Impact of excess lead on the stability and photo-induced degradation of lead halide perovskite solar cells
Source abstract
Abstract
Abstract The stability of perovskite solar cells exposed to prolonged solar irradiation is a major concern that has not been thoroughly investigated in the past. In this investigation, devices fabricated with the architecture, glass/ITO/PEDOT:PSS/MAPbI3/PCBM/Ag using Pb acetate as a source material, were found to operate with an efficiency of about 13%. Adding excess amounts of Pb to the precursor resulted in a presence of Pb in the perovskite (PVS) active layer. In addition, the impact of photo-induced degradation on the device efficiency was investigated. X-ray Diffraction and Time-resolved Photoluminescence analyses were used to evaluate the impact of excess Pb before and after illumination. The results indicate that changes in the crystallinity occur without any significant decrease in charge carrier lifetimes, and this is attributed to the formation of the degradation product, PbI2. This by-product has been shown to have beneficial effects due to its influence in passivating grain boundaries and in altering the band structure at the interface between the active layer and the electron transport layer. This work demonstrates that 5 mol% excess Pb is the optimal concentration with respect to efficiency and stability of these devices. The devices can retain more than 50% of their initial efficiency after 1 h of simulated solar exposure, when compared to 0 mol% and 10 mol% excess Pb samples.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Perovskite Materials and Applications · Chalcogenide Semiconductor Thin Films · Quantum Dots Synthesis And Properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (31)
Show source-provided references
1. Efficient tandem polymer solar cells fabricated by all-solution processing10.1126/science.1141711 ↗
2. Plastic solar cells10.1002/1616-3028(200102)11:1<15::AID-ADFM15>3.0.CO;2-A ↗
3. Polymer solar cells with enhanced open-circuit voltage and efficiency10.1038/nphoton.2009.192 ↗
4. Organometal halide perovskites as visible-light sensitizers for photovoltaic cells10.1021/ja809598r ↗
5. Efficient hybrid solar cells based on meso-superstructured organometal halide perovskites10.1126/science.1228604 ↗
6. Interface engineering of highly efficient perovskite solar cells
7. Solvent engineering for high-performance inorganic-organic hybrid perovskite solar cells10.1038/nmat4014 ↗
8. Efficient and stable solution-processed planar perovskite solar cells via contact passivation10.1126/science.aai9081 ↗
9. Low-temperature processed meso-superstructured to thin-film perovskite solar cells10.1039/c3ee40810h ↗
10. Improving the long-term stability of perovskite solar cells with a porous Al 2 O 3 buffer layer10.1021/jz502703p ↗
11. Kinetics of ion transport in perovskite active layers and its implications for active layer stability10.1021/jacs.5b08535 ↗
12. A vacuum flash-assisted solution process for high-efficiency large-area perovskite solar cells10.1126/science.aaf8060 ↗
13. Mesoporous SnO2electron selective contact enables UV-stable perovskite solar cells10.1016/j.nanoen.2016.10.055 ↗
14. Overcoming ultraviolet light instability of sensitized TiO2 with meso-superstructured organometal tri-halide perovskite solar cells10.1038/ncomms3885 ↗
15. Effects of surface blocking layer of Sb2S3 on nanocrystalline TiO2 for CH3NH3PbI3 perovskite solar cells10.1021/jp500449z ↗
16. Temperature- and component-dependent degradation of perovskite photovoltaic materials under concentrated sunlight10.1021/jz502642b ↗
17. Photo-induced degradation of lead halide perovskite solar cells caused by the hole transport layer/metal electrode interface10.1039/C5TA08622A ↗
18. Degradation of methylammonium lead iodide perovskite structures through light and electron beam driven ion migration10.1021/acs.jpclett.5b02828 ↗
19. Degradation of organometallic perovskite solar cells induced by trap states10.1063/1.4943019 ↗
20. Light-activated photocurrent degradation and self-healing in perovskite solar cells10.1038/ncomms11574 ↗
21. Degradation mechanisms of solution-processed planar perovskite solar cells: thermally stimulated current measurement for analysis of Carrier traps10.1002/adma.201502610 ↗
22. Effect of annealing temperature on film morphology of organic-inorganic hybrid pervoskite solid-state solar cells10.1002/adfm.201304022 ↗
23. Improved performance and stability of perovskite solar cells by crystal crosslinking with alkylphosphonic acid omega-ammonium chlorides10.1038/nchem.2324 ↗
24. Stabilized wide bandgap perovskite solar cells by tin substitution10.1021/acs.nanolett.6b03857 ↗
25. Pinhole-free perovskite films for efficient solar modules10.1039/C5EE03703D ↗
26. Multifunctional Benzoquinone additive for efficient and stable planar perovskite solar cells10.1002/adma.201603808 ↗
27. Effect of excessive Pb content in the precursor solutions on the properties of the lead acetate derived CH3NH3PbI3perovskite solar cells10.1016/j.solmat.2017.09.039 ↗
28. Temperature- and component-dependent degradation of perovskite photovoltaic materials under concentrated sunlight10.1021/jz502642b ↗
29. Femtosecond time-resolved transient absorption spectroscopy of CH3NH3PbI3 perovskite films: evidence for passivation effect of PbI2
30. Controllable self-induced passivation of hybrid lead iodide perovskites toward high performance solar cells10.1021/nl501838y ↗
31. Benefits of very thin PCBM and LiF layers for solution-processed p–i–n perovskite solar cells10.1039/C4EE01216J ↗