification of poly (vinyl alcohol) with acid chlorides and crosslinking with difunctional hardeners10.1002/(SICI)1099-0518(19960430)34:6<925::AID-POLA1>3.0.CO;2-H ↗
59. H2S gas sensing properties of CuO-functionalized WO3 nanowires10.1016/j.ceramint.2014.03.120 ↗
60. Metal oxides for solid-state gas sensors: what determines our choice?10.1016/j.mseb.2007.01.044 ↗
61. Preparation and gas sensitivity of WO3 hollow microspheres and SnO2 doped heterojunction sensors10.1016/j.mssp.2013.05.012 ↗
62. Low-power, fast, selective nanoparticle-based hydrogen sulfide gas sensor10.1063/1.3703761 ↗
63. Polythiophene-WO3 hybrid architectures for low-temperature H2S detection10.1016/j.snb.2014.02.038 ↗
64. Fast responding exhaled-breath sensors using WO3 hemitubes functionalized by graphene-based electronic sensitizers for diagnosis of diseases10.1021/am501394r ↗
65. Highly selective and sensitive response of 30.5% of sprayed molybdenum trioxide (MoO3) nanobelts for nitrogen dioxide (NO2) gas detection10.1016/j.jcis.2016.08.031 ↗